Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

BMW vehicles are known for their robust performance, but the water pump is a notorious weak spot, often needing replacement every 60,000 miles.

During this service, it's wise to also swap out the thermostat to maintain the efficiency of your vehicle's cooling system. Turner Motorsport simplifies this process with our expertly curated Water Pump & Thermostat Replacement Kit.

This premium kit centers around the renowned EMP Stewart high-performance water pump--a favorite among BMW enthusiasts for its exceptional design. Featuring a stainless steel impeller, this pump enhances coolant flow by 20%. Complementing this is a low-temperature 68°C (154.4°F) Mishimoto thermostat, an upgraded aluminum thermostat housing, and Redline Water Wetter coolant additive. Together, these components make for the ultimate cooling system upgrade for your E36, E39, or Z3!

Looking to improve your cooling system's performance and add some peace of mind at the same time? Look no further. This kit includes everything you need to add performance, durability and longevity to your cooling system without spending a ton of money. Best of all, the upgrade can be performed by a reasonably competent DIY enthusiast in an afternoon. The team at ECS Tuning supplies their excellent silicone radiator hoses, stainless hose clamps, and aluminum coolant bleed screw for increased durability and heat resistance. Meanwhile, a lower pressure expansion tank cap makes for a less costly "weak link" if the system builds too much pressure, potentially saving you from a costly radiator replacement that could leave you stranded. The kit also includes a gallon of Genuine BMW coolant along with 12 ounces of Red Line Water Wetter, which lowers operating temperatures and protects your cooling system from internal corrosion. All you need is this kit, a few hours of free time, and a gallon of distilled water to keep your E36 cool & running at its best!

Kit Contents:

- ECS Tuning Silicone Radiator Hoses

- ECS Tuning Stainless Steel Hose Clamps

- ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw

- 1.4 Bar Expansion Tank Cap

- Red Line Water Wetter - 12oz

- Genuine BMW Coolant - 1 Gallon

Fits the Following BMWs:

E36 323i 325i 328i M3

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This Comprehensive kit is the mid-priced option, including the essentials and an upgraded aluminum thermostat housing that won't crack or break like the brittle plastic housing. 

This kit is best for someone who wants to upgrade their thermostat housing to aluminum, has already upgraded their water pump pulley, and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• Aluminum thermostat housing with gaskets
• Fan delete nut

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

If you plan to drive your BMW aggressively on the track, it is important that you upgrade your cooling system to avoid overheating. To ensure your BMW keeps cool on the track, we have built out our new High Performance Cooling System Upgrade kits. Featured in this kit is everything you will need to redo your cooling system from top to bottom with OEM components, with select stock components swapped out for the high performance alternative! This kit includes a high performance ECS Tuning Aluminum Radiator, for significantly better cooling than the stock radiator and full aluminum construction that won't crack from long term heat cycling, a performance Mishimoto 68*C thermostat, for lower temperature operation and increased cooling of the engine, and a Stewart High Performance Water Pump, for dramatically increased coolant flow at all RPMs. 

Additional items included in this kit:

• ECS Tuning Silicone Coolant Hoses - For increased reliability over the stock rubber hoses
• ECS Tuning Heavy Duty Aluminum Coolant Bleeder Screw
• OEM Expansion Tank, Cap, and Level Sensor
• OEM Belts, Tensioners, and Pulleys
• OEM Low Temperature Auxiliary Fan Switch
• Genuine BMW Hardware for Easy Installation
• ECS Tuning Aluminum Water Pump Pulley - For increased coolant flow and reliability over the stock composite pulley

The fan that attaches to the water pump carries so much rotational mass that it can actually hinder the performance of your engine. To address this, we now offer out line of fan delete kits that replace everything needed to get rid of your fan and fan clutch, without causing cooling issues as a result. This basic kit is the cheapest option, including just the bare essentials to get the job done and get your car running without a fan.

This kit is best for someone who has already upgraded their thermostat housing and/or water pump pulley and has performed regular maintenance on their engine drive belts.

Included in this kit:

• 80* thermostat
• 1 liter of coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch

Fits the following BMWs:
09/1995-1999 E36 BMW 323is/ic 328i/is/ic M3

**This kit is intended to be used with cars that have a functional auxiliary fan (64508364093) or an upgraded electrical fan installed.**

Looking to free up horsepower and upgrade your cooling? Then this Electric Fan Conversion kit is the perfect choice! The fan and clutch that connect to the water pump add additional rotating mass to the drive line. By removing them and converting your system to an electric fan, the engine has to do less work, giving you that extra little bit of power. In this kit we include a lower temperature thermostat, coolant additive, and low temperature fan switch that engages the electric fan at a lower temperature, keeping your engine cool and lowering the drag and unneeded weight from the front end of your BMW.

Included in this kit:

• 80 degree Celsius thermostat
• 1 liter of Genuine BMW coolant
• Water Wetter coolant additive
• Low-temperature coolant temperature sensor/switch
• 16 inch Electric fan 
• Electric fan mounting kit
• Fan controller kit with probe sensor 
• Fan delete nut

Fits the following BMWs:
1992-09/1995 E36 BMW 325i/is/ic 328i/is/ic M3

Mishimoto E36 Aluminum Radiator features -

• All aluminum construction
• More durable and longer lasting than plastic components
• 30% more capacity in the same space
• Excellent fit and finish
• Unbeatable lifetime warranty and accident-forgiveness

Mishimoto radiators address all of the defects of the stock E36 radiator in a well-engineered and price-competitive direct replacement unit. The Mishimoto radiator is an all aluminum design that replaces the factory plastic and aluminum stock radiator. The stock plastic end tanks are notorious for cracking and leaks whereas the Mishimoto has aluminum end tanks that will never fail. Mishimoto can also build 30% more coolant capacity into the a radiator that fits in the original location with no modifications. More coolant volume means the fluid is not heat soaked for as long (less super heated fluid circulating through the engine). For a direct replacement performance radiator, the Mishimoto is hard to beat!

Mishimoto was established in 2003 as a supplier of cooling components for drift and rally cars. Their radiators and intercoolers soon found a strong following in the hyper competitive drift scene where high horsepower and prolonged high revs dictate the need for durable and robust cooling solutions. The catchy Mishimoto name is a combination of the name of the founder's family pet - Mishi - and "moto". All products are designed and tested in the USA using state-of-the-art CAD tools and prototyping and with continuous evolution of product design. Mishimoto is so dedicated to quality that they offer a limited lifetime warranty and accident forgiveness.

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

Universal Oil Cooler Black - 10 Row is engineered to maintain optimal oil temperatures and ensure peak engine performance under various driving conditions. This high-performance oil cooler effectively reduces oil temperatures, preventing a drop in pressure and maintaining proper engine lubrication. Featuring a robust 10-row design, it offers superior cooling efficiency compared to standard coolers.

• Efficient Cooling: The 10-row design enhances cooling capacity to manage high oil temperatures effectively.
• Durable Construction: Black finish provides durability and resistance to environmental factors.
• Optimized Performance: Helps prevent a drop in oil pressure and maintains proper engine lubrication.
• Versatile Fitment: Universal design suitable for various vehicles and applications.
• Compact Size: Overall dimensions of 12.95" x 3.8" x 1.97" and core dimensions of 11" x 2.76" x 1.97" ensure a good fit in most engine bays.

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Introducing Mishimoto's Universal Oil Cooler (19 row with Thermostat)

In pursuit of optimal engine lubrication, even under ideal driving conditions, is paramount for BMW owners. Elevated oil temperatures can compromise oil pressure and hinder efficient lubrication. Turner Motorsport's new oil cooler offers a solution to maintain cool oil temperatures, ensuring your engine functions at its best. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter.

Key Features:

• Effective Heat Dissipation: The oil cooler efficiently dissipates heat, keeping oil temperatures within the optimal range for peak engine performance.
• Comprehensive Kit: This kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, providing everything you need for a seamless installation.
• Precise Temperature Control: Equipped with a thermostat for fine temperature and flow control, ensuring the ideal oil temperature is maintained.
• Proposition 65 Compliant: This product complies with Proposition 65, a California law that ensures product safety.

Elevate your BMW's engine performance and protect it from the effects of elevated oil temperatures. Turner Motorsport has the solution you need.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, see: www.P65Warnings.ca.gov.

Enhance your BMW's performance and protect its engine with this high-quality oil cooler kit

Even under ideal driving conditions, elevated oil temperatures can lead to decreased lubrication efficiency and pressure. With this oil cooler, you can maintain optimal oil temperatures for peak driving performance.

Kit Includes:

• Four feet of stainless braided line for durability
• Adapter fittings for easy installation
• Oil filter sandwich adapter for seamless integration

Specifications:

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN
• Includes Thermostat for precise temperature and flow control

*WARNING: This product may be subject to Proposition 65 regulations in California. For more information, visit www.P65Warnings.ca.gov.