ECS BMW Brakes & Brake Parts for BMW 7 Series E38 (1995-2001)

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

BMW E38 Stainless Steel Brake Lines - Exact-Fit Complete Kit provides superior stopping power and reliability by replacing factory brake lines with high-quality stainless steel lines. ECS brake lines are designed to enhance performance and safety by maintaining consistent brake pressure and improving pedal feel.

Benefits:

Enhanced Performance: Stainless steel brake lines resist expansion under heavy braking, unlike factory rubber lines, ensuring a firmer pedal feel and improved braking performance. Durable Construction: Reinforced with braided stainless steel mesh, these lines offer greater expansion resistance and longevity. Protection: Features a red polymer coating to guard against environmental damage and abrasion. DOT Compliance: Manufactured to meet DOT FMVSS 106 standards, ensuring safety and reliability. Pressure Tested: Each line is burst-tested to 3000 psi, well above the maximum pressure of BMW braking systems (1200 psi).