BMW Control Arm Replacements & Upgrades for BMW E36 (1992-1998) M3

Clear BMW chassis

Please ensure your correct model is selected

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

IRP Adjustable Steel Rear Control Arm Pair - E36 E46 Z4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
IRP - Individual Racing Parts - Corporate Logo
T#:401372
Part#: IRPCA-ST
In Stock
$ 233.99 USD
Free Shipping
$ 233.99 USD
Free Shipping

If you are looking for a wider range of camber adjustability in the rear of you car, the IRP Adjustable rear lower control arm is exactly what you need! Built to be much stronger than stock, these rear control arms feature inner monoball bushings and are built of steel, reducing the weight as well. These are perfect for a lowered car or for a track car that needs a greater level of rear adjustment.

Features:

  • Strong Steel Construction
  • Adjustable
  • Painted Yellow For Corrosion Protection
  • Weight Reduction
  • Monoball Inner Mount

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less
Trailing Arm Mono Ball Conversion Kit - E36/E46 M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fall Line - Corporate Logo
T#:5580954
Part#: FLM-E46-1BUNI
Ships in 3 Business Days
$ 408.00 USD
Free Shipping
$ 408.00 USD
Free Shipping
Fall Line’s mono ball spherical bearing conversion kit transforms the rear suspension feel of the E46 and E36 M3. The factory rubber bushing is very large, and is prone to substantial deflection under load, as the M3 is put through its paces. Deflection of the bushing can create unwanted geometry change, steering wobble under braking, and even hysteresis of the thrust arm.
Show More Show Less
IRP Lock Kit Pro Drift Suspension Kit - E36
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
IRP - Individual Racing Parts - Corporate Logo
T#:401479
Part#: IRPDK36-2
Special Order: No Guaranteed ETA
$ 1,567.99 USD
Free Shipping
$ 1,567.99 USD
Free Shipping

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock, are a chromolon tubular system, and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 70 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

*This Pro kit offers reduced weight control arms that help this kit shed 2.9 lbs from the standard kit while still remaining just as strong thanks to their chromolon tubular design.*

Kit features:

  • CNC Laser Cut Components
  • Plug & Play - includes all needed hardware
  • Increase to 70 Degree (or more) steering angle (5 degrees more than standard version)
  • Includes Camber Plates
  • Stiffer offset control arm bushings
  • Roll Center and Bump Steer Correction Plates
  • High Strength chromolon tubular control arms with steel monoball ball joints (2cm wider than standard version)
  • Increased length steering tie rods with steel monoball ball joints
  • DriftAllstar- & EEDC-Tested
  • Total weight of all components included: 12.2kg / 26.9lbs (1.3kg / 2.9lbs lighter that standard version)

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

Show More Show Less

IRP Lock Kit Standard Drift Suspension Kit - E36
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
IRP - Individual Racing Parts - Corporate Logo
T#:401478
Part#: IRPDK36-1
Special Order: No Guaranteed ETA
$ 1,209.99 USD
Free Shipping
$ 1,209.99 USD
Free Shipping

Looking to upgrade your front suspension to increase the strength and your steering angle for the track? IRP has you covered with their BMW Lock Kit. This kit includes new control arms that are stronger than stock and have monoball ball joints, new tie rod ends that feature steel monoball ball joints as well, new offset control arm bushings, fully adjustable camber plates, roll center/bump steer correction plates, and all new hardware. This enables this kit to be fully plug and play, giving you a much more adjustable front suspension, and increases the total amount of steering angle up to 65 degrees.

This kit is perfect for those looking to build a drift car and ensure their suspension is ready to take on the challenge.

Kit features:

  • CNC Laser Cut Components
  • Plug & Play - includes all needed hardware
  • Increase to 65 Degree (or more) steering angle
  • Includes Camber Plates
  • Stiffer offset control arm bushings
  • Roll Center and Bump Steer Correction Plates
  • High strength control arms with steel monoball ball joints
  • Increased length steering tie rods with steel monoball ball joints
  • DriftAllstar- & EEDC-Tested
  • Total weight of all components included: 13.5 kg / 29.8 lbs

Fits the following BMWs:
1992-1999 E36 BMW All Submodels

Show More Show Less