BMW Performance Clutch Kits & Parts for BMW 5 Series E34 (1987-1995)

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

T#:385699

Part#: 520-060-228

Ships on Aug 31, 2026

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This flywheel replaces the stock original single-mass flywheel and should only be used with the corresponding 'single-mass' clutch kit. According to BMW the single mass flywheel was installed in all 325i up to 12/86 production date but we have seen some later cars with a single-mass flywheel. The age of the car almost guarantees one or more clutch replacements and possibly a change to the original flywheel as well. You may not know which flywheel is currently installed until the flywheel cover or the transmission is removed.

Stock Flywheel Weight = 18.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1984-1991 E30 BMW 325i 325ic 325is (with single-mass flywheel)
1989-1990 E34 BMW 525i (with single-mass flywheel)

Show More Show Less

E34 M5 JB Racing Lightweight Aluminum Flywheel

T#:3772

Part#: 520-090-240

Ships in 10 Business Days

$ 581.00 USD

Add to Wish List

Qty

$ 581.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable.

Stock Flywheel Weight = 16.0lbs
JB Flywheel Weight = 8.0lbs

This item fits the following BMWs:
1991-1995 E34 BMW M5

Show More Show Less

Stage 2 Single Disc Clutch Kit - Ceramic

T#:26904982

Part#: XKBM23001-1B

In Stock

$ 540.99 USD

Add to Wish List

Qty

$ 540.99 USD

Add to Wish List

The XClutch Stage 2 Single Disc Clutch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 8 7/8" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 9/64" Friction Surface Configuration - Raised Flywheel Step - +0.009 Assembly Weight Maximum Torque Capacity - 370 Recommended Use - Performance Street Use Includes Single Mass Flywheel 1 Ceramic Disc Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

8 In. Twin Solid Ceramic Disc Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776635

Part#: XKBM20530-2E

In Stock

$ 1,787.99 USD

Add to Wish List

Qty

$ 1,787.99 USD

Add to Wish List

The XClutch 8" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +2.2mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Track Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9 In. Twin Solid Organic Disc Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776642

Part#: XKBM23589-2G

Ships in 3 Business Days

$ 1,808.99 USD

Add to Wish List

Qty

$ 1,808.99 USD

Add to Wish List

The XClutch 9" Twin Solid Organic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Organic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +3.8mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Organic Clutch Disc 1 Solid Rigid Organic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit ...

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776628

Part#: XKBM24508-1A

Ships in 3 Business Days

$ 1,440.99 USD

Add to Wish List

Qty

$ 1,440.99 USD

Add to Wish List

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit from Turner Motorsport offers a high-performance solution with a lightweight design for improved throttle response and exceptional torque capacity. Ideal for high-performance racing applications, this kit provides the ultimate balance between drivability and power.

Lightweight Design: Enhances throttle response and overall driving dynamics.
High Torque Capacity: Supports up to 340 ft/lbs of torque, making it suitable for performance-driven applications.
Precision Engineering: Features the latest pressure plate design and friction material for optimal balance between drivability and performance.
Enhanced Pedal Feel: Carefully analyzed pivot point and diaphragm design ensure positive pedal feel and increased clamping force.

Specifications:

Clutch Disc Diameter: 9.448"
Clutch Disc Spline: 10
Disc Material: Organic
Disc Type: Sprung Solid
Input Shaft Diameter: 1.140625"
Flywheel Step: -3.8mm
Maximum Torque Capacity: 340 ft/lbs
Recommended Use: Street Use

Includes:

Single Mass Flywheel
1 Sprung Organic Clutch Disc
Pressure Plate
Flywheel Bolts
Pressure Plate Bolts
Release Bearing
Alignment Tool
Clutch Spline Grease

XClutch performance upgrades are developed with over 30 years of experience and advanced testing facilities, offering top-notch engineering for both street and race applications.

Show More Show Less

E34 535i JB Racing Lightweight Aluminum Flywheel

T#:647

Part#: 520-170-240

Ships in 2 Business Days

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Show More Show Less

Performance Throw-out Bearing

2X Entries For Our G87 M2 Sweepstakes!

T#:583039

Part#: 53151600791

Ships in 5 Business Days

$ 104.00 USD

Add to Wish List

Qty

$ 104.00 USD

Add to Wish List

Stage 2 Sprung Ceramic Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776630

Part#: XKBM24508-1B

Back Ordered

$ 1,573.99 USD

Add to Wish List

Qty

$ 1,573.99 USD

Add to Wish List

The XClutch Stage 2 Single Sprung Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance street applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.448" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid Input Shaft Diameter - 1.140625" Flywheel Step - -3.8mm Maximum Torque Capacity - 520 ft/lbs Recommended Use - Street Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9 In. Twin Solid Ceramic Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24809861

Part#: XKBM23589-2E

Ships in 3 Business Days

$ 1,924.99 USD

Add to Wish List

Qty

$ 1,924.99 USD

Add to Wish List

The XClutch 9" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +3.8mm Maximum Torque Capacity - 1350 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

7.25 In. Twin Solid Ceramic Disc Ckutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776631

Part#: XKBM18530-2E

Ships in 3 Business Days

$ 1,862.99 USD

Add to Wish List

Qty

$ 1,862.99 USD

Add to Wish List

The XClutch 7.25" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.244" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +2.5mm Maximum Torque Capacity - 900 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Organic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

9 In. Twin Solid Ceramic Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24809862

Part#: XKBM23589-2P

Ships in 3 Business Days

$ 3,112.99 USD

Add to Wish List

Qty

$ 3,112.99 USD

Add to Wish List

The XClutch 9" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9.055" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +3.8mm Maximum Torque Capacity - 1350 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

8 In. Twin Solid Ceramic Disc Clutch And Flywheel Kit

For Vehicles with 5-Speed Transmission and 10 Spline Input Shaft

T#:24776633

Part#: XKBM20530-2B

Ships in 3 Business Days

$ 1,886.99 USD

Add to Wish List

Qty

$ 1,886.99 USD

Add to Wish List

The XClutch 8" Twin Solid Ceramic Clutch And Flywheel Kit offers a lightweight design for improved throttle response combined with high torque capacity, making it ideal for high performance racing applications. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7.874" Clutch Disc Spline - 10 Disc Material - Ceramic Disc Type - Sprung Solid :Solid Input Shaft Diameter - 1.140625" Flywheel Step - +2.2mm Maximum Torque Capacity - 890 ft/lbs Recommended Use - Racing Use Includes Single Mass Flywheel 1 Solid Sprung Ceramic Clutch Disc 1 Solid Rigid Ceramic Clutch Disc Pressure Plate Flywheel Bolts Pressure Plate Bolts Release Bearing Alignment Tool Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.

Show More Show Less

BMW E30 E34 Stage 1 Single Disc Clutch Kit - Organic

T#:26904981

Part#: XKBM23001-1A

Special Order: No Guaranteed ETA

$ 399.99 USD

Add to Wish List

Qty

$ 399.99 USD

Add to Wish List

BMW E30 E34 Stage 1 Single Disc Clutch Kit - Organic by Turner Motorsport is an exceptional choice for performance upgrades and conversions. This kit is designed to deliver an ideal balance between drivability and performance for various BMW applications. The advanced pressure plate design and high-quality organic friction material ensure reliable performance and positive pedal feel. Key benefits include:

Optimized Clutch Performance: Engineered to provide excellent drivability and increased clamping force for enhanced performance.
High-Quality Construction: Features an advanced pressure plate design and organic friction material for reliable and consistent engagement.
Improved Pedal Feel: Careful analysis of the pivot point and diaphragm design ensures a positive and responsive pedal experience.
High Torque Capacity: Capable of handling up to 240 ft-lb of torque, suitable for performance street use.
Complete Kit: Includes everything needed for installation: organic disc, pressure plate assembly, flywheel bolts, pressure plate bolts, release bearing, clutch spline grease, and pilot bearing.

Turner Motorsport's expertise and advanced clutch testing facilities ensure this clutch kit meets the highest standards of engineering and performance.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Clutch Kits & Parts for BMW 5 Series E34 (1987-1995)

Sub-Categories

E30 325i, E34 525i (M20) JB Racing Lightweight Aluminum Flywheel (Rep...

E34 M5 JB Racing Lightweight Aluminum Flywheel

Stage 2 Single Disc Clutch Kit - Ceramic

8 In. Twin Solid Ceramic Disc Clutch And Flywheel Kit

9 In. Twin Solid Organic Disc Clutch And Flywheel Kit

BMW E36 Z3 Stage 1 Single Sprung Organic Clutch and Flywheel Kit ...

E34 535i JB Racing Lightweight Aluminum Flywheel

Performance Throw-out Bearing

Stage 2 Sprung Ceramic Clutch And Flywheel Kit

9 In. Twin Solid Ceramic Clutch And Flywheel Kit

7.25 In. Twin Solid Ceramic Disc Ckutch And Flywheel Kit

9 In. Twin Solid Ceramic Clutch And Flywheel Kit

8 In. Twin Solid Ceramic Disc Clutch And Flywheel Kit

BMW E30 E34 Stage 1 Single Disc Clutch Kit - Organic

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results