BMW Suspension Parts for BMW E36 (1992-1998) M3

TC Kline Racing Double-Adjustable Coilover Suspension Kit - E36 ...

T#:27705437

Part#: TCKRDACK3F4R

Ships in 2 Business Days

$ 3,570.99 USD

Add to Wish List

Qty

$ 3,570.99 USD

Add to Wish List

TC Kline Racing, a leader in BMW performance parts, delivers unparalleled street and track performance with their Double-Adjustable Coilover Suspension Kit for the E36 3er. This kit combines cutting-edge technology and premium materials to elevate your driving experience to new heights.

Key Features:

Smart Shock technology for optimal performance VVS alloy springs (300# front, 400# rear) Koni double-adjustable cartridges for seamless street to race transitions Camber/caster plates for supreme adjustability Ride height adjustability for personalized setup BUNA rubber RSMs for reduced flex This comprehensive kit includes:

8711-1007LSPTC - TCK/Koni Coilover Driver’s Side Strut 8711-1007RSPTC – TCK/Koni Coilover Passenger’s Side Strut TCKFSXXXS – TCK VVS Alloy Short Front Springs (300#F/400#R) 8242-1007L/RSPTC – TCK/Koni Double Adjustable Rear Shocks TCKRSXXX – TCK VVS Alloy Rear Springs (customized rates) TCKRUM12R – Pair of Reinforced BUNA Rubber Shock Mounts (12mm sleeve) TCKRSA – Pair of TCK Rear Spring Adjusters Camber Plates - 1 pair Experience the ultimate blend of performance and value with TC Kline Racing's Double-Adjustable Coilover Suspension Kit.

Show More Show Less

TC Kline Single Adjustable Street/Track Coilover Kit - E36

T#:594681

Part#: TCKE36SINGLEKIT

Back Ordered

$ 2,554.99 USD

Add to Wish List

Qty

$ 2,554.99 USD

Add to Wish List

Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .

Show More Show Less

Rear Shock Mounts (RSM) HP Aluminum/Rubber - E30, E36, E46, Z3, Z4 (P...

T#:3666

Part#: JTD909

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

These are the best rear shock mounts that we have found for the E30, E36, E46, Z3 & E85 Z4! Featuring CNC-machined billet aluminum mounting base with a replaceable urethane bushing (replacement bushings are just $15 and are changed in minutes!). These mounts are excellent for either street or track because of their low NVH (noise, vibration, and harshness). Plus, the superior design will far outlast the life of stock mounts - maybe even the car itself. You'll never think twice about your shock mounts again! These shock mounts are a direct replacement of the stock mounts so they fit all shocks with the BMW-standard 10mm shock shaft, including all factory and OEM shocks (Boge, Sachs, etc), H&R coil overs, Bilstein shocks and PSS, PSS9, PSS10 coil overs (except the B16 Ride Control Kit). This is sold as a package with new shock mount gaskets, washers, and Nyloc nuts.

Must re-use factory cupped washers!

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

IRP Adjustable Steel Rear Control Arm Pair - E36 E46 Z4

T#:401372

Part#: IRPCA-ST

In Stock

$ 233.99 USD

Add to Wish List

Qty

$ 233.99 USD

Add to Wish List

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

Strong Steel Construction
Adjustable
Painted Yellow For Corrosion Protection
Weight Reduction
Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

IRP Performance Rear Polyurethane Shock Mount Kit - E30 E36 E46 Z3 Z4...

T#:401369

Part#: IRPRTM-P

Ships in 1 Business Day

$ 110.00 USD

Add to Wish List

Qty

$ 110.00 USD

Add to Wish List

Looking to stiffen up your rear shock mount without going for a solid rear mount? The Polyurethane Rear Performance Strut Mount from IRP will give you the stiffer reinforcement without giving you the typical noise, vibration, and harshness that come with traditional performance strut mounts. The polyurethane also helps with preventing rear shock blowouts, a common problem for stock BMW rear mounts that are paired with stiffer than stock suspension.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

IRP Rear Shock Mount Upper Reinforcement Plates

T#:5282924

Part#: IRPRSMP-30

In Stock

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. Rear shock mount reinforcement plates by IRP that fit a large number of E chassis 3 series cars between E30, E36, E46 and also the Z3 and Z4.

Show More Show Less

Bav Auto Trailing Arm Bushing and Ball Joint Tool - Master Set ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580410

Part#: B8800100

Ships on Oct 19, 2026

Sale - Save 3% $ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Qty

Sale - Save 3%

$ 222.99

This product was last offered at the strikethrough price on
05-03-2026

$ 216.30 USD

Add to Wish List

Remove and install the three bushings and ball joints that are pressed into the rear trailing arm. Use this one tool kit for on-vehicle or off-vehicle removal and replacement of the Rear Trailing Arm Bushing, Outer Upper Control Arm Bushing (ball joint) and Outer Lower Control Arm Bushing (ball joint). This tool is designed to work on E36 3-series (except E36 318ti), E46 3-series, E83 X3 and E85/E86 Z4 Coupe & Roadster.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

IRP Adjustable Camber/Caster Plates - E36 BMW

T#:401379

Part#: IRPE36ACCP-2

In Stock

$ 295.99

This product was last offered at the strikethrough price on
08-25-2026

$ 261.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 295.99

This product was last offered at the strikethrough price on
08-25-2026

$ 261.99 USD

Limited Qty Sale

Add to Wish List

**For vehicles with stock style springs**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height.

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

Decreased understeer
Decreases outside edge tire wear
Aircraft Grade Aluminum Construction
Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

Show More Show Less

Polyurethane Rear Trailing Arm Bushings - E36/E46

T#:582005

Part#: PTABE6GREEN

Ships in 1 Business Day

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3

For shocks with a standard 10mm pin diameter

T#:1105924

Part#: RSM-E6-10MM

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 10mm threads.

Show More Show Less

IRP Adjustable Camber/Caster Plates - E36 BMW

T#:401378

Part#: IRPE36ACCP-1

In Stock

$ 288.99 USD

Add to Wish List

Qty

$ 288.99 USD

Add to Wish List

**For vehicles with coilover front suspension**

When looking to dial in your steering geometry and alignment for reduced tire where and/or better track handling, the stock suspension is quite limited. To fix this, you can install Camber/Caster plates such as these plates from IRP. Camber/Caster plates allow for adjustment of the top position of the shock's mounting position. These slight adjustments have a huge impact on the stance of the of the wheel when driving straight down the road and when turning into a corner. With simple adjustments, you can increase the grip of the tires in hard turns, improve tread life, or even just make an alignment correction for a vehicle with a lowered ride height.

The IRP Camber Caster plates are made of an aircraft grade aluminum body, for strength and low weight, with an adjustable mounting plate that utilizes a steel monoball mounting point. This makes the plate resistant to corrosion and prevents deformation even with the stiffest shocks and springs.

Features:

Decreased understeer
Decreases outside edge tire wear
Aircraft Grade Aluminum Construction
Steel Monoball and Mounting Sleeves

Fits the following BMWs:
1991-1999 E36 BMW

Show More Show Less

Polyurethane Rear Subframe Bushings - E36

T#:582007

Part#: PSBE36GREEN

Ships in 3 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Polyurethane Rear Subframe Bushings - E36

T#:582008

Part#: PSBE36BLACK

Ships in 2 Business Days

$ 159.99 USD

Add to Wish List

Qty

$ 159.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Full Polyurethane Bushing Kit - E36

T#:1105899

Part#: FBK-E36C95A

Ships in 5 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Utilizing high-precision machining technologies and their very own Polyurethane Manufacturing Department, every Revshift product is designed, manufactured, and tested in-house at their Detroit, Michigan facility.

Show More Show Less

Revshift Rear Shock Mount Kit - 80A - BMW E30 E36 E46 Z3

For shocks with a larger 12mm pin diameter

T#:1105925

Part#: RSM-E6-12MM

Ships in 2 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Revshift rear shock mounts are CNC machined from 6061 billet aluminum and hard anodized black for protection. They are fitted with our highest quality 80A polyurethane bushings and chromoly sleeves. The class 10.9 hardware is zinc plated for corrosion resistance. These rear shock mounts can be rebuilt with one of our refresh kits sold separately. Fitment: BMW E30, E36, E46, Z3, and Z4. All OEM and aftermarket rear shocks with 12mm threads.

Show More Show Less

IRP Rear Adjustable Strut Bar - E36

Does not fit convertible models

T#:401436

Part#: IRPRSB-36

In Stock

$ 188.99 USD

Add to Wish List

Qty

$ 188.99 USD

Add to Wish List

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides.

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection.

Easily installed with basic hand tools.

*Does not fit convertible chassis"

Fits the following BMW chassis:
E36 BMW All Submodels

Show More Show Less

TC Kline Racing Camber Caster Plates - E36 E9X

T#:401266

Part#: TCKE36CAMPLA

Ships in 2 Business Days

$ 489.00 USD

Add to Wish List

Qty

$ 489.00 USD

Add to Wish List

One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it. NOTE: Will not fit with Bilstein Struts/Shocks. Can only be used with Linear style springs. Will not fit OE-Style Progressive / Barrel style springs. Fits the following BMW's 1992-1999 E36 BMW - 318ti 318i/is/ic 323i/is/ic 325i/is 328i/is/ic M3 2006-2013 E9X BMW - 325i/xi 328i/xi 330i/xi 335i/is/ix M3

Show More Show Less

Full Polyurethane Bushing Kit - E36 - 95A - Green - Offset Bushings ...

T#:1980634

Part#: FBKOFFSET

Ships in 7 Business Days

$ 379.99 USD

Add to Wish List

Qty

$ 379.99 USD

Add to Wish List

Stiffen your suspension and improve your handling with these Revshift upgraded suspension bushings. Improves handing Will not wear out like oem bushings Properly dampens suspension components

Replacement Bushings for Rear Shock Tower Mounts

T#:1386

Part#: JTD909-75-KIT

Ships on Sep 16, 2026

$ 32.00 USD

Add to Wish List

Qty

$ 32.00 USD

Add to Wish List

The bushings in the Aluminum Rear Shock Tower Mounts (#JTD909) and the Repair Shop Rear Shock Mounts (#JRDRP) are replacable. Simply disassemble the shocks and mounts, replace the bushings, and reassemble. On the JTD909 the shock mount doesn't even have to be removed from the chassis. This set includes enough bushings to replace bushings on both the left and right mounts (4 total).

Show More Show Less

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389646

Part#: 192416-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389647

Part#: 192416-2L

Ships on Sep 18, 2026

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

IRP Adjustable Front Strut Brace - E36 BMW

T#:401358

Part#: IRPFSB-36

Special Order: No Guaranteed ETA

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

A strut tower brace adds additional reinforcement to the front strut towers, tying them together for extra rigidity. This makes the whole structure stronger with less chassis flex. Handling and steering feel are improved with better turn-in and input with no downsides.

The IRP adjustable strut brace bar is a high quality brace that is constructed of 100% steel for guaranteed reinforcement and prevention of flex. The brace bar is painted black to ensure corrosion protection and to add to the looks of the engine bay.

Easily installed with basic hand tools.

Fits the following BMW chassis:
E36 BMW All Submodels

Show More Show Less

IRP Performance Rear Pillow-Ball Shock Mount - E30 E36 E46 Z3 Z4 ...

T#:401368

Part#: IRPRTM-B

Special Order: No Guaranteed ETA

$ 185.99 USD

Add to Wish List

Qty

$ 185.99 USD

Add to Wish List

Want the best performance option in shock tower mounts? IRP has created their pillow-ball rear shock mounts for just this need. These rear shock mounts are designed for use on the track and racing. This set of mounts will help your rear shocks perform the best they can in all conditions. The advantage to using a mount with spherical bearing is that it allows the shock to freely move off axis without side loading the shock shaft like rubber or polyurethane mounts do. Side loading a shock increases stiction and wear which decreases its efficiency. Because these are mounts without an isolator (rubber or polyurethane) to dampen road noise and vibrations we do not recommend them for street cars.

The bearing sleeve and poly bushing are built to work with all stock style shocks such as Bilstein and H&R coilover and suspension kits.

Fits the following BMW chassis:
E36 BMW All Submodels except for 318ti
E46 BMW All Submodels
E30 BMW All Submodels
E36 Z3 BMW All Submodels
E85/E86 Z4 BMW All Submodels

Show More Show Less

Karbonius E36 M3 / 3-Series Carbon Strut Brace

T#:28104803

Part#: E36SB01

In Stock

Starting at $ 839.00 USD

Add to Wish List

Starting at $ 839.00 USD

Add to Wish List

Strut tower bar is one of the most common and effective upgrades in a vehicle. With installation of strut bar bodywork gets structural strength, preventing tower flex and alignment changes during sporty driving. Improve your BMW with Karbonius strut bar and prepare for people staring! In Karbonius Composites, we have inspired in E46 BMW performance strut bar to create our own strut bar. We have designed a piece extremely strong but light at the same time, what adds not only strength and stability, but also a spectacular eye-catching look. A strut bar manufactured in prepreg carbon fiber and cured in aluminum mold in autoclave; CNC machined manufactured in 5-axis machine. Standard finish includes varnish high gloss and natural aluminum anodized. Product Details: Fits all E36 and M3 2x2 weave Very light, only 1150 grs weight Perfect fitment and easy installation 100% carbon fiber prepreg Cured in aluminum mold and autoclave Controlled break zone Exclusive and numbered piece 2-year warranty NOTE: All pieces are numbered to guarantee authenticity and origin.

Show More Show Less

E36, E46, Z3 Rear Shock Mount Reinforcement (Sold Each)

10X Entries Into Our F80 M3 Sweepstakes

T#:578621

Part#: B3300044

In Stock

Sale - Save 17% $ 11.99

This product was last offered at the strikethrough price on
08-17-2026

$ 9.99 USD

Add to Wish List

Qty

Sale - Save 17%

$ 11.99

This product was last offered at the strikethrough price on
08-17-2026

$ 9.99 USD

Add to Wish List

This is a direct replacement for the factory BMW rear shock mount reinforcement, as equipped by BMW on Z3 models. This also fits all E36 and E46 models as well. Turner Motorsport makes our own that are thicker but these can also do a good job of preventing cracks and deformation of the rear shock towers. Priced per reinforcement plate. Order 2 to cover both rear shock towers. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty. This item fits the following BMWs: 1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 325i 325is 328i 328is M3 (not for convertible models) 1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not for convertible models) 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Show More Show Less

AAF Steel Tie Downs(pair)

T#:7624657

Part#: 116127

In Stock

$ 18.00 USD

Add to Wish List

Qty

$ 18.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. Steel car tie down loops are an easy way to add a strong tie down to you car. These tie down loops bolt right to your rear lower shock bolts or your front control arm rear mounts with just a longer bolt. Comes as a pair.

Show More Show Less

IRP Adjustable Camber Plates for Drift Kit

T#:5282933

Part#: IRPACCP-36D

Special Order: No Guaranteed ETA

$ 275.00 USD

Add to Wish List

Qty

$ 275.00 USD

Add to Wish List

IRP (Individual Race Parts) is a performance aftermarket parts company that focuses on high quality and long term reliability. Adjustable camber plates for use with the E36 IRP Drift Kit.

IRP Lock Kit Standard Drift Suspension Kit - E36

T#:401478

Part#: IRPDK36-1

Special Order: No Guaranteed ETA

$ 1,209.99 USD

Add to Wish List

Qty

$ 1,209.99 USD

Add to Wish List

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 65 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

Kit features:

CNC Laser Cut Components
Plug & Play - includes all needed hardware
Increase to 65 Degree (or more) steering angle
Includes Camber Plates
Stiffer offset control arm bushings
Roll Center and Bump Steer Correction Plates
High strength control arms with steel monoball ball joints
Increased length steering tie rods with steel monoball ball joints
DriftAllstar- & EEDC-Tested
Total weight of all components included: 13.5 kg / 29.8 lbs

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

Show More Show Less

IRP Lock Kit Pro Drift Suspension Kit - E36

T#:401479

Part#: IRPDK36-2

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock, are a chromolon tubular system, and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 70 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

*This Pro kit offers reduced weight control arms that help this kit shed 2.9 lbs from the standard kit while still remaining just as strong thanks to their chromolon tubular design.*

Kit features:

CNC Laser Cut Components
Plug & Play - includes all needed hardware
Increase to 70 Degree (or more) steering angle (5 degrees more than standard version)
Includes Camber Plates
Stiffer offset control arm bushings
Roll Center and Bump Steer Correction Plates
High Strength chromolon tubular control arms with steel monoball ball joints (2cm wider than standard version)
Increased length steering tie rods with steel monoball ball joints
DriftAllstar- & EEDC-Tested
Total weight of all components included: 12.2kg / 26.9lbs (1.3kg / 2.9lbs lighter that standard version)

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

Show More Show Less

Bavarian Autosport Front Stress bar - E36 OBDI (1992-1995)

10X Entries Into Our F80 M3 Sweepstakes

T#:578805

Part#: 010414

Special Order: No Guaranteed ETA

Sale - Save 20% $ 289.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 289.99

This product was last offered at the strikethrough price on
05-03-2026

$ 231.99 USD

Add to Wish List

Add stiffness and style to your E36.

Bav Auto Trailing Arm Bushing Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580370

Part#: B8800047

In Stock

Sale - Save 10% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Qty

Sale - Save 10%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 110.69 USD

Add to Wish List

Remove and install rear trailing arm bushings without removing the trailing arms from the vehicle.

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 1, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

Bav Auto Control Arm Bushing Press Tool - E30 E36 E46 Z3 Z4

10X Entries Into Our F80 M3 Sweepstakes

T#:580360

Part#: B8800033

Ships in 1-3 days

Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Removes and installs control arm bushings while leaving the control arm on the car.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less