BMW Engine Parts for BMW 3 Series E30 (1984-1991)

Oil Distribution/Sending Block Adapter - Allows For An Oil Pressure/t...

T#:1120864

Part#: 100.11.530.0003

Back Ordered

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

Upgrade your BMW's oil pressure sensor setup with the Oil Distribution/Sending Block. This versatile block is designed to mount in the stock oil pressure sensor location on the oil filter housing or in the original location on the engine block. It allows the use of up to two aftermarket sending units (not included) along with the factory sensor, providing accurate pressure and temperature measurements. Engineered for reliability and cleanliness, it ensures a reliable setup for your BMW's oil pressure monitoring needs.

Mounts in stock oil pressure sensor location for easy installation
Allows use of up to two aftermarket sending units in addition to the factory sensor
Incorporates factory sending unit for utilizing the factory oil pressure light
Threaded for one M12x1.5 port and two 1/8th NPT ports for versatility
Includes banjo bolt and crush washers for secure installation
Compatible with various BMW engines including M20, M42, M50, M52, M54, N52, N54, S50, S52, S54, S65, M10, S14, and M30

Show More Show Less

E30 Group A/DTM Race Style Oil Cooler - BMW E30 M3 325

See fitment notes in the description!

2X Entries For Our G87 M2 Sweepstakes!

T#:8076771

Part#: 8218

In Stock

$ 509.00 USD

Add to Wish List

Qty

$ 509.00 USD

Add to Wish List

Designing the ultimate BMW E30 Oil Cooler was not an easy task. While with custom fabrication anything is possible, CSF prides itself on making upgraded products that fit like a factory unit. Fortunately, BMW already did some of the leg work for this in the late 1980s. The new CSF #8218 is based on the race-proven and championship-winning formula used by BMW. To give you some history on this topic, we have to go back to 1987. After BMW decided to enter Touring Car and DTM racing, they created what most would consider to be the ultimate E30 M3. In the span of about 5 years, the Group A spec M3 became the most successful touring car of all time. This race-spec BMW won two champion’s titles in the European Touring Car Championship and German Touring Car Championship (aka DTM) and countless other victories. The BMW Engineers had to design an oil cooler that could keep up with the added power of the race-spec engine and perform under the grueling conditions on the track. The size of the standard factory oil cooler was increased by about 50% while using the same mounts and connectors as the standard production M3. The CSF E30 Group A / DTM Race Style Oil Cooler is the same size as these race coolers with some modern upgrades/updates. While your original system may still be functional, it is likely not in the best shape. Dented, clogged, and weathered coolers just can’t perform like a new cooler. Even then, the old tube and fin design don’t compare to the durability and performance of a bar and plate design. CSF understands that most owners don’t want to change the look of their Bavarian classics at this point. That’s why the E30 Group A / DTM Oil Cooler was design to fit in the factory location with no custom mounting hardware necessary. The CSF Oil Cooler offers superior cooling capacity, modern technology, and costs less than a genuine OE replacement. When designing this new cooler, CSF wanted to ensure the best possible performance while ensuring the cooler was as durable as possible. As you’ve seen, oil coolers and other heat exchangers can take quite a beating over time. CSF utilizes an extremely rugged and durable Bar/Plate design that can stand up to far more abuse. The CSF “Aero-Flow” Bar design reduces weight compared to other Bar/Plate designs while maintaining maximum strength and air flow. These “Aero-Flow” bars improve heat dissipation with high-density turbulated multi-louvered fins. Turbulation increases the turbulent flow through a tube, effectively increasing heat exchange rates and abilities. At around 50% larger in size, the CSF #8218 Oil Cooler increases both fluid capacity and core surface area. The overall performance of the Oil Cooler far exceeds the factory cooler’s limits. 100% All-Aluminum construction ensures the best performance and durability. In addition, the black powder coat finish provides extra protection and offers an OEM look behind the grille of your E30. Features & Specifications: Group A / DTM E30 M3 Oil Cooler Design Direct fit oil cooler for BMW E30 M3 Can fit all E30 Chassis (see applications and fitment notes) High Efficiency & Rugged Durability Bar/Plate Design “Aero-Flow” Bar Lightweight Construction for Strength and Maximum Flow Cast End Tanks with 100% Tig Welded Construction Satin Black Finish for Extreme Protection Against Corrosion and Debris Comes complete with fitting kit for both OEM style as well as -10 AN male connections Fitment Notes: 1986-1993 BMW E30 M3 (S14) The long factory oil hard line will not be able to use support brackets on the back of the radiator. This is due to the adapter fittings pushing the lines out about a ½” from factory so the brackets won’t line up but the lines will still run to the proper location and can be connected. 1985-1987 (up to 09/87) BMW E30 325 w/ Factory Oil Cooler Requires custom lines (factory hard line passes over the oil cooler normally but this unit is too tall to run that line over the top). 1988-1993 BMW E30 325 w/ Factory Oil Cooler Requires custom lines & mounting hardware. E30 Chassis has provisions for OEM mounting hardware. OEM Mounting Hardware part number listed below. 1984-1993 BMW E30 3-Series w/o Factory Oil Cooler Requires lines, mounting hardware, and sandwich plate (or provision for oil hook up). E30 Chassis has provisions for OEM mounting hardware. OEM Mounting Hardware part numbers listed below. The BMW OEM Parts Required for Retrofit: Body bracket: #17211719126 x 2 Rubber grommet: #17211712839 x 2 Grommet insert: #17211712844 x 2 Grommet hex head screw: #07119916886 x 2 Oil cooler O-rings: #17222245358 x 2

Show More Show Less

Universal Valve Spring Compressor

T#:1809130

Part#: W89409

In Stock at Vendor

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

For servicing overhead valve engine with cylinder head removed.

Piston Ring Comp 3-1/2" to 7"

T#:2242223

Part#: W80573

Ships in 1 Business Day

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

3/8" Dr. 5/8" Extended Spark Plug Socket

T#:2242226

Part#: W80533

Ships in 1 Business Day

$ 20.25 USD

Add to Wish List

Qty

$ 20.25 USD

Add to Wish List

Extended socket length reaches confined areas.

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

CSF High Performance Oil Cooler with OE and AN-10 Fittings - E30 BMW ...

2X Entries For Our G87 M2 Sweepstakes!

T#:401256

Part#: 8092

Ships in 2 Business Days

$ 359.00 USD

Add to Wish List

Qty

$ 359.00 USD

Add to Wish List

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the E30 platform to an external oil cooler. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 4 cooling cores and fits behind the bumper without any issues.

Fits the following BMWs:
1984-1991 E30 BMW M20 Engine

Show More Show Less

Piston Ring Comp 2-1/8" to 5"

T#:2242222

Part#: W80572

Ships in 1 Business Day

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

Spark Plug Gap Gauge

T#:1855998

Part#: W80535

Ships in 2 Business Days

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Easy to read markings to set gaps quickly and easily.

419 Piece Metric O-Ring Assortment Kit

T#:641935

Part#: WLMW5203

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Many uses around the garage and home

6pc Hook & Pick Set

T#:1855974

Part#: W942

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Includes straight, angled and combination picks

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less