Packaged by Turner BMW Cooling System Parts & Accessories for BMW E36 (1992-1998) M3

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

When it comes time to replace your thermostat, be sure you have everything you need. This kit includes everything you need to replace your thermostat, including the thermostat.

Kit includes:

• Thermostat with gasket
• Thermostat mounting hardware
• 1 liter of coolant

This waterpump fits the following BMWs: 
1992-1999 E36 3 series - 323is, 323ic, 325i, 325is, 325ic, 328i, 328ic, M3 3.0 (S50/US), M3 3.2 (S52) 

Looking to improve your cooling system's performance and add some peace of mind at the same time? Look no further. This kit includes everything you need to add performance, durability and longevity to your cooling system without spending a ton of money. Best of all, the upgrade can be performed by a reasonably competent DIY enthusiast in an afternoon. The team at ECS Tuning supplies their excellent silicone radiator hoses, stainless hose clamps, and aluminum coolant bleed screw for increased durability and heat resistance. Meanwhile, a lower pressure expansion tank cap makes for a less costly "weak link" if the system builds too much pressure, potentially saving you from a costly radiator replacement that could leave you stranded. The kit also includes a gallon of Genuine BMW coolant along with 12 ounces of Red Line Water Wetter, which lowers operating temperatures and protects your cooling system from internal corrosion. All you need is this kit, a few hours of free time, and a gallon of distilled water to keep your E36 cool & running at its best!

Kit Contents:

- ECS Tuning Silicone Radiator Hoses

- ECS Tuning Stainless Steel Hose Clamps

- ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw

- 1.4 Bar Expansion Tank Cap

- Red Line Water Wetter - 12oz

- Genuine BMW Coolant - 1 Gallon

Fits the Following BMWs:

E36 323i 325i 328i M3

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance ECS Tuning Aluminum Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 68*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• ECS Tuning Silicone Coolant Hoses - For increased reliability over the stock rubber hoses
• ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Low Temperature Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased coolant flow and reliability over the stock composite pulley

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3