BMW Interior Parts for BMW 3 Series E30 (1984-1991)

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For M3 Models From 09/87+ Only

For Vehicles Produced From 09/87+ Only

T#:32350825

Part#: E30M3LATE

Back Ordered

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For M3 Models Up To 09/87 Only

For Vehicles Produced Up To 09/87 Only

T#:32317688

Part#: E30M3EARLY

Ships in 4 Business Days

Starting at $ 1,883.00 USD

Add to Wish List

Starting at $ 1,883.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

For Vehicles Produced From 09/87+ Only

T#:32350866

Part#: E3024VLATE

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...

For Vehicles Produced Up To 09/87 Only

T#:32350849

Part#: E3024VEARLY

Ships in 3 Business Days

Starting at $ 1,844.00 USD

Add to Wish List

Starting at $ 1,844.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Mid Model

For 325e/i Models From 09/87 Up To 08/89 Only

For Vehicles Produced From 09/87 Up To 08/89 Only

T#:32317675

Part#: E30325MID

Ships in 3 Business Days

Starting at $ 1,756.00 USD

Add to Wish List

Starting at $ 1,756.00 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model

For 325e/i Models From 09/89+

For Vehicles Produced From 09/89+

T#:29666101

Part#: 30-325-LATE-AC

Ships in 3 Business Days

Starting at $ 1,709.99 USD

Add to Wish List

Starting at $ 1,709.99 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.

Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Early Model

For 325e/i Models Up To 09/87 Only

For Vehicles Produced Up To 09/87 Only

T#:29666099

Part#: 30-325-EARLY-AC

Ships in 6 Business Days

Starting at $ 1,709.35 USD

Add to Wish List

Starting at $ 1,709.35 USD

Add to Wish List

Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.

Show More Show Less

A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...

For E30 models with a 24v Engine Swap Only (S50, S52, S54, M50, M52, and M54)

T#:32284525

Part#: ACS3024VABMFKIT1

Ships in 3 Business Days

$ 663.00 USD

Add to Wish List

Qty

$ 663.00 USD

Add to Wish List

Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

For use with a Sanden 508 (SD5H14) Compressor and A/C Solutions Sanden Compressor Brack...

T#:32284522

Part#: ACS-30-1014-AB-S

Ships in 3 Business Days

$ 385.99 USD

Add to Wish List

Qty

$ 385.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

CSF E30 Parallel Flow Condenser + 13" SPAL Fan Combo

T#:29500098

Part#: ACS-30-CSF-SPAL-

Ships in 7 Business Days

$ 378.99 USD

Add to Wish List

Qty

$ 378.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)

Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set

For use with a Sanden 508 (SD5H14) Compressor and A/C Solutions Sanden Compressor Brack...

T#:29466768

Part#: ACS-30-AB-SET

Ships in 3 Business Days

$ 375.99 USD

Add to Wish List

Qty

$ 375.99 USD

Add to Wish List

Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212

Show More Show Less

A/C Solutions BMW S14 M10 Sanden Compressor Bracket

T#:32118912

Part#: ACS-1014-KIT

Ships in 3 Business Days

$ 325.99 USD

Add to Wish List

Qty

$ 325.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the S14 and M10 engine block using a fully isolated (bushed) design similar to that of the factory E30 M3 assembly. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and zinc-plated to withstand the toughest conditions without sacrificing the OEM look and feel. Overall package weight (including compressor) comes in at 17lbs (less than the original E30 M3 assembly) and boasts a tighter center of gravity for less stress on the isolator bushings. What’s included? A/C Solutions S14/M10 Sanden compressor bracket Yellow zinc 8.8 and 10.9 hardware Compressor ground wire Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. A larger V-belt will be required (Gates 13x875mm). For use with the following models: BMW E30 (318i, 320is, M3) PATENT PENDING Cross-reference part numbers: 64521268536, 64521277002, 64521706826, 07119932095, 07119904115, 07119901161, 07119905549, 07119932112, 07119932122, 07119904463, 07119900581, 07119902912, 07119913664, 64521268537, 64521268538, 32411705063, 07119900052, 07119907030, 07129946400, 07129905767, 64521278034, 07119912712, 07129964672, 64521278036, 64521276354, 07119901120, 07119903039

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (standard)

For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application

T#:29466797

Part#: SD5H14-6668

Ships in 8 Business Days

$ 325.00 USD

Add to Wish List

Qty

$ 325.00 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.

Show More Show Less

Uro Heater Control Valve - E30

2X Entries Into Our F80 M3 Sweepstakes

T#:6795786

Part#: 64111386707

Ships in 1 Business Day

$ 297.99 USD

Add to Wish List

Qty

$ 297.99 USD

Add to Wish List

Not getting heat to the cabin of the car or not able to turn off the heat? The heater control valve may be the culprit. On the E30 3 series BMW produced 2 different types of heater core / heater valve. One type had aluminum inlet pipes (64118391363) and the other had plastic inlets (64118391362). It is a good idea to inspect the heater core while replacing the heater valve. You will have to check your car to ensure that you are ordering the correct part. Please check the photo of this item. This item fits the following BMWs: 1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3

Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)

For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application

T#:29466793

Part#: SD5H14-6630

Ships in 3 Business Days

$ 285.99 USD

Add to Wish List

Qty

$ 285.99 USD

Add to Wish List

Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)

Show More Show Less

CSF E30 Parallel Flow Condenser

T#:29500095

Part#: ACS-30-CSF-KIT

Ships in 3 Business Days

$ 259.99 USD

Add to Wish List

Qty

$ 259.99 USD

Add to Wish List

Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser is used to replace your factory tube and fin condenser and is built to work with a SPAL 13" pusher fan (sold separately). This upgrade will result in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. What’s included? CSF parallel flow condenser (cross ref # 64538391509) Mounting hardware

Show More Show Less

A/C Solutions BMW E30 LHD Interior Lines

T#:29300814

Part#: ACS-30-INT-SET

Ships in 7 Business Days

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line

Show More Show Less

A/C Solutions E30 24v Swap Denso Compressor Manifold

T#:32284524

Part#: ACS-24V

Ships in 3 Business Days

$ 230.99 USD

Add to Wish List

Qty

$ 230.99 USD

Add to Wish List

Designed for the E36 M3 Denso Compressor, our 24v manifold allows you to run our E30 24v Swap Line Set and retain A/C in your S5x or M5x powered E30. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso Compressor (Denso 471-1114 or 471-1115) and the A/C Solutions E30 24v Swap Lines. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all) PATENT PENDING

Show More Show Less

A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...

Models Produced Before 1985 Will Require Bracket 64521717007

T#:29466786

Part#: ACS-203038-KIT

Ships in 8 Business Days

$ 225.99 USD

Add to Wish List

Qty

$ 225.99 USD

Add to Wish List

Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING

Show More Show Less

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Early M...

For vehicles with a production date up to 09/1987

T#:32118922

Part#: A301014CEARLYSET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the early model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (320is, M3) Cross reference part numbers: 64539067578, 64531386565

Show More Show Less

A/C Solutions BMW E30 M3 High-Pressure Condenser Return Line (Late Mo...

For vehicles with a production date from 09/1987+

T#:32118921

Part#: AC301014CLATESET

Ships in 3 Business Days

$ 154.00 USD

Add to Wish List

Qty

$ 154.00 USD

Add to Wish List

Designed specifically for the late model E30 M3, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (320is, M3) Cross-reference part numbers: 64539067578, 64531386565

Show More Show Less

Blower Motor

2X Entries Into Our F80 M3 Sweepstakes

T#:585017

Part#: 64111370930

Ships in 1 Business Day

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

Keep the air in your vehicle circulating

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...

For vehicles with a production date from 09/1987+

T#:29300810

Part#: ACS-30-C-LATE-SE

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552

Show More Show Less

A/C Solutions BMW E30 High-Pressure Condenser Return Line - Early Mod...

For vehicles with a production date up to 09/1987

T#:29300811

Part#: ACS-30-C-EARLY-S

Ships in 3 Business Days

$ 125.99 USD

Add to Wish List

Qty

$ 125.99 USD

Add to Wish List

Designed specifically for the early model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (< 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64539067572, 64531377857, 64531372608

Show More Show Less

A/C Solutions BMW E30 R134a Retrofit Kit (82319067394)

T#:29466776

Part#: ACS-30-RETROFIT-

Ships in 7 Business Days

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label

Show More Show Less

URO Manual Transmission Shift Knob - BMW E3X 3

2X Entries Into Our F80 M3 Sweepstakes

T#:49822528

Part#: 25117500299

Ships in 1 Business Day

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Is your shift knob broken or worn? Replace it with this option from URO!

URO Ignition Switch - BMW E30 3-Series (09/83+)

For vehicles with a production date from 09/1983+

2X Entries Into Our F80 M3 Sweepstakes

T#:43750234

Part#: 61321374967

In Stock

$ 86.24 USD

Add to Wish List

Qty

$ 86.24 USD

Add to Wish List

Restore your ignition system with this brand new ignition switch from URO. Located in the steering column, this switch can fail, preventing your BMW from being able to be started properly.

A/C Solutions BMW E30 Bracket And Hardware Kit

T#:29466771

Part#: ACS-30-ABCD-KIT

Ships in 5 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496

Show More Show Less

BMW R134a High-Pressure Cut Off Switch (Green)

For Vehicles with Production Date Up To 09/1989

T#:29666089

Part#: ACS-R134ASWITCHG

Ships in 3 Business Days

$ 52.99 USD

Add to Wish List

Qty

$ 52.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307

Show More Show Less

BMW R134a Safety Pressure Switch (Black)

For Vehicles with Production Date From 09/1989+

T#:32118918

Part#: ACS-R134ASWITCHB

Back Ordered

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a safety high/low-pressure cut off switch Fitment notes: This switch is compatible with the late model E30 filter drier. For use with the following models: BMW E30 (all) Cross reference part numbers: 64538390971, 64531386813, SW11509C, 1711418, 36571

Show More Show Less

URO Air Conditioning Pressure Switch

2X Entries Into Our F80 M3 Sweepstakes

T#:37757227

Part#: 64538390971

Ships in 1 Business Day

$ 40.99 USD

Add to Wish List

Qty

$ 40.99 USD

Add to Wish List

Is your air conditioning system randomly turning on and off, leaving you sweating on hot summer days? The pressure switch regulates the A/C compressor by shutting it off if refrigerant pressure is too high or too low, protecting vital system components. A faulty pressure switch can cause the compressor to shut off unpredictably or fail to turn on at all, preventing your A/C from cooling the cabin. If you're experiencing these issues, replacing the pressure switch can restore cool, consistent airflow.

Show More Show Less

BMW E30 R134a Filter Drier (Early Model)

For Vehicles Built Pre 09/1989

T#:29500118

Part#: ACS-30-E-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the early high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For late-model applications, see ACS-30-L-FD For use with the following models (< 09/89): BMW E30 (all)

Show More Show Less

BMW E30 R134a Expansion Valve

T#:29666091

Part#: ACS-30-XV

Ships in 7 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)

Show More Show Less

BMW E30 R134a Filter Drier (Late Model)

For Vehicles Built Post 09/1989

T#:29500124

Part#: ACS-30-L-FD

Ships in 3 Business Days

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)

Show More Show Less

URO Receiver Drier - BMW E30

2X Entries Into Our F80 M3 Sweepstakes

T#:372998

Part#: 64531377412

Ships in 1 Business Day

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Replace whenever the A/C system is opened. Features 3-ear mounting.

URO Receiver Drier - BMW E30

The URO Receiver Drier - BMW E30 ensures optimal air conditioning performance by effectively removing moisture from the refrigerant. Designed to maintain a dry and contaminant-free A/C system, this receiver drier prevents system inefficiencies caused by excess moisture. The internal desiccant bag absorbs any moisture present, but prolonged exposure to open air can render it ineffective. Replacing the receiver drier is essential for keeping your A/C system running efficiently and maintaining a comfortable cabin temperature.

Direct replacement for BMW E30 models
Removes moisture and contaminants from the refrigerant
Prevents A/C system inefficiencies and corrosion
Essential for maintaining

Show More Show Less

A/C Expansion Valve - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:55821693

Part#: 1268300284

Back Ordered

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

AC Compressor Bushing - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:2073444

Part#: 64521278034

Ships in 1 Business Day

$ 22.26 USD

Add to Wish List

Qty

$ 22.26 USD

Add to Wish List

Reduces noise and vibrations from the A/C compressor.

BMW E36 Front Left Door Handle

2X Entries Into Our F80 M3 Sweepstakes

T#:375302

Part#: 51211926305

In Stock

$ 16.08 USD

Add to Wish List

Qty

$ 16.08 USD

Add to Wish List

BMW E36 Front Left Door Handle

The BMW E36 Front Left Door Handle by URO Parts is a complete inner handle assembly, designed to be a direct replacement for your vehicle. URO Parts is recognized as a leading manufacturer of high-quality aftermarket components, ensuring that their products meet ISO 9000 certification standards for long-lasting performance. This handle assembly is crafted to fit perfectly with your BMW E36, providing the durability and reliability you need.

Benefits:

Direct replacement for the front left door handle on BMW E36
Manufactured to ISO 9000 standards for quality assurance
Durable construction for long-lasting use
Ensures a perfect fit and easy installation
Backed by URO Parts' reputation for high-quality aftermarket components

Show More Show Less

R12 To R134a Low And High-Pressure Service Port Adapter Fittings ...

T#:29666088

Part#: ACS-R134A-ADAPTE

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

Designed for use on the E24, E28, and E30, these R134a adapters are used to fit over your original R12 low-pressure and high-pressure ports to charge the system with R134a. What’s included? R134a low and high-pressure service fittings Fitment notes: Low profile design allows for clearance around BMW E30 hood support. For use with the following models: BMW E23, E24, E28, E30

Show More Show Less

Denso Compressor Manifold R134a O-Ring

T#:32284523

Part#: 471-O-RING

Ships in 3 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

New HNBR manifold gasket designed for the E36 M3 Denso Compressor and/or our 24v Swap Denso Compressor Manifold to ensure your A/C system is properly sealed. This can be used with both R12 and R134a and meets or exceeds factory specifications. What’s included? Denso manifold o-ring Cross-reference part numbers: MT9519, 24156, 19188305, 88918403, 1531721, 471

Show More Show Less

BMW Interior Door Handle Trim

2X Entries Into Our F80 M3 Sweepstakes

T#:377272

Part#: 51211876043

In Stock

$ 9.19 USD

Add to Wish List

Qty

$ 9.19 USD

Add to Wish List

Can be used on both the front & rear doors.

A/C Solutions R134a Retrofit Label

T#:29466781

Part#: ACS-RETROFIT-LAB

Ships in 3 Business Days

$ 6.95 USD

Add to Wish List

Qty

$ 6.95 USD

Add to Wish List

Designed to mimic the factory BMW and Porsche design language, this engine bay label is used to document the amount and date of R134a added to the system after completing any A/C repair. This sticker is designed for high temp engine bay applications and should be placed in a visible spot for future service technicians to reference. Made in the USA. What’s included? A/C Solutions R134a retrofit label (3.75" wide) Cross reference part numbers: 64508363254

Show More Show Less

A/C Solutions BMW E30 E28 E24 R134a O-Ring Kit

T#:29466775

Part#: ACS-O-RING-KIT

Ships in 3 Business Days

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

For use on the factory Bosch R12 system or our upgraded Sanden R134a conversions, this kit provides the o-rings needed to convert your A/C system to the modern HNBR R134a standard. This is cross compatible with all versions of the E30, E28, E24, and E23, and may include additional o-rings as a result. What’s included? 2x #12 R134a o-rings 4x #10 R134a o-rings 6x #8 R134a o-rings 5x #6 R134a o-rings Fitment notes: For use with the following models: BMW E23, E24, E28, E30, E32 Cross-reference part numbers: 64508390602, 64508390601, 64508390603, 64508390604, 64508390605, 64531350491

Show More Show Less

Ball Cup Bushing - Lower

2X Entries Into Our F80 M3 Sweepstakes

T#:397576

Part#: 25111207744

In Stock

$ 5.99 USD

Add to Wish List

Qty

$ 5.99 USD

Add to Wish List

component for manual transmissions.

Turn Signal Relay

2X Entries Into Our F80 M3 Sweepstakes

T#:37757222

Part#: 1H0953227

In Stock

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

URO Seat Belt Buckle Retaining Button Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:2073449

Part#: 72111917406K

In Stock

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

URO Seat Belt Buckle Retaining Button Kit

The URO Seat Belt Buckle Retaining Button Kit is an essential replacement part for ensuring your seat belt buckle stays securely in place and easily accessible. This kit is designed to fit various BMW models, providing the front half of the button that keeps your seat belt buckle from sliding out of reach. Over time, the original button may wear out or become damaged, making it difficult to access the seat belt. With this URO replacement, you can restore full functionality to your seat belt system, ensuring safety and convenience.

Designed to fit a variety of BMW models
Keeps the seat belt buckle securely in place
Ensures the seat belt is easily accessible when needed
A direct replacement for damaged or missing buckle retaining buttons
High-quality materials for durability and long-lasting performance
Easy installation to restore the seat belt's full functionality

Show More Show Less

URO Door Lock Knob - E23 E28 E30 E32 E34

Front Right Rear Right Front Left

2X Entries Into Our F80 M3 Sweepstakes

T#:592561

Part#: 51211852140

Ships in 1 Business Day

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts.

Show More Show Less

A/C Solutions Box Sticker

T#:29466780

Part#: ACS-BOX-STICKER

Ships in 3 Business Days

$ 2.75 USD

Add to Wish List

Qty

$ 2.75 USD

Add to Wish List

The original A/C Solutions box sticker - perfect for your corner window, tool chest, laptop, desk, and more. Made in the USA. What’s included? A/C Solutions box sticker (4" wide)

URO Throttle Cable Bushing - E23, E24, E28, E30, E34, E36, E38, E39 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:579530

Part#: 35411152331U

In Stock

$ 2.19 USD

Add to Wish List

Qty

$ 2.19 USD

Add to Wish List

Connects the throttle cable to the pedal lever

URO Door Lock Knob - Black - BMW E30 E36 E70 E84 E90 E91 E82 E88 Z3 Z...

2X Entries Into Our F80 M3 Sweepstakes

T#:639565

Part#: 51211805643

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Also called a "lock button" by BMW, this plastic door lock knob sits at the top of your door lock operating rod, protruding through the door card. If yours is missing or broken, this replacement from URO is the perfect low-cost replacement

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Interior Parts for BMW 3 Series E30 (1984-1991)

Sub-Categories

URO Receiver Drier - BMW E30

BMW E36 Front Left Door Handle

Benefits:

URO Seat Belt Buckle Retaining Button Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results