Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
Vague or slopping shifter feel even after installing a short shifter or new OE shifter linkage bushings? Looking for a more precise shifter feel in your classic BMW? Consider replacing your old, worn rubber rear shifter bushing with new Turner poly to get the best shifting experience possible! The Turner engineering team wasn’t satisfied with the other options on the market, so we set out to design the best solution for ease of installation and performance.
The competition requires the installer to cut or burn the rubber bushing out of the stock housing to be able to install their poly bushing, requiring reuse of an old worn out housing, or buying a new costly bushing assembly. We decided this was cumbersome and unnecessary, so we designed a complete upgrade replacement bracket with a 70A polyurethane bushing preinstalled for a quick bolt-in installation. Our bracket is precision formed with a CNC machined and TIG welded bushing cup to perfectly match the OEM bracket, and is made from 304 stainless steel for exceptional corrosion resistance. The result is a complete design solution that creates much crisper shifting with nearly zero added NVH for a more engaging and enjoyable driving experience.
Note: Some shifter arms have a mushroom-shaped end. Use extra care installing our bushing on these arms. Filing this mushroom down makes installation easier, however simply applying sufficient pressure to the back side of the bushing during installation will allow this bushing to install smoothly.
This is the last bushing you will ever want or need for your E28, E30, or E34!
Product Features:
This fits the following BMWs:
1987-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1987-1988 E28 BMW 528e 533i 535is M5
1987-1989 E24 BMW M6
1993-1995 E34 BMW 525i 530i 535i
1991-1993 E34 BMW M5
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
If you've ever bled the clutch hydraulic system on your BMW, you know how frustrating it can be. Designed with both DIY enthusiasts and professional technicians in mind, our clever tool simplifies one of the most notoriously annoying steps in clutch service.
Crafted from high-quality aluminum and finished in a durable black anodized coating, our clutch slave cylinder bleeder tool is built to last. Its function is simple: the adjustable piston rod applies controlled pressure directly to the clutch slave cylinder’s piston, compressing it and reducing its internal volume. By minimizing the amount of air trapped inside the cylinder, bleeding becomes faster, cleaner, and far more effective—no more endless pedal pumping or inconsistent clutch feel. The result is firm, consistent clutch pedal engagement and a smoother overall driving experience, all achieved with less time and effort underneath the car.
FEATURES & BENEFITS
Simplifies bleeding the BMW clutch hydraulic system by reducing trapped air in the slave cylinder Eliminates excessive pedal pumping and inconsistent clutch feel Helps achieve firm, consistent clutch pedal engagement Crafted from high-quality aluminum for strength and longevity Durable black anodized finish resists wear and corrosion Designed for both DIY enthusiasts and professional technicians PRODUCT DEVELOPMENT
Our Clutch Slave Cylinder Bleeder Tool was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
If allowed in the rules these solid aluminum transmission mounts offer many advantages over a urethane or Delrin mounts. It's no wonder that these mounts have found their way into the top BMW racers in the country. These are machined from solid aluminum and have zero deflection, engine torque will cause a rubber or urethane mount to flex or deflect allowing more torque to passed through the drive line (instead of being wasted winding up the mount). This puts the shift linkages in better consistent alignment. And unlike rubber or urethane the aluminum has zero wear and is not affected by leaking oil or other fluids so this is likely the last set of transmission mounts you will ever need. We very strongly recommend using the solid transmission and engine mounts together as a complete kit, mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.
These are a no-compromise design for all-out racing use, full solid aluminum mounts should not be used on street-driven cars since there is no material to absorb vibration making these quite harsh for regular street use (track cars don't care about noise).
Product features and benefits:
This item fits the following BMWs:
1989-1995 E34 BMW 525i 530i 535i 540i M5
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i 540i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The ULTIMATE shifter upgrade for your BMW! Experience more precise throws, less shift lever travel, and an all-around transformation in your shifting experience.
For dozens of years, enthusiasts have critiqued the imprecise and vague feeling of BMW manual transmissions. Plagued with long throws, fore and aft play in gear, and a generally loose feeling, your OEM BMW shifter leaves much to be desired. While most standard carrier-mount short throw shifter kits will aid in reducing throw length and eliminating side-to-side play in gear, some enthusiasts long for a hardcore, race-inspired shifter that completely removes play and excessive throw length. At Turner Motorsport we share the same desire and set out to offer the ULTIMATE upgrade with this Performance Chassis Mount Short Shifter.
WHY UPGRADE?
Factory BMW shifter assemblies are complex by nature. The main component of this assembly is the shift carrier, a cast aluminum piece positioned inside the transmission tunnel that incorporates bushings at both ends for mounting. Like most factory parts, these bushings are designed to reduce NVH (noise, vibration, and harshness) transmission to the cabin. To the spirited driver, however, these bushings translate to flex and vagueness in the shift lever. Moreover, because this carrier is mounted to both the transmission and the body, the entire shifter assembly will "float" with the driveline, further increasing the vague and imprecise feeling of your shifter.
Our Performance Chassis Mount Short Shifter removes the shift carrier assembly entirely—removing any prospect of flex caused by bushings or driveline movement. By contrast, this chassis mount shifter offers a drastic reduction in shift lever travel, vagueness, and side-to-side play. An elevated base allows for moving the fulcrum point upwards, resulting in a much shorter and more precise throw. Shift times are further reduced by a tall, "rally style" shift lever, used to aid in leverage while also bringing the lever closer to the steering wheel. Our design incorporates a proprietary centering spring design, which is adjustable for increasing or decreasing self-centering force. In short, this design eliminates all the drawbacks of your factory BMW shifter, translating to more control, greater precision, shorter throws, and faster shift times.
FEATURES & BENEFITS
Reduced Throw: Modified shifter geometry and heightened fulcrum point translate to a shorter shift lever throw
Improved Shifter Feel: Eliminating the shift carrier and associated bushings drastically reduces "slop" and side-to-side play in the shift lever
Increased Precision: Mounting the shifter to the chassis allows for little to no variation in gear selection
Universal Fitment: Fits many BMW chassis with the provided base plate and hardware (see "Fits These Cars" for exact fitment information)
DESIGN
6061 aluminum, 4130 steel, and 316 stainless steel construction
A type-II black anodized finish
Adjustable self-centering spring
"Rally Style" shift lever
Spherical bearing pivot with maintenance-free brass insert
Product Development:
Our Chassis Mount Shifters are designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
BMW Shifter Carrier Arm Bushings - Round are essential for enhancing shifting precision and feel in your BMW’s manual transmission. These 90A urethane bushings from Turner Motorsport replace the stock rubber bushings, which tend to wear out quickly, resulting in sloppy shifting. Designed to fit at the front of the shifter carrier arm, these bushings securely attach the carrier to the transmission, providing a stiffer connection that minimizes excessive play without increasing vibration. This upgrade is perfect for enthusiasts seeking a more responsive shifting experience.
These bushings are compatible with various BMW models, including the E30, E36, E46, E28, E34, E39, E24, and Z1 Roadster, and serve as a direct replacement for BMW part #25117519669. Installation is simple when the shifter carrier is removed from the vehicle.
These are the stock rubber motor mounts. When motor mounts begin to wear the engine can shift and contact other things in the engine compartment, mostly cooling-related parts. This is especially troublesome on older models. Don't neglect your motor mounts! A worn motor mount allows the engine to twist and shift around. The harder you're driving the more shift will occur. Twisting of the engine can also lead to shifting problems as the transmission twists with it. There are countless issues related to worn or compressed motor mounts so don't overlook these as a regular replacement item (every 50,000 miles).
OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.
Fits the following chassis:
E34, E32
The Powerflex Rear Diff Front Mount Bushing (Race) for BMW E34 5 Series and E32 7 Series is a premium upgrade designed for enhanced drivetrain stability and performance. Here’s another description:
Race-Grade Polyurethane: Part of Powerflex’s Race Series, this bushing is crafted from a super-stiff polyurethane compound, designed to eliminate the excessive movement found in factory rubber bushings. The Race Series is optimized for track and high-performance driving, where minimizing flex is crucial for precision handling.
Purpose: This bushing replaces the front mount of the rear differential, a critical point where unwanted flex can reduce performance. By stiffening this mount, the bushing ensures improved power transfer to the wheels and reduces drivetrain slop, making the car feel more connected and responsive.
Key Features:
Benefits:
Fitment: Tailored specifically for the BMW E34 (5 Series) and E32 (7 Series) models, this bushing replaces the front differential mount and offers a perfect fit, ensuring no compromises on installation or function.
In summary, the Powerflex Rear Diff Front Mount Bushing (Race Series) is an essential upgrade for BMW E34 and E32 owners looking for improved drivetrain rigidity, better handling, and longer-lasting components. Perfect for performance enthusiasts and track-goers, it enhances rear suspension control and reduces drivetrain movement for sharper, more precise driving experiences.
This product was last offered at the strikethrough price on
08-13-2026
This product was last offered at the strikethrough price on
07-23-2026
