Group A racecars were the top of their class in both touring car and rally racing. Heavily modified and extremely fast these cars set out to demonstrate the best of what a manufacturer could do on the racetrack. It was the predecessor to the current DTM class racing and set a standard for many other divisions of motorsport to follow.  

One of the weaker points of the S14 engine, when speaking from a racing standpoint is the belt drive system. While fine for a street going car, a V-belt is not suitable for high RPM applications. On the track, most of your time will be spent in the higher rev range which puts extreme amounts of stress on the factory setup. BMW realised this and came up with a solution that involved doing away with the V belt system and using a 6 rib serpentine style instead.

Extremely resistant to slippage and failure this design holds up much better the abuse of track duty and won't leave you stranded and waiting for tow back to the pit. Additionally, this kit does not accommodate and a/c compressor and the alternator and waterpump are underdriven by way of slightly larger pulleys. Combined, this puts less of a load on the crankshaft which leads to more efficient power delivery to the ground. If you track you E30 M3, this is an essential upgrade and until now was extremely difficult to source. Do not skip this pivotal step in your engine build or overhaul and get a leg up on the competition the Group A way.
Please note this kit is special order and in non-returnable

Features:​

• Kit replaces all engine pulleys and crank damper
• Includes 6 rib serpentine belt
• Underdriven waterpump and alternator pulleys
• Recommended for off road and racing use only 

This kit fits the following BMWs:
1986-1992 BMW M3 All 
 

Secure your hoses with the 1/2"/12mm Band Hose Clamp. This high-quality hose clamp ensures a tight and reliable seal for various applications. With its durable construction and easy installation, it's the perfect solution for securing hoses in automotive, industrial, and household settings. Say goodbye to leaks and enjoy peace of mind with this essential hose clamp.

• Ensures a tight and reliable seal
• Durable construction for long-lasting use
• Easy installation for convenience
• Suitable for automotive, industrial, and household applications

If you're the proud owner of an S14-equipped, chances are you're passionate about enhancing your vehicle's performance and longevity. One crucial upgrade that can significantly improve your driving experience is Turner Motorsport's WPC Rod Bearing Replacement Kit, designed for enhanced durability and wear protection. Prevent costly mechanical failures and increase engine life with our WPC-Treated Performance Rod Bearing Service Kit!

Enhanced Durability: The WPC Performance Rod Bearing Replacement Kit is designed with superior materials and manufacturing processes. WPC treatment reinforces the surface of the bearings, making them highly resistant to wear, which is essential for aging engines like the S14. This durability ensures your engine will stand the test of time, even under strenuous driving conditions. Improved Performance: By reducing friction and wear, WPC-treated rod bearings allow for smoother and more efficient engine operation. This translates into increased power and responsiveness, providing you with a more exhilarating driving experience. Whether you're tearing up the track or enjoying a spirited weekend drive, you'll notice a difference in your vehicle's performance. Preventative Maintenance: Proactively replacing your rod bearings and bolts with the WPC Performance Kit can prevent potential engine failures. As engines age and accumulate miles, wear and tear become inevitable. These components help you address this issue head-on, preventing costly engine damage and repairs down the road. This is especially crucial for BMW E30 M3 owners who value their investment. Long-Term Cost Savings: While the initial investment in a WPC Performance Rod Bearing Replacement Kit may seem substantial, it's a small price to pay for the long-term benefits. Preventing engine failure and costly repairs can save you thousands of dollars over the life of your vehicle, not to mention the peace of mind that comes with knowing your BMW is built for reliability. Included in the kit:

8 - Turner Motorsport WPC-Treated "Race Series" Rod Bearing Shells 1 - Oil Pan Gasket 1 - Oil Filter Kit 1 - Oil Drain Plug 8 - Genuine BMW Connecting Rod Bolts 1 - Liqui Moly 10w-40 Engine Oil - 5 Liters 1 - Liqui Moly 10w-40 Engine Oil - 1 Liters 1 - Assembly Lube - 4 oz

MAGNETIC FENDER COVER:

Protect your finish when working under the hood with a high quality Turner fender cover. Made from a synthetic leather layer with a goose flannelette backing for durability and protection. The Turner fender cover holds a tight grip to your fender or core support with four 9.5" magnets sewn into the top layer.

Features:

• Durable synthetic leather with the Turner logo
• Soft goose flannelette backing
• Four 9.5" integrated magnets

Dimensions:

•  Extra Long 20" x 47"

TELESCOPING LED MIRROR:

You are going to love this tool. This Schwaben telescoping lighted mirror can get you out of a jam when you need to look at something you can not see any other way. Use with or with out the mirror attached. Lighting can reflect on mirror to light at many angles. Great for finding missing parts beneath engine block or oil leaks.

Features:

• Handy pocket clip
• Pivoting quick attach mirror for perfect viewing at any angle.
• Extends up to 26 1/4" for hard to reach places.
• Collapsed length 6.5" without mirror attached, 9.5" with 
• High quality mirror provided a perfect reflection.
• Easy on and off. Turns on when extended and off when collapsed.
• 44,000 MCD brightness.
• Long life span up to 100,000 hours on LED bulb.
• Operates on 3 AG3/LR41 batteries 
• Includes batteries

TELESCOPING MAGNET:

This Schwaben telescoping magnet is a great addition to any tool box. Magnet is rated to pickup 3.5 lbs. Stainless steel shaft is 7" collapsed and 26" extended. Magnet is encased in a aluminum sleeve to help prevent side of magnet from sticking. Cushion grip rubber handle works great with dry or oily hands.

MAGNETIC PARTS TRAYS:

Stop losing nuts, blots, and screws. The Schwaben magnetic parts tray has a large 4-3/8 inch diameter stainless steel bowl with a rubber-coated magnetic base that won't mar painted surfaces.

Attach the tray to any ferrous metal on the vehicle, and toss in your steel fasteners as you remove them. The magnet holds them safely in place until you are ready to use them again. Works right side up or inverted for under-car repairs.

A simple, effective solution to a common problem.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

INA - Camshaft Sprocket for BMW Engine Timing

INA - Camshaft Sprocket is an essential component for maintaining precise engine timing and optimal performance in your BMW. This high-quality sprocket ensures smooth synchronization between the camshaft and crankshaft, enhancing combustion efficiency and reducing wear on the timing chain. Manufactured to meet OEM standards, this part is available through Turner Motorsport, ensuring a reliable and durable solution for a variety of BMW models.

Key Benefits:

• OEM-quality part specifically designed for BMW engines
• Guarantees precise timing for improved engine efficiency and power delivery
• Crafted from durable materials to withstand extreme operating conditions
• Reduces strain on the timing chain and other engine components
• Engineered for a perfect fit, ensuring easy installation and reliable operation

Upgrade your BMW's performance with the INA - Camshaft Sprocket, a trusted choice for maintaining engine reliability and efficiency. Available at Turner Motorsport, this component is ideal for repairs, maintenance, and performance tuning.

E Pistons 8.5:1 Piston Kit - BMW S14B23 Engine (Set of 4)

Unleash the full potential of your BMW S14B23 engine with the JE Pistons 8.5:1 Compression Kit, engineered for maximum strength and reliability in forced induction builds. Perfect for turbocharged or supercharged applications, these pistons are designed to handle high boost levels, ensuring your engine can withstand extreme pressures while delivering smooth, consistent performance.

Key Benefits:

• Optimized Compression (8.5:1): Lower compression ratio designed specifically for turbo or supercharged setups, helping manage cylinder pressures for greater tuning flexibility and boost potential.
• Forged for Toughness: Crafted from 2618 aluminum alloy, these pistons are forged to withstand extreme stress and temperature, making them ideal for high-boost, high-revving engines.
• Thermal Efficiency & Durability: Enhanced heat dissipation design reduces the risk of detonation, allowing your engine to run cooler under heavy load.
• Friction-Reducing Skirt Coating: Helps to reduce wear, improving the longevity of both the pistons and the engine, even under intense driving conditions.
• Complete Installation Kit: Comes with four pistons, rings, wrist pins, and locks, providing everything you need for a smooth installation process.

Why Choose JE Pistons?

JE Pistons are a trusted name in motorsport for delivering unbeatable strength and performance. This 8.5:1 piston kit allows you to push your BMW S14B23 engine to new limits with confidence, whether it’s for track use, drag racing, or a high-performance street build.

Applications:

• Fits BMW S14B23 Engines (E30 M3, high-performance builds)
• Ideal for turbocharged or supercharged configurations.

Technical Specifications:

• Compression Ratio: 8.5:1 for optimal forced induction performance.
• Material: Forged 2618 aluminum alloy for unmatched strength.
• Bore Sizes: Customizable options for overbore requirements.

JE Pistons 13.0:1 High-Compression Piston Kit - BMW S14B23 (Set of 4)

Unleash the full potential of your BMW S14B23 engine with the JE Pistons 13.0:1 Compression Piston Kit. Specifically designed for naturally aspirated applications, this high-compression setup boosts power, responsiveness, and efficiency, making it the ideal choice for race-focused builds or high-performance street engines. Built using JE Pistons' cutting-edge forging process, these pistons deliver unmatched strength and precision for your BMW engine.

Key Highlights:

• 13.0:1 Compression Ratio: Optimized for maximum horsepower and torque in naturally aspirated engines, this high-compression setup elevates performance and throttle response, perfect for high-RPM environments.
• Premium Forged Design: Manufactured from 2618 forged aluminum, these pistons are engineered for extreme durability and lightweight performance. Capable of withstanding high stress and temperatures, they offer reliability even under intense racing conditions.
• Superior Combustion Efficiency: The piston dome is designed to optimize combustion chamber dynamics, promoting a clean burn and reducing the chance of detonation, while enhancing power output.
• Friction-Reducing Coating: Skirt coating minimizes friction and wear, providing smoother operation and extending the lifespan of both the pistons and the engine.
• Complete Set: Comes with four pistons, high-performance rings, wrist pins, and locks for a full installation package, making it easy to upgrade your engine with a single purchase.

Performance-Oriented Engineering:

Built to meet the demands of professional racers and performance enthusiasts, JE Pistons are trusted for their superior craftsmanship and strength. With a 13.0:1 compression ratio, this piston kit is the perfect solution for those looking to maximize power in naturally aspirated BMW S14B23 engines.

Application:

• Fits BMW S14B23 Engines (E30 M3 models, race cars, and high-performance builds)
• Ideal for naturally aspirated setups focusing on high RPM and peak power output.

Specifications:

• Compression Ratio: 13.0:1, optimized for high-performance NA builds.
• Material: Forged 2618 aluminum alloy for durability and strength.
• Bore Size: Available in various sizes, including overbore options.

JE Pistons BMW S14B20 13.0:1 Compression Piston Kit - Set of 4

Unlock your BMW S14B20 engine’s true potential with the JE Pistons 13.0:1 High-Compression Piston Kit. Specifically engineered for naturally aspirated performance, these pistons are designed to deliver higher power output, sharper throttle response, and greater engine efficiency, making them perfect for track-focused builds or high-revving street machines. Built from high-strength, lightweight forged aluminum, these pistons offer the durability and precision needed to withstand the extreme demands of motorsport applications.

Key Benefits:

• 13.0:1 Compression Ratio: Elevate engine performance with a higher compression ratio that optimizes cylinder pressure for maximum power, torque, and acceleration in naturally aspirated setups.
• Forged for Strength and Lightness: Constructed from 2618 forged aluminum alloy, these pistons provide the ideal balance of strength and weight, ensuring maximum durability without sacrificing engine speed.
• Efficient Combustion Design: Piston crown engineered to enhance combustion chamber dynamics, promoting cleaner, more efficient fuel burn while preventing detonation at high RPMs.
• Low-Friction Skirt Coating: Coated piston skirts reduce friction during operation, extending the life of your pistons and improving overall engine performance.
• Complete Installation Package: Includes four forged pistons, rings, wrist pins, and locks—everything you need to take your S14B20 engine to the next level.

Performance & Precision:

With JE Pistons, you get race-proven reliability and cutting-edge engineering. The 13.0:1 compression ratio boosts performance without compromising on durability, ensuring your BMW S14B20 engine delivers consistent, high-level power in any driving situation.

Application:

• Fits BMW S14B20 Engines (perfect for high-performance street or track builds).
• Ideal for naturally aspirated setups focused on maximizing power and efficiency.

Technical Specs:

• Compression Ratio: 13.0:1, optimized for naturally aspirated engines.
• Material: Forged 2618 aluminum for superior strength and heat resistance.
• Bore Sizes: Custom bore sizes available, including overbore options.

JE Pistons 13:1 Compression Piston Kit - BMW S14B32 Engine

Looking to push your BMW S14B32 engine to its peak performance? The JE Pistons 13:1 Compression Kit is engineered for high-revving, naturally aspirated engines, delivering the kind of power and precision that serious tuners demand. Built with JE Pistons' advanced forging technology, this kit ensures maximum strength without added weight—giving you both performance and reliability under extreme conditions.

Features:

• 13:1 Compression Ratio: This high-compression setup optimizes cylinder pressure, resulting in more power, better torque, and improved throttle response.
• Forged for Strength: Made from 2618 aluminum, these pistons are forged to provide superior strength and thermal efficiency, ideal for engines that operate at high RPMs or under significant load.
• Precision Engineered: Designed specifically for the BMW S14B32 engine, ensuring a seamless fit and optimized combustion chamber dynamics for a perfect blend of power and reliability.
• Reduced Friction: Low-friction skirt coating to reduce wear and maximize engine life, even under the harshest racing conditions.
• Complete Kit: Includes four pistons, premium rings, wrist pins, and locks for a full installation package.