Shock Mount Kits for BMW E36 (1992-1998) M3

Clear BMW chassis

Please ensure your correct model is selected

If you are replacing your shocks, be sure to change the mount as well. This simple step will not only increase the life of your new shocks, but will help to restore lost comfort and agility, As factory bushings age, the will begin to crack and split. Turner Motorsport carries Genuine BMW mounts as well as high quality aftermarket alternatives.

Sub-Categories

Sort By:

KYB - Corporate Logo
T#:5760270
Part#: 31332227898
Ships in 1-2 days
$ 112.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
Show More Show Less
KYB - Corporate Logo
T#:5760249
Part#: 31332227897
In Stock
$ 112.99

This product was last offered at the strikethrough price on
05-07-2026

$ 110.99 USD
Free Shipping
$ 110.99 USD
Free Shipping
The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel. Price is per mount. This is the LEFT side (Driver's) mount.
Show More Show Less
Turner Motorsport - Corporate Logo
T#:338951
Part#: JRDRP
Back Ordered
Starting at $ 39.99 USD
Free Shipping on orders $49 and up
Starting at $ 39.99 USD
Free Shipping on orders $49 and up
The rear mounts in BMW 3 series fail, no matter what year from 1983 to present, that is a weak point of the suspension. Here's the solution. The 3 Series "Repair Shop" Rear Shock Mounts carry a lifetime warranty and will last as long as you own your car. Expect the same comfortable ride you have with factory mounts. These are an inexpensive alternative to expensive factory mounts.

Make this complete by adding the mount gasket and nuts (add the option below).
Show More Show Less

Febi Rear Shock Mount - E30, E36, E46, Z3, Z4
Upgraded, more durable mount from the E46 M3
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:350799
Part#: 33526779670
Ships on Nov 25, 2026
$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
Two required per vehicle

3-series Strut/Shock Mount Kit - E36 M3 96-99
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:338693
Part#: TMS338693
Back Ordered
Sale - Save 4% $ 454.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 438.49 USD
Free Shipping
Sale - Save 4%
$ 454.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 438.49 USD
Free Shipping
This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1996-1999 E36 BMW M3
  • Show More Show Less
    3-series Strut/Shock Mount Kit - E36 M3 95
    10X Entries Into Our F80 M3 Sweepstakes
    Turner Motorsport - Corporate Logo
    T#:338692
    Part#: TMS338692
    Ships on Feb 22, 2027
    $ 1,468.99

    This product was last offered at the strikethrough price on
    04-09-2026

    Starting at $ 1,032.71 USD
    Free Shipping
    Starting at $ 1,032.71 USD
    Free Shipping
    This strut and shock mount package covers the front and rear rubber mounts and bushings commonly replaced during a strut and shock install. While you're installing new front struts and rear shocks these are easily installed - there's no additional labor and special tools are not required. Since these pieces are mostly rubber, they dry up and crack over time. Re-using them lead to problems with fitment or noise, and may have safety issues as well. These mounts and pads are the perfect complement to your new shocks to help restore your car's handling and performance.

    We sell the basic strut and shock mount package, which includes:
  • Front strut mounts (also known as guide support)
  • Front strut reinforcement plates (to prevent cracking and deforming of the front strut towers)
  • Front strut tower paper washer gaskets
  • Front and rear self-locking mounting nuts
  • Rear Lifetime Warranty 'Repair Shop' shock mounts
  • Rear shock mount reinforcements (to prevent cracking of shock towers)
  • Rear shock mount gaskets
    In addition, you can add the front spring pads, front bump stops, front dust boots, rear bump stops, and rear dust boots if needed. But please note that some shocks and coil overs come with all or some of these pieces already. If in doubt, check with your supplier on what is included.

    We offer three varieties of the rear shock mounts - OEM, Repair Shop, and HP alum-rubber. We recommend either the Repair Shop or HP mounts because the stock OEM design has a flaw that can lead to premature failure of the mounts. The Repair Shop and HP mounts use a different design that will last longer and the Repair Shop mounts also have a lifetime warranty!

    This item fits the following BMWs:
    1995 E36 BMW M3
  • Show More Show Less

    OEM Lemforder Rear Axle Shock Mount - E30 E36 E46 Z3
    Upgraded, more durable mount from the E46 M3
    Lemforder - Corporate Logo
    T#:12527
    Part#: 33521092362
    Ships in 4 Business Days
    $ 19.99

    This product was last offered at the strikethrough price on
    08-04-2026

    $ 16.99 USD
    Free Shipping on orders $49 and up
    $ 16.99 USD
    Free Shipping on orders $49 and up

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less