BMW Performance Intake Kits for BMW E36 (1992-1998) M3

aFe Magnum FORCE Stage-2 Pro 5R Cold Air Intake System - E36 325/328/...

CARB certified for sale in all 50 states

T#:1358

Part#: 54-12392

EO#: D-550-38

Ships on Sep 10, 2026

$ 387.00 USD

Add to Wish List

Qty

$ 387.00 USD

Add to Wish List

E36 325/328/M3 intake with US 3.0" HFM
E36 M3 intake with Euro 3.5" HFM
Maximum Flow Pro5R Filter

This air intake system produces up to 20 horsepower, 25 lbs. x ft. torque and out-flows the factory intake by up to 80%. Included in this system is a washable/reusable conical air filter that uses five layers of oiled cotton gauze filter for maximum performance. This intake system also features a rotomolded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.

5 aFe conical filter: aFe has maximized the space available in the E36 engine compartment to fit the largest available cone filter. For maximum flow and the highest horsepower gain, the Pro 5R oiled cotton gauze filter is used. The Pro 5R is a 5-layer progressive layered, oiled cotton gauze material that allows maximum air flow while trapping dust and dirt. It's a re-useable filter that needs only a shake and rinse to be cleaned and occasional re-oiling. This kit is also available with a maintenance free paper filter.

One-piece precision cut heat shield: The air filter is housed in a one-piece, black powdercoated 1.6mm heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation.

Compatible with most aftermarket HIDs: This system was designed to clear larger style HID headlight housings.

One kit to Fit Both US and Euro HFMs: aFe has re-engineered their systems so that the same kit is used for either the US or Euro HFM. The filter and tubing was optimized for use with the 3.5" HFM and a special adapter was engineered to work with the stock 3.0" HFM. This is a bonus for cars with the stock HFM as they get the larger filter and intake tract!
Note: on cars with a 3.5" HFM an adapter is required to fit the HFM to the stock throttle body boot. Select this from the options below.
If you are removing the factory ASC traction control we recommend getting the Samco Silicone Intake Boot. Select this from the options below.

Please note: If you are planning to use any 3.5" HFM on your E36 M3, be SURE you are using the correct set of injectors and software too.

This item fits the following BMWs:
1992-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1995-1999 E36 BMW M3 with Euro/540 or Porsche 3.5" MAF

Show More Show Less

aFe Throttle Body Spacer - E36 M3

CARB certified for sale in all 50 states

T#:189816

Part#: 46-31004

EO#: D-550-11

In Stock

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

The Silver Bullet throttle body spacer creates turbulence in the air flow just prior to entry into the engine increasing horsepower, torque and improving throttle response. In recent dyno testing by aFe, this throttle body spacer produced +4hp and +8lbs. x ft. torque (measured on E36 M3 with S52 engine) . The Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. Great power per dollar performance.

This item fits the following BMWs:
1995-1999 E36 BMW M3

Show More Show Less

aFe Pre-Filter for aFe Intake Kit # 54-12392

T#:193893

Part#: 28-10103

Ships in 3 Business Days

21% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD

Add to Wish List

Qty

21% off MSRP

$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD

Add to Wish List

Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter�s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005� or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter�s performance�the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-12392 (E36 6 Cylinder)

Show More Show Less

aFe Intake Tube - E36 M3 (for upgraded 3.5 inch HFM) (Retains ASC) ...

For vehicles utilizing a Euro MAF

T#:193549

Part#: 54-12399

Back Ordered

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Our new intake boot for E36 M3 with S52 engine and 3.5" Euro HFM retains the stock ASC option while providing a full diameter tube to connect the HFM to the throttle body. Often the 3.5" HFM is used with the a reducer to fit onto the stock intake boot. This upgraded intake boot does not use the reducer which results in greater air flow to the throttle body.

This upgrade kit retains the ASC throttle body when upgrading to a 3.5" EURO MAF sensor. This coupling upgrade was designed to work with aFe’s P/N: 51-12392 / 54-12392, but it can also be used with other competitors intakes. The coupling is constructed of polyurethane for strength and durability. This engineered coupling upgrade increases air flow and velocity by controlling the air intake dynamics. This is a very simple bolt-on product and requires no cutting or drilling.

This item fits the following BMWs:
1996-1999 E36 BMW M3, M3 convertible

Show More Show Less

aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451 ...

T#:3894

Part#: 28-10093

Ships in 3 Business Days

21% off MSRP $ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD

Add to Wish List

Qty

21% off MSRP

$ 47.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.00 USD

Add to Wish List

Prevent water, mud and sand from congesting your air intake system with the aFe Pre-Filter. This aFe Pre-Filter slips right over your performance air filter, adding an extra layer of defense against moisture, grime and other roadway filth, extending the cleaning interval of your aFe filter. Water is repelled by the proprietary hydrophobic treatment to the Pre-Filter�s polyester fabric, and the pre-filters uniformly spaced micron holes prevent debris .005� or larger from passing through. Best of all, using the Pre-Filter does not significantly diminish your air filter�s performance�the smooth rush of oxygen keeps rolling right into your engine. Visually, the Pre-Filter blends in seamlessly with your aFe Cold Air Intake System and other components under your hood.

This particular pre-filter is custom sized to fit the following aFe Intake Kits:
54-10171 (E36 6 Cylinder)
54-10441 (E46 323i/325i/328i/Ci 99-2003)
54-10451 (E46 330i/Ci (all) & 325i/Ci 2003-2005)

Show More Show Less

Karbonius E36 M3 (Euro S50) Carbon Airbox

T#:34616671

Part#: E36AD01-CF-2

Ships in 3 Business Days

$ 2,449.00 USD

Add to Wish List

Qty

$ 2,449.00 USD

Add to Wish List

Karbonius E36 M3 (Euro S50) Carbon Airbox delivers a high-performance upgrade for BMW enthusiasts looking to boost their E36 M3’s engine response and horsepower. Engineered for the Euro-spec S50 engine, this carbon airbox enhances air intake efficiency, ensuring optimal airflow and a distinctively deep intake sound. Lightweight yet highly durable, the Karbonius airbox is crafted from premium carbon fiber, ensuring longevity and a sleek look under the hood. Available from Turner Motorsport, this airbox upgrade combines style with functional performance for a dynamic driving experience.

Improved Engine Response: Enhances air intake for a more responsive throttle and increased horsepower.
Premium Carbon Fiber Construction: Built from lightweight, durable carbon fiber that withstands heat and offers a refined aesthetic.
Engineered for Euro S50: Specifically designed to fit the BMW E36 M3 Euro-spec S50 engine, ensuring easy installation and compatibility.
Distinct Intake Sound: Produces a rich, deep sound that elevates the driving experience.
Trusted Quality from Turner Motorsport: Available through Turner Motorsport, a respected supplier of performance BMW parts.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Intake Kits for BMW E36 (1992-1998) M3

aFe Magnum FORCE Stage-2 Pro 5R Cold Air Intake System - E36 325/328/...

aFe Throttle Body Spacer - E36 M3

aFe Pre-Filter for aFe Intake Kit # 54-12392

aFe Intake Tube - E36 M3 (for upgraded 3.5 inch HFM) (Retains ASC) ...

aFe Pre-Filter for aFe Intake Kits # 54-10171, 54-10441 & 54-10451 ...

Karbonius E36 M3 (Euro S50) Carbon Airbox

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results