BMW Internal Engine Parts for BMW 5 Series E34 (1987-1995)

Supertech Upgraded Valve Stem Seal Kit - BMW S54 S52 S50 M54 M52 M50 ...

T#:641030

Part#: VS-VBM6-6CYLKT

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Includes a full set of polyacrylic intake and viton exhaust valve stem seals! Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

Supertech Performance Exhaust Valve - BMW M50 M52

T#:640219

Part#: BMEVN-1030S

Ships in 8 Business Days

$ 29.99 USD

Add to Wish List

Qty

$ 29.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

Supertech Performance Intake Valve - BMW M50 M52

T#:302459

Part#: BMIVN-1030

Ships in 8 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Supertech valves are some of the best on the market, made from one piece of forged stainless steel for the ultimate in strength and durability. Supertech valves go through a special heat treatment process that obtains the right amount of harness for each engine to ensure the ultimate valve for your performance motor. These valves are hardened black nitrided, which is most popular in European and Japanese motors.

Show More Show Less

SuperTech Dual Valve Spring Upgrade Kit w/ Steel Retainers - 80lbs - ...

T#:26038568

Part#: SPRKH1000DBMST

In Stock at Vendor

20% off MSRP $ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,042.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 833.99 USD

Add to Wish List

Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.

Show More Show Less

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper - Set Of 24 ...

T#:21604313

Part#: KPR-6S-7-24

Ships in 6 Business Days

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

BMW M42 M50 M52 M54 6mm Single Groove Valve Keeper is a precision-engineered component essential for securing valves in BMW engines. Turner Motorsport offers this high-quality valve keeper, designed to fit specific Supertech valves for enhanced performance and reliability.

Precision Fit: Designed specifically for BMW M42, M50, M52, and M54 engines, ensuring a perfect fit with 6.0mm single groove valves.
High-Quality Construction: Made from durable materials to withstand high-pressure conditions and provide long-lasting performance.
Enhanced Valve Security: Two keepers are required per valve to securely hold the valve in place, preventing movement and ensuring consistent engine performance.
Compatibility: Ideal for use with certain Supertech valves, providing a reliable solution for engine builds and upgrades.
Easy Installation: Simple to install with standard tools, offering a hassle-free upgrade or replacement option.

Show More Show Less

Supertech Black Nitrided Intake Valve - +1mm Oversize - Set Of 12 - B...

T#:8549425

Part#: BMIVN-1031S-12

In Stock

$ 384.99

This product was last offered at the strikethrough price on
06-03-2026

$ 347.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 384.99

This product was last offered at the strikethrough price on
06-03-2026

$ 347.99 USD

Limited Qty Sale

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our intake valves are made exclusively from an enhanced versions of EV8 (21-4N) steel. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 33mm Material: Stainless Steel 21-4N Groove Type: Triple Groove Length: 123.7mm Stem Diam: 6.95mm

Show More Show Less

SuperTech Black Nitrided Exhaust Valve - +1mm Oversize - Single Valv...

T#:640986

Part#: BMEVN-1031S

Ships in 8 Business Days

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Head Diam: 31.50mm Material: Black Nitride Groove Type: Single Groove Length: 105.65mm Stem Diam: 5.95mm Size: 1mm+

Show More Show Less

Supertech Black Nitrided Exhaust Valve - Set Of 12 - BMW M50/M52/S50/...

For vehicles equipped with the M50TU engine, will not fit vehicles equipped with the M5...

T#:8549426

Part#: BMEVN-1030-12

In Stock at Vendor

$ 358.99 USD

Add to Wish List

Qty

$ 358.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Black Nitride Coating Head Diam: 30.50mm Material: Black Nitride Groove Type: Triple Groove Length: 105.65mm Stem Diam: 5.95mm Size: Std

Show More Show Less

Supertech Triple Groove Valve Locks - Set Of 24 - BMW M50 2.5L, S50 3...

T#:8549424

Part#: KPR-VW6-T-24

In Stock at Vendor

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Upgraded valve locks from Supertech - features a triple groove for compatible intake and exhaust valves.

Supertech BMW M50/M52/S50/S52 Inconel Exhaust Valve - Set Of 12 ...

T#:9126167

Part#: BMEVI-1030S-12

In Stock at Vendor

$ 562.99 USD

Add to Wish List

Qty

$ 562.99 USD

Add to Wish List

The exhaust valves in your vehicle allow the exhaust port to be sealed during the combustion process, so that the engine can run at top efficiency. If the timing belt or lifter breaks, this can cause the piston to come in contact with the valve and bend or break it, causing an improper seal. This will cause a rough idle, misfires, and a check engine light condition. Be sure to replace your bent or broken valve today and keep your engine running strong.

Show More Show Less

Supertech BMW M50/M52/S50/S52 Black Nitrided Intake Valve - Set Of 12...

T#:9126168

Part#: BMIVN-1030S-12

In Stock at Vendor

$ 384.99 USD

Add to Wish List

Qty

$ 384.99 USD

Add to Wish List

Generally, an intake valve is the name for a valve that allows air or fluid to pass through it, typically during the intake phase of an engine's operation. In your car, the intake valves allow an air and fuel mixture into the engine's cylinders where it can then be compressed. The valves shut during the compression phase and the spark plug ignites the air and fuel mixture, creating a force that propels the car forward. If these valves aren’t working properly, the engine will create less power and it can damage the engine over time.

Show More Show Less

SuperTech Black Nitrided Exhaust Valve - +1mm Oversize - Set Of 12 -...

T#:11857222

Part#: BMEVN-1031S-12

Ships in 8 Business Days

$ 322.99 USD

Add to Wish List

Qty

$ 322.99 USD

Add to Wish List

Upgraded valves designed for high horsepower applications! Our valves are not finished from generic blanks rather they are specifically designed for each and every application. We work relentlessly, testing and researching every aspect trying to improve the air flow of our designs. With every valve design, we strive to maximize durability through higher fatigue resistance and tensile strength. Each valve tip is hardened beyond 52HRc. It’s unlikely you will find any of our competitor’s valves with stricter dimensional tolerances than our Supertech valves. Combine that with finished seats with equally strict run out tolerances and you won’t find a better sealing, better performing and easier to install solution anywhere! Optimum high flow rates are achieved by ensuring that our valves are manufactured with the best angles for each application. We consider back cut, under cut and valve head angles for each application to produce the optimum high flow rates for each application. In 2006 we introduced our stem Superfinishing as a standard addition to all of our valves at no additional cost. When our Superfinish is combined with our Black Nitrided valve, it reduces the surface roughness to 1/3 of our chrome coated valve. The end result… unsurpassed performance and durability. Our exhaust valves are made from EV16 (21-8N) or EV8-Nb/w for greater strength at higher temperatures. Black Nitride Coating: This is a hardening treatment that has been steadily growing in popularity over the last several years. These black Nitride coated valves feature harder surfaces and smoother finishes, providing less friction and subsequently longer life. Please see below for more benefits of our Black Nitride valves. Head Diam: 31.50mm Material: Black Nitride Groove Type: Single Groove Length: 105.65mm Stem Diam: 5.95mm Size: 1mm+

Show More Show Less

Supertech Upgraded Valve Stem Seal Kit - BMW S38 3.5L 3.6L

T#:641032

Part#: VS-VW7-S38KT

Ships in 8 Business Days

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

Includes a full set of polyacrylic intake and viton exhaust valve stem seals! Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 9.8mm/.385" Seal OD: 13.2mm/.520"

Show More Show Less

Supertech BMW M50/M52/S50/S52 Dual Valve Spring Kit

T#:9126166

Part#: PRK-H1000D-BM

Ships on Aug 5, 2026

$ 763.99 USD

Add to Wish List

Qty

$ 763.99 USD

Add to Wish List

OEM INA Engine Timing Chain - M50, M52, M54, S50, S52

T#:42301980

Part#: ZC0255

Ships in 2 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Preserve the performance and longevity of your BMW with the OEM INA Engine Timing Chain. Timing chains stretch over time causing sluggish performance, a check engine light or even a misfire. Replace yours today!

Show More Show Less

Single Groove Valve Keeper 6mm - Priced Each

T#:3268708

Part#: KPR-6S-7

In Stock

$ 5.99

This product was last offered at the strikethrough price on
03-04-2026

$ 2.99 USD

Add to Wish List

Qty

$ 2.99 USD

Add to Wish List

Two required per valve, for use with certain supertech valves 6.0mm single groove

Supertech 6mm Intake Valve Stem Seal - Polyacrylic - BMW S54 S52 S50 ...

T#:641011

Part#: VS-VBM6I

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62

We Price Match - Give Us A Call or Chat!

T#:360996

Part#: 11321748884

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe

Show More Show Less

Supertech 6mm Exhaust Valve Stem Seal - Viton - BMW S54 S52 S50 M54 M...

T#:641010

Part#: VS-VBM6E

In Stock

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 8.8mm/.347" Seal OD: 12.2mm/.480"

Show More Show Less

SuperTech Dual Valve Spring Upgrade Kit w/ Steel Retainers - 67lbs - ...

T#:51426477

Part#: SPRKH100DRBMST

Back Ordered

$ 833.99 USD

Add to Wish List

Qty

$ 833.99 USD

Add to Wish List

Crafted from premium Superclean Chrome Silicon Vanadium Steel alloy, these valve springs offer exceptional performance and durability even at high RPMs. CAD engineering ensures that the wire stress levels remain within defined limits for long-lasting durability, even under extreme racing conditions. Advanced computer software allows Supertech to meticulously control harmonics, ensuring optimal performance. Manufactured with high-quality military-certified Steel, the retainers are CNC machined to provide a precise fit, guaranteeing longevity and reliability.

Show More Show Less

Supertech 7mm Intake Valve Stem Seal - Polyacrylic - BMW S14 S38 ...

T#:641013

Part#: VS-VW7I

Ships in 4 Business Days

$ 0.99 USD

Add to Wish List

Qty

$ 0.99 USD

Add to Wish List

Looking to replace your valve stem seals due to leaks, cracks, splits, or even during an upgrade of your camshafts, valve springs, or valves? Supertech valve stem seals are the way to go! This cheap but effective seal replaces the stock BMW seals that are notoriously prone to issues due to heat cycles and chemicals which cause the seals to become weak and brittle. Supertech seals offer a significantly longer life span and are resistant to both heat and chemicals thanks to their use of Viton or Polyacrylic construction (dependant on valve type). That means less time in the garage and more time on the street or track! These seals are also great for anyone who is looking to upgrade to dual valve springs thanks to the seal's overall thinner outer diameter! Guide OD: 9.8mm/.385" Seal OD: 13.2mm/.520"

Show More Show Less

VW-Audi 7mm Exhaust Valve stem seal / Viton (SET OF 6)

T#:35795475

Part#: VS-VW7E-6

Ships in 5 Business Days

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Valve keeper for Audi/BMW/Opel 6mm stem Triple groove - Supertech ...

T#:26704985

Part#: KPR-VW6-T

Ships in 8 Business Days

$ 1.99 USD

Add to Wish List

Qty

$ 1.99 USD

Add to Wish List

VW-Audi 7mm Exhaust Valve stem seal / Viton (SET OF 8)

T#:35795474

Part#: VS-VW7E-8

Ships in 8 Business Days

$ 9.99 USD

Add to Wish List

Qty

$ 9.99 USD

Add to Wish List

SuperTech - Performance Dual Valve Spring Kit With Titanium Retainers...

T#:44699186

Part#: SPRK-H1005D-M20

Ships in 8 Business Days

$ 855.99 USD

Add to Wish List

Qty

$ 855.99 USD

Add to Wish List

VW-Audi 7mm Exhaust Valve stem seal / Viton (SET OF 12)

T#:35795472

Part#: VS-VW7E-12

Ships in 8 Business Days

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

VW-Audi 7mm Exhaust Valve stem seal / Viton (SET OF 10)

T#:35795473

Part#: VS-VW7E-10

Ships in 8 Business Days

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Ina Rocker Arm - E28, E30, E34

We Price Match - Give Us A Call or Chat!

T#:557719

Part#: 11331271429

Back Ordered

$ 26.99 USD

Add to Wish List

Qty

$ 26.99 USD

Add to Wish List

Broken rocker arms are a real concern. Replace your broken arm or preventatively replace all of them.

INA Timing Guide Rail - Priced Each

We Price Match - Give Us A Call or Chat!

T#:7164804

Part#: 11311736408

Back Ordered

$ 10.99 USD

Add to Wish List

Qty

$ 10.99 USD

Add to Wish List

Timing chains tend to wear grooves into the guide rails over time. Too much wear could cause damage to the chain if the rail goes unplaced. OEM replacement for BMW part # 11311736408. OEM Schaeffler (INA, LuK, Ruville, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM INA Engine Oil Pump Chain - E36, E46 ,Z3 , Z4

T#:42301987

Part#: ZC0128

Back Ordered

$ 13.99 USD

Add to Wish List

Qty

$ 13.99 USD

Add to Wish List

Keep your BMW’s heart pumping strong, use the INA Oil Pump Chain to replace your stetched and worn out oil pump chain to ensure your engines oiling system is operating at peak performance.

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 5 Series E34 (1987-1995)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results