BMW Performance Clutch Kits & Parts for BMW 5 Series E34 (1987-1995)

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit from Turner Motorsport offers a high-performance solution with a lightweight design for improved throttle response and exceptional torque capacity. Ideal for high-performance racing applications, this kit provides the ultimate balance between drivability and power.

• Lightweight Design: Enhances throttle response and overall driving dynamics.
• High Torque Capacity: Supports up to 340 ft/lbs of torque, making it suitable for performance-driven applications.
• Precision Engineering: Features the latest pressure plate design and friction material for optimal balance between drivability and performance.
• Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.

Specifications:

• Clutch Disc Diameter: 9.448"
• Clutch Disc Spline: 10
• Disc Material: Organic
• Disc Type: Sprung Solid
• Input Shaft Diameter: 1.140625"
• Flywheel Step: -3.8mm
• Maximum Torque Capacity: 340 ft/lbs
• Recommended Use: Street Use

Includes:

• Single Mass Flywheel
• 1 Sprung Organic Clutch Disc
• Pressure Plate
• Flywheel Bolts
• Pressure Plate Bolts
• Release Bearing
• Alignment Tool
• Clutch Spline Grease

XClutch performance upgrades are developed with over 30 years of experience and advanced testing facilities, offering top-notch engineering for both street and race applications.

Upgrade the holding power of your clutch with the Clutch Masters FX250 clutch kit.

FX250 (Stage II)

• Extra long life street system
• Holding capacity 70% over stock
• Heavy-Duty reinforced pressure plate
• Sprung organic/fiber tough disc

All Clutch Masters clutch kits come complete with:

• Pressure Plate
• Clutch Disc
• Throw-out Bearing
• Pilot Bearing or Bushing
• Alignment Tool
• Pressure Plate Bolts

This clutch kit does not include a flywheel. Requires use of single mass flywheel 

Upgrade the whole driving experience of your car with a single mass clutch and flywheel conversation paired with new upgraded engine and transmission mounts. These street durometer mounts are 70 and 75 durometer for an improved but not too harsh driving experience. This clutch and flywheel upgrade features a slightly heavier pedal feel with smooth engagement, paired with your upgraded drivetrain mounts you are sure to have confidence in how sturdy your car drives!

Our performance clutch and flywheel kit utilizes an upgraded ECS E34 M5 clutch kit with our in-house engineered flywheel to fit all M5x and S5x motors with a 5-speed transmission. By eliminating the dual-mass flywheel and replacing it with a single-mass we are able to eliminate the slack and extra weight of the flywheel for a quicker throttle response and acceleration. Our upgraded clutch kit utilizes all the best features of the original M5 clutch with an upgraded pressure plate and clutch disc, with the new clutch you have a better, more engaged clutch pedal feel, engagement, and longevity.

Whether you're replacing a worn-out clutch or upgrading for increased power handling, this E34 M5 clutch and flywheel kit offers a reliable solution for enhanced pedal feel, power capacity, and overall driving satisfaction.

Paired with a modified geometry flywheel, the E34 M5 style clutch is ideally suited for most E36, E46, and others using the same powertrain. It checks all the boxes for essential clutch replacement features. While some aftermarket options may address slipping issues and worn-out clutches, they often sacrifice pedal feel, providing little to no resistance. A soft clutch not only kills the driving experience of your BMW but also reduces confidence when pushing the car to its limits.

On the contrary, you might be in the market for an upgraded clutch to handle your modified engine/forced induction builds. You go from an OE or aftermarket clutch option that has a lackluster and soft pedal feel to the complete opposite side of the spectrum, a very stiff clutch that grabs like an on-and-off switch making the clutch a pain almost undrivable on the street resulting in your favorite car turning into your least favorite car to drive.

The E34 M5 clutch and flywheel kit balances performance with practicality, ensuring a satisfying driving experience whether you're maintaining your BMW or preparing it for increased power demands.

Kit Contents:

Single Mass Flywheel - E34 M5 Clutch Geometry Performance Clutch Disc and Pressure plate Throw-out Bearing Pilot Bearing Clutch Alignment Tool Flywheel Bolts - Qty 8 Pressure Plate Botls - Qty 6 Clutch features:

Torque Capacity (Crankshaft): 375 Ft / Lbs Clutch Disc: 240mm Full face, performance organic friction material with integrated copper for enhanced heat dissipation and a long component life OE-like friction backing plate design for smooth engagement with dual-stage damping springs to reduce gear noise and driveline chatter, and for smooth engagement Pressure Plate Increased clamp force over OEM, rated at 1,729lbs of pressure Flywheel features:

Eliminates factory dual mass Improved throttle response Improved acceleration Hardened 4140 Chromoly Steel Designed for use with any E34 M5 pressure plate and clutch for OE-type clutch feel Weighs in at just 16.5lbs vs Factory Dual Mass - 25.3 lbs SFI certified Polyurethane Transmission Mount Set - Street

70A durometer rating - slightly stiffer than stock for improved shifting quality and driveline performance. Constructed of 304 stainless steel with bonded and constrained polyurethane. The transmission mounts in your car play a critical role in your suspension. With this in mind, the stock mounts have been known to experience failures causing over-revving, mis-shifts, and in extreme cases, even chassis damage. Combat this issue with upgraded polyurethane transmission mounts from ECS Tuning. Designed with the street and track in mind, we've got you covered no matter your driving style. Fears of torn mounts are a thing of the past; a mechanical interlock feature makes these mounts ideal even for high-torque, forced-induction applications. Engine Mounts - 75A Durometer

Keep your engine securely mounted with our solid, non-fluid-filled mounts. Our ECS 75A Durometer engine mounts are custom-made in-house by our leading R&D department. These mounts result from countless hours of research and testing to establish the best possible bushing design to minimize engine vibration and driveline deflection while maximizing strength. ECS Tuning's primary goal was to achieve an economical, durable & compliant ride while maximizing performance. After putting down thousands of real-world test miles on multiple vehicles, we've done just that. With exposure to heat and elements, your motor mounts will break down with increasing age. A secure mount* is vital to reduce drivetrain vibration and transfer as much horsepower to the wheels as possible. These mounts are an upgrade for non-M E36/E46 owners seeking a stiffer mount without sacrificing comfort and ride quality.