BMW Suspension Parts for BMW E36 (1992-1998) M3

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

TC Kline Racing - Corporate Logo
T#:27705437
Part#: TCKRDACK3F4R
Ships in 2 Business Days
$ 3,570.99 USD
$ 3,570.99 USD

TC Kline Racing, a leader in BMW performance parts, delivers unparalleled street and track performance with their Double-Adjustable Coilover Suspension Kit for the E36 3er. This kit combines cutting-edge technology and premium materials to elevate your driving experience to new heights.

Key Features:

Smart Shock technology for optimal performance VVS alloy springs (300# front, 400# rear) Koni double-adjustable cartridges for seamless street to race transitions Camber/caster plates for supreme adjustability Ride height adjustability for personalized setup BUNA rubber RSMs for reduced flex This comprehensive kit includes:

8711-1007LSPTC - TCK/Koni Coilover Driver’s Side Strut 8711-1007RSPTC – TCK/Koni Coilover Passenger’s Side Strut TCKFSXXXS – TCK VVS Alloy Short Front Springs (300#F/400#R) 8242-1007L/RSPTC – TCK/Koni Double Adjustable Rear Shocks TCKRSXXX – TCK VVS Alloy Rear Springs (customized rates) TCKRUM12R – Pair of Reinforced BUNA Rubber Shock Mounts (12mm sleeve) TCKRSA – Pair of TCK Rear Spring Adjusters Camber Plates - 1 pair Experience the ultimate blend of performance and value with TC Kline Racing's Double-Adjustable Coilover Suspension Kit.

Show More Show Less
TC Kline Racing - Corporate Logo
T#:594681
Part#: TCKE36SINGLEKIT
Back Ordered
$ 2,554.99 USD
Free Shipping
$ 2,554.99 USD
Free Shipping
Lifetime warranty on street driven cars! TC Kline's coilover kits feature proprietary TC Kline Racing Koni dampers, camber plates, and recommended, track proven spring rates. This kit includes 400#F/500#R springs .
Show More Show Less
Rear Upper Spring Pad - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:552370
Part#: 33531094754
In Stock
$ 39.99

This product was last offered at the strikethrough price on
06-03-2026

$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up

URO M Sport Front Bump Stop - BMW E30 E36 Z3
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639169
Part#: 31332225377
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Replacement front strut bump stop from URO - Should be replaced when replacing struts

KYB - Corporate Logo
T#:5760270
Part#: 31332227898
Ships in 1-2 days
$ 112.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
Show More Show Less
KYB - Corporate Logo
T#:5760249
Part#: 31332227897
In Stock
$ 112.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel. Price is per mount. This is the LEFT side (Driver's) mount.
Show More Show Less

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Suspension Reinforcement Kit E36
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15777304
Part#: 002478ECS01-KT
In Stock
$ 122.99 USD
Free Shipping on orders $49 and up
If you already upgraded your suspension but are looking for the finishing touch, this kit is what you need. The BMW front strut mount reinforcement plates reduce the risk of the shock tower mushrooming and cracking. The ECS rear shock mount reinforcement plates reduce the risk of the rear shock mount area tearing and deforming. The ECS Delrin rear trailing arm bushing limiters reduce the movement that the RTAB's can make resulting in a tighter rear suspension and with less moment prolongs the bushing life.
Show More Show Less

Sachs - Corporate Logo
T#:370537
Part#: 33522228415
In Stock
$ 123.41

This product was last offered at the strikethrough price on
06-03-2026

$ 114.99 USD
Free Shipping
$ 114.99 USD
Free Shipping
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost.This rear shock is a direct replacement for the factory shock and can be used on either the left or right side. Sold individually.
Show More Show Less

Front Control Arm Bracket Kit - E30, E36, Z3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:343068
Part#: TSU9995PB3KT
In Stock
Sale - Save 18% $ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Sale - Save 18%
$ 117.99

This product was last offered at the strikethrough price on
03-17-2026

$ 97.30 USD
Free Shipping
Control arm bushing brackets do not typically wear or fatigue. But we sell replacement brackets as a convenience to go with new bushings (press one bushing instead of pressing out the old). For racers it's a great idea to keep a spare set of bushings with brackets on hand since pressing bushings at a racetrack is not ideal. Keep a spare set to avoid hassle and downtime.
Show More Show Less
Differential Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:641882
Part#: 33171134871
Ships in 1 Business Day
$ 27.99 USD
Free Shipping on orders $49 and up
Rear Bumpstop - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:31589440
Part#: 33502290348
Ships in 3 Business Days
$ 25.99 USD
Free Shipping on orders $49 and up


Sachs - Corporate Logo
T#:372563
Part#: 312252
Back Ordered
$ 331.99 USD
Free Shipping
$ 331.99 USD
Free Shipping
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front right strut is a direct replacement for the factory strut assembly.
Show More Show Less
TC Kline Racing - Corporate Logo
T#:401266
Part#: TCKE36CAMPLA
Ships in 2 Business Days
$ 489.00 USD
Free Shipping
$ 489.00 USD
Free Shipping
One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should. Made from aircraft grade aluminium, with stainless steels strut inserts and hardware for the ultimate in durability for street or track use. The built in reinforcement plate reduces the stress on the shock tower to reduce the chance of the shock towers tearing. With a maximum adjustment rang of -1.5 degrees camber per side, these plates will allow you to get your suspension right where you need it. NOTE: Will not fit with Bilstein Struts/Shocks. Can only be used with Linear style springs. Will not fit OE-Style Progressive / Barrel style springs. Fits the following BMW's 1992-1999 E36 BMW - 318ti 318i/is/ic 323i/is/ic 325i/is 328i/is/ic M3 2006-2013 E9X BMW - 325i/xi 328i/xi 330i/xi 335i/is/ix M3
Show More Show Less
KYB - Corporate Logo
T#:378618
Part#: 343352KT
Ships in 1 Business Day
$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping

E36 M3 Bilstein/H&R Sport Suspension Package
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:340166
Part#: E36M3SPORT
Ships in 3 Business Days
$ 1,523.99

This product was last offered at the strikethrough price on
07-29-2026

Starting at $ 1,343.99 USD
Free Shipping
Starting at $ 1,343.99 USD
Free Shipping
As great as the E36 M3 stock suspension is, it still has compromises. From spring rate to ride height, the suspension was spec'd to be appealing to a wide range of BMW customers. In other words, they couldn't make it a track car for the road and still sell 50,000 of them. If you think your M3 could carry more speed through corners with less bodyroll, and look better with a lower stance, this suspension could be for you.

H&R Sport springs lower the ride height by 1.5" in front and 1.0" in the rear and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:
  • 1 set - H&R Sport Springs (29910 or 29910-2)
  • 1 - Bilstein Left Front Sport strut (VE3-A585 / 35-105855)
  • 1 - Bilstein Right Front Sport strut (VE3-A586 / 35-105862)
  • 1 pair - Bilstein Rear Sport Shocks (BE5-2453 / 24-024532)

This item fits the following BMWs:
1995-1999 E36 BMW M3
Show More Show Less

Rein Rear Lower Control Arm - E36, E46
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592413
Part#: 33326770813
In Stock
$ 71.99 USD
Free Shipping on orders $49 and up
Complete including bushing
Sachs - Corporate Logo
T#:372562
Part#: 312253
Ships in 1 day
$ 311.53 USD
Free Shipping
$ 311.53 USD
Free Shipping
OEM Sachs shocks provide you with the same great ride quality the car originally came with from the factory at a fraction of the cost. This front left strut is a direct replacement for the factory strut assembly.
Show More Show Less

Shocks and spring Installation Kit - E36 M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:553649
Part#: 31332228345KT2
Ships on Feb 22, 2027
$ 1,540.99

This product was last offered at the strikethrough price on
04-09-2026

$ 1,118.99 USD
Free Shipping
$ 1,118.99 USD
Free Shipping

This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle. 

 

Fits the following BMW's

1995 BMW E36 M3 S50 

Show More Show Less
Complete Rear Upper Shock Mounting Kit
For coupe models only
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5416757
Part#: 33521092362TMSKT
Ships on Feb 22, 2027
Sale - Save 15% $ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD
Free Shipping
Sale - Save 15%
$ 115.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.18 USD
Free Shipping
Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty rear shock mount reinforcement plates Locking nuts Select your vehicle for additional fitment information. **Note** Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your damper and source accordingly.
Show More Show Less

3-series Strut/Shock Mount Kit - E36 M3 96-99
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:348546
Part#: TMS11812DK
Ships on Feb 22, 2027
Sale - Save 2% $ 439.99

This product was last offered at the strikethrough price on
08-04-2026

Starting at $ 432.75 USD
Free Shipping
Sale - Save 2%
$ 439.99

This product was last offered at the strikethrough price on
08-04-2026

Starting at $ 432.75 USD
Free Shipping

This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:

  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets

In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

This item fits the following BMWs:
1996-1999 E36 BMW M3
1996-2002 Z3 BMW 2.5 2.5i 2.8 3.0i M Coupe

Show More Show Less

Shocks and spring Installation Kit - E36 M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:553817
Part#: 31312489795KT2
Ships on Feb 22, 2027
Sale - Save 1% $ 585.99

This product was last offered at the strikethrough price on
08-14-2026

$ 578.24 USD
Free Shipping
Sale - Save 1%
$ 585.99

This product was last offered at the strikethrough price on
08-14-2026

$ 578.24 USD
Free Shipping

This kit is contains all new strut and shock mounts and hardware needed when installing a aftermarket suspension on your vehicle.

Click here for spring options  

 

Fits the following BMW's

1996-1999 BMW M3

Show More Show Less
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships on Sep 18, 2026
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less


Packaged by Turner - Corporate Logo
T#:582934
Part#: T31122227249KT
Ships on Feb 22, 2027
$ 2,326.99

This product was last offered at the strikethrough price on
04-15-2026

$ 1,851.99 USD
Free Shipping
$ 1,851.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links
Strut Tower Reinforcement Plate
Strut Mount & Gasket

Show More Show Less
Packaged by Turner - Corporate Logo
T#:338064
Part#: 31129069035
Ships in 2 Business Days
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Starting at $ 46.99 USD
Free Shipping on orders $49 and up
Anytime that you replace your front control arms you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These are the control arm bushings from the 1996-1999 E36 M3 and have the hole in the center.

These are the stock bushings bushings from the 1996-99 E36 M3 and MZ3 but are a great upgrade for any E30 - 318/325, E36 - 325/323/328, and Z3 -1.9, 2.3, 2.5, 2.8, 3.0. They have more rubber than the non-M stock bushings. We have found the increased volume of rubber helps the bushings last longer and have better steering response due to less deflection of the bushing. These bushings can actually help reduce vibrations produced by the mass of larger wheels or brakes.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Coupe M Roadster
Show More Show Less
Basic Monoball Bearing Service Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:401616
Part#: 80402KT2
Back Ordered
Sale - Save 2% $ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD
Free Shipping on orders $49 and up
Sale - Save 2%
$ 103.99

This product was last offered at the strikethrough price on
05-03-2026

$ 101.44 USD
Free Shipping on orders $49 and up
This monoball service kit is designed to ensure long-lasting performance of your BMW suspension components by providing the correct CV-2 grease and a Schwaben snap-in grease gun nozzle—perfect for proper installation and routine maintenance at every oil change.
Show More Show Less

Meyle HD Front Control Arm Refresh Kit - E36 M3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:372488
Part#: 311222284612KT
Back Ordered
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping
This kit is for optimal cost savings when replacing front control arms on your S52-powered E36 M3. Includes E36 non-M front control arms and offset control arm bushings for close to factory suspension geometry on 96-99 E36 M3, and correct geometry for 95
Show More Show Less

Packaged by Turner - Corporate Logo
T#:594529
Part#: 311222284612KT12
Back Ordered
$ 431.99 USD
Free Shipping
$ 431.99 USD
Free Shipping
Packaged by Turner - Corporate Logo
T#:582933
Part#: T31122228461KT
Back Ordered
$ 853.99

This product was last offered at the strikethrough price on
08-25-2026

$ 852.99 USD
Free Shipping
$ 852.99 USD
Free Shipping

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 3 kit replaces:

Control Arms & Bushings
Outer Tie Rods
Sway Bar End Links
Strut Tower Reinforcement Plate
Strut Mount & Gasket

Show More Show Less

Packaged by Turner - Corporate Logo
T#:338063
Part#: 31129064875
Back Ordered
Starting at $ 207.99 USD
Free Shipping
Starting at $ 207.99 USD
Free Shipping
Anytime that you replace your front control arms (which should be often), you must replace your control arm bushings. The reason is because it's hard to tell if you're bushings are really bad and they are often destroyed when removed. These bushings have the hole off-center to give your car a little more track, caster, and camber. They are a solid rubber bushing that is great for the street. These came as standard equipment on E30 M3s (8/89-later) and 1995 E36 M3s.

For convenience, we carry the steel bushing carrier brackets (part# TSU9995PB3) with new hardware which will save you downtime caused by pressing out the old bushings and pressing in the new bushings.

This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
Show More Show Less
X Brace Install Kit - E36
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56507860
Part#: 51718175003KT2
In Stock
New Item
$ 38.28 USD
Free Shipping on orders $49 and up
Engineered for precision and durability, this Turner curated hardware kit delivers the structural retention needed for an X-Brace retrofit or complete underbody panel refresh. We combine high grade BMW factory hardware, including the critical blind rivet nuts required to install an X-Brace onto subframes lacking threaded inserts, with robust Bremman securing components.
Show More Show Less

URO - Corporate Logo
T#:598534
Part#: 51718413359
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up

Discover the Turner Motorsport URO Rear Shock Mount Reinforcement Plate, individually priced for E30, E36, E46, and Z3 BMW models. This mounting plate provides essential support at the rear shock mounting point, enhancing stability and durability. Engineered by URO, renowned for quality auto parts, this reinforcement plate is designed to address and prevent issues related to the rear shock mounting, ensuring a reliable and secure connection for a variety of BMW models.

  • Individually priced for cost-effective customization.
  • Enhances support at the rear shock mounting point.
  • Designed for E30, E36, E46, and Z3 BMW models.
  • URO quality ensures durability and reliability.
  • Addresses and prevents issues related to rear shock mounting.

Upgrade your BMW's rear shock mounting system with the Turner Motorsport URO Rear Shock Mount Reinforcement Plate for increased stability and longevity.

Show More Show Less

OEM Elring Front Strut Mount Gasket - E36, Z3, E38
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:2706181
Part#: 31331094288
In Stock
$ 6.99 USD
Free Shipping on orders $49 and up
Replacement front strut mount gasket, for the left or right side.
Strut Housing Dust Cover 32MM - Black
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:558006
Part#: 31311139453
In Stock
$ 1.99 USD
Free Shipping on orders $49 and up
Replace your lost or cracked strut housing dust cover with this new replacement.
Rear Spring Pad - 5mm - E30 E36 E46 X3 Z3 Z4
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:5345
Part#: 33531136385
In Stock
$ 7.99 USD
Free Shipping on orders $49 and up
$ 7.99 USD
Free Shipping on orders $49 and up
This is the rear spring pad it can be used as an upper spring pad on some cars and a lower spring pad on others.. It is a good idea to replace spring pads while replacing shocks or springs. Sold Individually.

This item fits the following BMWs:
Lower Spring Pad
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe

Upper Spring Pad
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
Show More Show Less


M3 Control Arm Bushing Set
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373158
Part#: 31129069035
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
$ 19.99 USD
Free Shipping on orders $49 and up
Replacement bushing. This is an upgrade for non-M cars.
Front Control Arm Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15677518
Part#: 31126758513-KT
In Stock
Sale - Save 6% $ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping on orders $49 and up
Sale - Save 6%
$ 330.99

This product was last offered at the strikethrough price on
05-08-2026

$ 311.82 USD
Free Shipping on orders $49 and up
Symptoms of a worn suspension include a loose and imprecise feel to the steering, excessive shaking through the steering during braking, or sounds like squeaking, whining or grinding from the front when turning at slow speeds. This kit will not only help address these issues but is designed to have superior performance compared to stock, and extend suspension life. Level 1 contains: 2 front control arms 2 control arm bushings
Show More Show Less
BMW Rear Axle Spring Pad Lower 33531135420
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:15787
Part#: 33531135420
In Stock
$ 8.99 USD
Free Shipping on orders $49 and up
BMW SPRING PAD LOWER

Elring - Corporate Logo
T#:369495
Part#: 33107505602
In Stock
$ 9.64 USD
Free Shipping on orders $49 and up

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW engines:
E30 318i/is 325e 325i/ix M3
E36 318i/ic/is/ti 323i/is 325i/is 328i/is M3
E28 524td 528e 533i 535i
E34 525i 530i 535i
E24 633CSi 635CSi
E23 733i 735i
E32 735i/iL
Z3 1.9 2.5 2.5i 2.8 3.0i M Coupe/Roadster

Show More Show Less

Elring Shock Mount Gasket - E36, E46, Z3
2X Entries Into Our F80 M3 Sweepstakes
Elring - Corporate Logo
T#:12582
Part#: 33521128734
In Stock
$ 1.11

This product was last offered at the strikethrough price on
04-09-2026

$ 1.09 USD
Free Shipping on orders $49 and up
$ 1.09 USD
Free Shipping on orders $49 and up

This is a high quality replacement for the stock gasket that is located between the shock mount and the body of the car.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Show More Show Less
URO Rear Control Arm Bushing - E36, E46, E83, Z4
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592410
Part#: 33321092247
In Stock
$ 9.16 USD
Free Shipping on orders $49 and up
Upper control arm to subframe bushing

Trailing Arm Ball Joint - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:372965
Part#: 33321138722
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
Located in the upper part of the rear trailing arm
Shock Mount Plate
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639326
Part#: 33526762325
In Stock
$ 5.99 USD
Free Shipping on orders $49 and up
Rear spring strut cupped washer e36 e46 e85 and more

Rear Upper Spring Pad - 7.5mm
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:349002
Part#: 33531136386
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
Isolates the body from the rear coil spring

Upper Spring Pad - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:31092525
Part#: 31331128523
In Stock
$ 8.63 USD
Free Shipping on orders $49 and up
Rear Stabilizer End Link - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:372983
Part#: 33551126932
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
No hardware included.
OEM Rein Front Sway Bar Bushing - 23mm - E34 E36 Z3
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:375742
Part#: 31351135805
Ships in 1 Business Day
$ 3.95

This product was last offered at the strikethrough price on
05-14-2026

$ 3.05 USD
Free Shipping on orders $49 and up
$ 3.05 USD
Free Shipping on orders $49 and up
This is an OEM Rein replacement sway bar bushing for a 23mm diameter sway bar. Replace your failed sway bushing to restore optimal handling characteristics.