BMW Interior Parts for BMW 3 Series E30 (1984-1991)

Clear BMW chassis

Please ensure your correct model is selected

The interior of your BMW is where you will hopefully spend most of your time, so it should be ergonomic, comfortable, and safe. All interior components, from OEM replacement switches, trim, or steering wheels, to aftermarket upgrades like racing wheels, safety equipment, and racing seats, are available at Turner Motorsport.

Sub-Categories

Sort By:

A/C Solutions - Corporate Logo
T#:29466776
Part#: ACS-30-RETROFIT-
Ships in 3 Business Days
$ 108.99 USD
Free Shipping on orders $49 and up
Designed for all E30 models, this retrofit kit is designed to convert your factory A/C system to R134a and is cross-compatible to the OEM BMW retrofit kit provided in the late 1990s. What's the difference between this and the full kit? Unlike our full A/C Solutions BMW E30 Conversion Kit, this product only provides the bare minimum components needed to refresh your factory system. This is a great solution for the 318i/is (M42) which uses the Denso compressor; however, for M20-based E30s that use the Bosch compressor, we highly recommend using our full conversion kit that contains a Sanden compressor, parallel flow condenser, and R134a specific expansion valve. What’s in the box? OE R134a filter drier Safety high/low-pressure cut off switch R134a low and high-pressure service fittings E30 R134a o-ring kit R134a retrofit label
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
For 325e/i Models Up To 09/87 Only
For Vehicles Produced Up To 09/87 Only
A/C Solutions - Corporate Logo
T#:29666099
Part#: 30-325-EARLY-AC
Ships in 6 Business Days
Starting at $ 1,709.35 USD
Starting at $ 1,709.35 USD
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions - Corporate Logo
T#:29300814
Part#: ACS-30-INT-SET
Ships in 3 Business Days
$ 249.99 USD
Free Shipping on orders $49 and up
Designed specifically for the E30, this line set is a direct replacement of your original interior lines allowing you to properly run R134a. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. Note: These are only compatible with LHD E30s What’s included? Low-pressure interior suction line (cross ref # 64538391048) High-pressure interior discharge line (cross ref # 64538391047) 3x #10 R134a o-ring(s) 1x #8 R134a o-ring(s) 2x #6 R134a o-ring(s) Cork tape for the low-pressure suction line
Show More Show Less

A/C Solutions - Corporate Logo
T#:29466771
Part#: ACS-30-ABCD-KIT
Ships in 6 Business Days
$ 79.99 USD
Free Shipping on orders $49 and up
For use on all E30 models, this hardware kit is designed to provide the necessary brackets, bolts, body mounts, and hose clamps to support the A/C lines and filter drier for an OEM-like installation. This is a great kit if you're looking to install our Sanden Conversion Kit into a non-A/C equipped E30 or undergoing light restoration and want to refresh your engine bay. What’s in the box? A/C Solutions hose bracket holder (low-pressure line) (#1) Body spacer (high-pressure line) (#2) Hose clamp (large) (#3) Hose clamp (mid) (2x) (#4) Hose clamp (small) (2x) (#5) ST 10mm trim screw (long) (#6) ST 10mm trim screw (mid) (2x)(#7) ST 10mm trim screw (short) (3x) (#8) Expanding body nut (5x) (#9) M6 lock nut (#10) M6 lock washer (#11) M6 washer (#12) 10mm body speed clip (#13) Fitment notes: Our low-pressure suction lines may differ slightly from your original part and are designed to use the medium size hose clamps for #4 in the diagram. For use with the following models: BMW E30 Cross reference part numbers: 64121379221, 12141305028, 12427840406, 64501380494, 07119916970, 64501380494, 64501372610, 16111152613, 07119916965, 07129922705, 64531372613, 07119931044, 07119933082, 17111150170, 645313057128, 64501380496
Show More Show Less

A/C Solutions - Corporate Logo
T#:29666091
Part#: ACS-30-XV
Ships in 3 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Specific to the E30, this R134a expansion valve is designed to replace your original R12 expansion valve and is a highly recommended replacement component during any R134a retrofit. What’s included? R134a expansion valve Fitment notes: For use with the following models: BMW E30 (all)
Show More Show Less
A/C Solutions BMW M20 M30 S38 Sanden Compressor Bracket (E30, E28, E2...
Models Produced Before 1985 Will Require Bracket 64521717007
A/C Solutions - Corporate Logo
T#:29466786
Part#: ACS-203038-KIT
Ships in 3 Business Days
$ 225.99 USD
Free Shipping on orders $49 and up
$ 225.99 USD
Free Shipping on orders $49 and up
Designed with originality in mind, this kit is used to fit the Sanden 508 or 709 Compressor (SD5H14) (SD7H15) to the M20, M21, M30, M90, S38, or M88 engine using the factory engine accessory mount. Professionally engineered, designed, and manufactured in California, this has been fully FEA tested and yellow zinc plated to withstand the toughest conditions without sacrificing the OEM look and feel. What’s included? A/C Solutions Sanden compressor bracket Yellow zinc 10.9 hardware Fitment notes: This is designed for custom applications and will require modification of your existing A/C lines to fit the Sanden compressor. For complete plug-and-play kits, see here. A larger V-belt will be required Use Gates 13x875mm for the BMW E30, E28, and E24 (M30B34). Use Gates 13x925mm for the BMW E24 (M30B35) Early model cars (typically pre-1985) will need the later engine accessory mount: 64521717007 (M20); 64521284953 (M30/S38). For use with the following models: BMW E30 (325e/es, 325i/is, 325ix) BMW E28 (524td, 528e, 533i, 535i/is, M5) BMW E24 (633CSi, 635CSi, M635CSi, M6) BMW E23 (732i, 735i, 745i) PATENT PENDING
Show More Show Less

A/C Solutions BMW E30 Complete Conversion Kit - Late Model
For 325e/i Models From 09/89+
For Vehicles Produced From 09/89+
A/C Solutions - Corporate Logo
T#:29666101
Part#: 30-325-LATE-AC
Ships in 5 Business Days
Starting at $ 1,709.99 USD
Starting at $ 1,709.99 USD
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which model/year should I choose? Use the mfg. date on the driver's door of your E30 as well as our supplemental user guide to select the appropriate combination for your car. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc.
Show More Show Less
OMP - Corporate Logo
T#:393626
Part#: OD/1958
In Stock
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

BMW E30 R134a Filter Drier (Early Model)
For Vehicles Built Pre 09/1989
A/C Solutions - Corporate Logo
T#:29500118
Part#: ACS-30-E-FD
Ships in 3 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the early high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For late-model applications, see ACS-30-L-FD For use with the following models (< 09/89): BMW E30 (all)
Show More Show Less

Genuine Sanden 508 (SD5H14) Compressor (Rear Exit)
For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application
A/C Solutions - Corporate Logo
T#:29466793
Part#: SD5H14-6630
Ships in 3 Business Days
$ 285.99 USD
Free Shipping on orders $49 and up
$ 285.99 USD
Free Shipping on orders $49 and up
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345)
Show More Show Less
BMW R134a Safety Pressure Switch (Black)
For Vehicles with Production Date From 09/1989+
A/C Solutions - Corporate Logo
T#:32118918
Part#: ACS-R134ASWITCHB
Ships in 3 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
$ 49.99 USD
Free Shipping on orders $49 and up
The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a safety high/low-pressure cut off switch Fitment notes: This switch is compatible with the late model E30 filter drier. For use with the following models: BMW E30 (all) Cross reference part numbers: 64538390971, 64531386813, SW11509C, 1711418, 36571
Show More Show Less
OMP - Corporate Logo
T#:393667
Part#: OD/2023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Classic inspired 3-spoke OMP Mugello wood steering wheel in 350mm diameter. Gloss aluminum center with OMP wooden horn button. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have 3 holes each that increase in size as they get closer to the center of the steering wheel.
Show More Show Less


OMP - Corporate Logo
T#:393794
Part#: HB/699
Ships in 4 Business Days
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping
This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Show More Show Less
OMP - Corporate Logo
T#:393787
Part#: HB/692
Ships on Aug 6, 2026
$ 65.00 USD
Free Shipping on orders $49 and up
If additional lower back support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Lumbar Cushion. Measuring in at 10" by 5" by 2", it is fastened to the velour fabric of the seat with Velcro strips, it can be adjusted to exactly where you need it. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Show More Show Less
OMP - Corporate Logo
T#:393735
Part#: HC/923
Ships on Aug 17, 2026
$ 139.00 USD
Free Shipping
$ 139.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm

OMP - Corporate Logo
T#:393730
Part#: HC/733E
Ships in 10 Business Days
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Genuine Sanden 508 (SD5H14) Compressor (standard)
For Use With ACS-203038-KIT OR ACS-1014-KIT Only, Or Custom Application
A/C Solutions - Corporate Logo
T#:29466797
Part#: SD5H14-6668
Ships in 3 Business Days
$ 325.00 USD
Free Shipping on orders $49 and up
$ 325.00 USD
Free Shipping on orders $49 and up
Designed to work with our ACS Sanden Compressor Bracket, these new (unused), genuine (green-label) Sanden compressors are direct from Singapore and built for high-stressed applications. The 508 series is a proven design that results in durable, efficient, and near-silent A/C that has been the basis for all of our signature plug-and-play conversion kits. The suction and discharge ports use SAE #10 and #8 fittings, respectively, and the compressor comes pre-filled with PAG oil. Note: A larger v-belt will be required (13x875mm Gates #9345). If you are planning to use this with our E30 Sanden line set, you will need the rear exit Sanden compressor instead.
Show More Show Less
OMP - Corporate Logo
T#:393744
Part#: OD/1981
Ships in 4 Business Days
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

OMP - Corporate Logo
T#:391802
Part#: OD/2012
Ships in 4 Business Days
$ 275.00 USD
Free Shipping
$ 275.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 330mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less
OMP - Corporate Logo
T#:393734
Part#: HC/922
Ships in 5 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm

OMP - Corporate Logo
T#:393737
Part#: HC/925
Ships in 10 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm

OMP - Corporate Logo
T#:391779
Part#: OD/1956
Ships in 10 Business Days
$ 259.00 USD
Free Shipping
$ 259.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Leather steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393721
Part#: HA/741E
Ships in 10 Business Days
$ 475.00 USD
$ 475.00 USD

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less
OMP - Corporate Logo
T#:393718
Part#: HA/790
Ships in 10 Business Days
$ 629.00 USD
$ 629.00 USD

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

*Made to order, extended wait and shipping times may occur.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less


OMP - Corporate Logo
T#:393724
Part#: HA/781E
Ships on Aug 28, 2026
$ 475.00 USD
$ 475.00 USD

This is an OMP performance TRS-E tubular racing seat. The seat internal frame is tubular steel and the entire seat upholstery is velour material. Tubular steel ensures strength and protection and the velour adds to the comfort of the seat. The leg pad is removable for a more individual fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less
OMP - Corporate Logo
T#:393639
Part#: OD/1979/N
Ships on Aug 4, 2026
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip.
Show More Show Less
OMP - Corporate Logo
T#:393727
Part#: HC/665
Ships on Aug 10, 2026
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Sliding rail kit to be mounted between the seat mount and the seat.

OMP - Corporate Logo
T#:393622
Part#: OD/1951
In Stock
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
Rally inspired 2-spoke OMP Rally Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

OMP - Corporate Logo
T#:390208
Part#: HA/772E
In Stock
$ 1,059.00 USD
$ 1,059.00 USD

OMP racing seat with a perforated Fiberglass shell and high protection shoulder and shaped headrest, designed for comfortable driving. Higher side bolsters for lateral leg support. Constructed with fire-resistant Airtex material and velour upholstering.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards

Show More Show Less
BMW R134a High-Pressure Cut Off Switch (Green)
For Vehicles with Production Date Up To 09/1989
A/C Solutions - Corporate Logo
T#:29666089
Part#: ACS-R134ASWITCHG
Ships in 6 Business Days
$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
The high-pressure cut off switch is used to disengage the A/C compressor when the system reaches maximum pressure. Unlike your original switch, this is specifically designed for R134a as the high-pressure side operates at a higher PSI than that of R12. What’s included? R134a high-pressure cut off switch Fitment notes: This switch is compatible with the E28/E24 filter drier and the early model E30 filter drier. For use with the following models: BMW E23, E24, E28, E30 Cross-reference part numbers: 64538363859, 64531386971, ACS0247P, MT0307
Show More Show Less

A/C Solutions - Corporate Logo
T#:29500098
Part#: ACS-30-CSF-SPAL-
Ships in 3 Business Days
$ 378.99 USD
$ 378.99 USD
Designed specifically for the E30 and manufactured by CSF Cooling, this high-performance parallel flow condenser and SPAL fan upgrade will replace your factory condenser and auxiliary fan resulting in superior vent temperatures, less strain on your electrical system, and improved engine cooling performance. Note: In order to properly run any SPAL fan, additional wiring will be required What’s included? CSF parallel flow condenser (cross ref # 64538391509) Genuine SPAL 13" straight blade pusher fan 30A fuse Mounting hardware Detailed installation instructions Fitment notes: Additional wiring will be required For use with the following models: BMW E30 (all)
Show More Show Less
BMW E30 R134a Filter Drier (Late Model)
For Vehicles Built Post 09/1989
A/C Solutions - Corporate Logo
T#:29500124
Part#: ACS-30-L-FD
Ships in 3 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
The filter drier is designed to keep the system clean and clear of debris and moisture and should be changed any time the A/C system is opened for service. This E30 filter drier is designed to use the late model high-pressure switch. What’s included? E30 R134a filter drier Fitment notes: For early model applications, see ACS-30-E-FD For use with the following models (≥ 09/89): BMW E30 (all)
Show More Show Less

A/C Solutions E30 24v Swap Lines And Manifold Kit (S50, S52, S54, And...
For E30 models with a 24v Engine Swap Only (S50, S52, S54, M50, M52, and M54)
A/C Solutions - Corporate Logo
T#:32284525
Part#: ACS3024VABMFKIT1
Ships in 3 Business Days
$ 663.00 USD
$ 663.00 USD
Designed for 24v swapped E30s, this R134a line set and Denso manifold provides you with the bare minimum to retain A/C in your S5x or M5x powered E30 using the E36 M3 Denso compressor. Professionally engineered, designed, and manufactured in California, each component has been fully inspected, tested, and anodized to withstand the toughest conditions without sacrificing the OEM look and feel. This setup is designed to work with the S50, S52, S54, M50, M52, and M54 engines, offering seamless integration and reliable performance. Which model (chassis) should I choose? Select the model (chassis) assigned to your E30 when it left the factory to ensure the proper line routing. Can I reuse my existing Denso compressor? Yes, your original Denso 471-1114 or 471-1115 can be used as long as it's clean. If you are unsure of its condition, do not attempt to reuse it without further inspection. What’s included? A/C Solutions 24v compressor manifold (for Denso 471) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Denso manifold o-ring Fitment notes: This must be used in conjunction with the BMW E36 M3 Denso compressor (Denso 471-1114 or 471-1115). BMW compressor bracket (64551730768) will be required to support the Denso compressor. For use with the following models with the S50, S52, S54, M50, M52, or M54 engine: BMW E30 (all)
Show More Show Less

A/C Solutions BMW E30 Sanden Conversion Line Set
For use with a Sanden 508 (SD5H14) Compressor and A/C Solutions Sanden Compressor Brack...
A/C Solutions - Corporate Logo
T#:29466768
Part#: ACS-30-AB-SET
Ships in 3 Business Days
$ 375.99 USD
Free Shipping on orders $49 and up
$ 375.99 USD
Free Shipping on orders $49 and up
Designed with originality in mind, this R134a A/C line set used to replace your old R12 lines and allow you to run a Sanden compressor in your BMW E30 without sacrificing the OEM look and feel. In addition to these components, please review the fitment notes below. What’s included? Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) Fitment notes: These lines are designed for the Sanden compressor (rear exit) and will require the use of our Sanden compressor bracket. These lines are not compatible with the 325iX or 318i/is. Models fitted with fuel coolers will have to be capped and removed. For use with the following models: BMW E30 (325e/es, 325i/is, 320is, M3) Cross reference part numbers: 64538391048, 64531372603, 64531377821, 64538391051, 64531372606, 16121179238, 19191679, 64531380926, 64531386486, 64531386570, 19191528, 64531377855, 64538391052, 88918212
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Mid Model
For 325e/i Models From 09/87 Up To 08/89 Only
For Vehicles Produced From 09/87 Up To 08/89 Only
A/C Solutions - Corporate Logo
T#:32317675
Part#: E30325MID
Ships in 3 Business Days
Starting at $ 1,756.00 USD
Free Shipping on orders $49 and up
Starting at $ 1,756.00 USD
Free Shipping on orders $49 and up
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 24v Swap Conversion Kit (S50, S52, S54, And Mor...
For Vehicles Produced From 09/87+ Only
For Vehicles Produced From 09/87+ Only
A/C Solutions - Corporate Logo
T#:32350866
Part#: E3024VLATE
Ships in 3 Business Days
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Starting at $ 1,844.00 USD
Free Shipping on orders $49 and up
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play R134a upgrade allowing you to properly run A/C in your 24v swapped E30 without sacrificing the OEM look and feel. Using the E36 M3 Denso compressor and our Denso Compressor Manifold, this has been designed to work with the S50, S52, and S54 as well as the M50, M52, and M54 engine and comes complete with a new Denso compressor, CSF parallel flow condenser and SPAL fan, R134a expansion valve, and new R134a lines (inside and out). NOTE: All variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, and factory interior HVAC box with sensors, control module, thermostat, etc. Note: BMW compressor bracket 64551730768 will be required to support the Denso compressor. What’s in the box? Genuine Denso E36 compressor A/C Solutions 24v Denso compressor manifold CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve R134a high-pressure adapter fitting Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit factory S50, S52, and S54 headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less


A/C Solutions BMW E30 High-Pressure Condenser Return Line - Late Mode...
For vehicles with a production date from 09/1987+
A/C Solutions - Corporate Logo
T#:29300810
Part#: ACS-30-C-LATE-SE
Ships in 3 Business Days
$ 125.99 USD
Free Shipping on orders $49 and up
$ 125.99 USD
Free Shipping on orders $49 and up
Designed specifically for the late model E30, this R134a A/C line is a direct replacement of your original high-pressure condenser to drier return line. While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a. What’s included? High-pressure condenser return line (condenser to drier) 2x #6 R134a o-ring(s) Fitment notes: For use with the following models (≥ 09/87): BMW E30 (318i/is, 325e/es, 325i/is, 325ix) Cross reference part numbers: 64538391041, 64531381741, 61627198552
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Early Model
For M3 Models Up To 09/87 Only
For Vehicles Produced Up To 09/87 Only
A/C Solutions - Corporate Logo
T#:32317688
Part#: E30M3EARLY
Ships in 3 Business Days
Starting at $ 1,883.00 USD
Starting at $ 1,883.00 USD
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less
A/C Solutions BMW E30 Complete Conversion Kit - Late Model
For M3 Models From 09/87+ Only
For Vehicles Produced From 09/87+ Only
A/C Solutions - Corporate Logo
T#:32350825
Part#: E30M3LATE
Ships in 8 Business Days
Starting at $ 1,883.00 USD
Free Shipping on orders $49 and up
Starting at $ 1,883.00 USD
Free Shipping on orders $49 and up
Designed and engineered for the enthusiast, this conversion kit offers a complete, plug-and-play upgrade to the A/C system in the E30 to R134a using a modern Sanden compressor, CSF parallel flow condenser, R134a expansion valve, new R134a lines (inside and out), and all the necessary supporting bracketry. This upgrade will result in colder A/C vent temperatures, less strain on the engine, and a more efficient and durable A/C system. NOTE: For the M3, all variations ship with the late model filter drier and will require this safety switch if not already fitted. Which condenser and fan should I choose? For a complete and proper conversion, we strongly recommend using our new high performance CSF parallel flow condenser and SPAL fan combo for the most efficient A/C system. If you are planning to use your original OEM fan, we recommend using the Nissens condenser. Do I need to replace my interior lines? While your original R12 lines can be used, it's highly recommended to replace all rubber lines when converting to R134a to prevent against leaks. What if my E30 didn't come factory with A/C? Our products are designed to support factory A/C models; however, they can be fitted into non-A/C applications, but you will need to obtain a factory HVAC wiring harness, high-pressure drier return line (long metal return line), evaporator, aluminum engine accessory bracket (to mount our compressor bracket), and factory interior HVAC box with sensors, control module, thermostat, etc. Check out our E30 install video! Note: Models fitted with fuel coolers will have to be capped and removed. Images may not reflect all configurations of this product. This kit is not compatible with the 325iX or 318i/is. What’s in the box? Genuine Sanden SD5H14 (508) compressor A/C Solutions Sanden compressor bracket CSF parallel flow condenser w/ genuine SPAL 13" fan and hardware (optional) Nissens parallel flow condenser (optional) Interior line set (optional) Low-pressure suction line (bulkhead to compressor) High-pressure discharge line (compressor to drier) High-pressure condenser return line (condenser to drier) OE R134a filter drier R134a expansion valve Gates v-belt R134a high-pressure adapter fitting Compressor mounting hardware Model specific R134a o-ring kit R134a retrofit label Wiring kit and misc. hardware Detailed installation instructions This product requires no R&D, and is easily reversible using professionally engineered components, OEM-like hardware, and durable replacement parts resulting in a trouble-free installation that can be completed in 4-6 hours by a professional. It is designed to fit both stock and euro headers while providing ample clearance around the factory oil cooler lines and OEM brake ducting/undertray. This kit assumes your vehicle is stock and still retains all original equipment. Proper functionality of the evaporator, expansion valve, and HVAC sensors is required for a fully functional system.
Show More Show Less

OMP - Corporate Logo
T#:393655
Part#: OD/1987/NN
Ships in 3 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport inspired 3-spoke OMP Velocita Suede steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

OMP - Corporate Logo
T#:393666
Part#: OD/2020
Ships in 4 Business Days
$ 379.00 USD
Free Shipping
$ 379.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Superleggero suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip.
Show More Show Less
OMP - Corporate Logo
T#:393789
Part#: HB/695
Ships in 4 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.
Show More Show Less

OMP - Corporate Logo
T#:391799
Part#: OD-TRECENTO
Ships in 10 Business Days
Starting at $ 239.00 USD
Free Shipping
Starting at $ 239.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and available in leather or suede.
OMP - Corporate Logo
T#:393677
Part#: ODC023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Ultra-light spacer that has been CNC machined and anodized black. Gives 60mm of clearance for the steering wheel.

OMP - Corporate Logo
T#:391797
Part#: OD/1975
Ships in 10 Business Days
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less

OMP - Corporate Logo
T#:15478692
Part#: HA/766E/N
Ships in 6 Business Days
$ 729.00 USD
$ 729.00 USD

Elevate Your Racing Experience with OMP Champ-R Racing Seat HA/766E/N

Enhance the racing experience in your BMW or MINI with the OMP Champ-R Racing Seat HA/766E/N. Engineered for optimal performance and safety, this racing seat provides unparalleled support and comfort during high-speed maneuvers. Crafted with premium materials, it ensures durability and reliability on the track. The ergonomic design promotes proper posture, reducing driver fatigue for extended racing sessions. With its sleek and sporty appearance, this racing seat adds a touch of style to your BMW or MINI's interior.

  • Provides unparalleled support and comfort
  • Crafted with premium materials for durability
  • Ergonomic design reduces driver fatigue
  • Sleek and sporty appearance enhances interior aesthetics
Show More Show Less
OMP - Corporate Logo
T#:391800
Part#: OD/1990
Ships in 6 Business Days
$ 279.00 USD
Free Shipping
$ 279.00 USD
Free Shipping
Universal sport steering wheel with a 330mm diameter.
OMP - Corporate Logo
T#:393729
Part#: HC/731E
Ships in 10 Business Days
$ 95.00 USD
Free Shipping
$ 95.00 USD
Free Shipping
Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick


OMP - Corporate Logo
T#:393745
Part#: OD/2018
Ships in 10 Business Days
$ 189.00 USD
Free Shipping
$ 189.00 USD
Free Shipping

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less
OMP - Corporate Logo
T#:391803
Part#: OD/1954
Ships in 10 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less