Turner Motorsport for BMW 3 Series E30 (1984-1991)

Turner Aluminum Throttle Cable Bushings

T#:641028

Part#: 006585LA01-01

In Stock

Sale - Save 54% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.23 USD

Add to Wish List

Qty

Sale - Save 54%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.23 USD

Add to Wish List

No more slow starts! Does your car feel old? Age may not be the issue at all, your throttle cable bushings are mostly likely worn out and your car has lost its pep!

Your throttle cable is the main connection you have from the gas pedal to the throttle body. Do you have hesitation or delayed pedal response? Think of when you are sitting at a stop light or making a turn into a flow of traffic, you may not realize it but if you haven't replaced your throttle cable and bushings this will require you to apply pressure to the gas pedal before getting feedback which can cause slow starts at stop lights and put you in danger when merging in traffic. These are not issues with old cars, they are issues related to your throttle response!

Symptoms to look for: lackluster/sloppy throttle actuation, deformed throttle cable appearance, and bushing condition. Your throttle cable bushings can be soft, cracked or even disintegrated by now.

Upgrade from failed rubber to new billet aluminum bushings for quick gas pedal response and a better engagement with your car.

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

Not vehicle specific. You MUST measure prior to purchasing!

T#:9642119

Part#: 026732TMS06-17

In Stock

Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Qty

Sale - Save 53%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD

Add to Wish List

Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!

Show More Show Less

Turner BMW 10mm Wheel Spacers (Pair) Normal Pad - Most BMWs (see appl...

T#:340487

Part#: TWH9905010

In Stock

Sale - Save 55% $ 227.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 103.53 USD

Add to Wish List

Sale - Save 55%

$ 227.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 103.53 USD

Add to Wish List

10MM (.39 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA 10mm Fitment Note: You must be very careful when fitting 10mm spacers to any BMW. Since the depth of the hubcentric lip will vary, you risk bottoming out of the spacer before it sits flush with the hub. This will leave a gap between the spacer and the hub, seriously compromising the strength of the spacer. The lip on the car may need to be shaved down so the 10mm spacer will fit flush on the rotor hat. Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal

Show More Show Less

E30, Z3 Rear Sway Bar Lower Link Reinforcement Kit

T#:3775

Part#: TSU3075305

In Stock

Sale - Save 60% $ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.35 USD

Add to Wish List

Qty

Sale - Save 60%

$ 47.99

This product was last offered at the strikethrough price on
05-03-2026

$ 19.35 USD

Add to Wish List

This product reinforces the metal swaybar link mounting point on the rear trailing arm. The sheet metal breaks off the trailing arm due to the constant up and down loads being placed on the trailing arm from the swaybar. Problems increase when larger sway bars are used. This product eliminates the problem by thickening the sheet metal and triangulating the mounting point. A good time to install this kit would be when you are doing any rear suspension work, exhaust, or even if you are just doing a differential fluid change. This part requires welding for installation.

Click here for installation instructions.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

Silver 19mm M12x1.5mm Turner Race Wheel Nut

- Designed for use with stud-converted cars, will not fit stock vehicles!

T#:3137

Part#: TWH9952R19

In Stock

Sale - Save 67% $ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.67 USD

Add to Wish List

Qty

Sale - Save 67%

$ 22.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.67 USD

Add to Wish List

Turner Motorsport's five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a chrome coating and they incorporate several innovative features. The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it's far too easy to start the threads with the nut being crooked. The 19mm head of the nut is slightly rounded to help the socket find its position. The chrome plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track. Features: Developed for our Grand-Am / Continental race team High grade steel to withstand the extreme abuse of air guns and race conditions Bright chrome plating to help tire changer zoom in on their target quickly and accurately Minimal plating won't result in excess coating wearing off and "gumming up" the threads 19mm hex to prevent rounding off Rounded top for fast socket engagement Recessed threads to aid in fast nut-to-stud alignment without cross threading We recommend using with Turner Motorsport bullet nose dry-lube wheel studs Price is per nut.

Show More Show Less

E30 M3 Front Sway Bar Reinforcement Kit

T#:3415

Part#: TSU3075312

In Stock

Sale - Save 76% $ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.22 USD

Add to Wish List

Qty

Sale - Save 76%

$ 29.99

This product was last offered at the strikethrough price on
05-03-2026

$ 7.22 USD

Add to Wish List

Every E30 M3 that comes into our shop gets the front swaybar tab inspected. This is such a common problem but with an easy fix. If left to worsen you may be looking at an entire strut housing replacement. Fix it now with these reinforcing plates and a little welding! Not only will modified suspensions put stress on the mounts but age will reduce their strength as well. Reinforcing the swaybar mount to the strut will keep your swaybar geometry in spec and prevent a costly and ugly repair.

This item fits the following BMWs:
1987-1991 E30 BMW M3

Show More Show Less

Project Cars

SELECT YOUR BMW

Turner Motorsport for BMW 3 Series E30 (1984-1991)

Sub-Categories

Turner Aluminum Throttle Cable Bushings

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...

Turner BMW 10mm Wheel Spacers (Pair) Normal Pad - Most BMWs (see appl...

E30, Z3 Rear Sway Bar Lower Link Reinforcement Kit

Silver 19mm M12x1.5mm Turner Race Wheel Nut

E30 M3 Front Sway Bar Reinforcement Kit

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results