BMW Suspension Parts for BMW E39 M5 S62 5.0L

BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

For Sedan models without Air Suspension

T#:555861

Part#: I-06-BR

Back Ordered

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

8k Front & 6k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - E39 525i 528i 530i 540i S...

For Sedan models without Air Suspension

T#:568111

Part#: I-06E-BR

Ships on Oct 20, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing DS Series Coilover Kit - E39 525i 528i 530i 540i Sedan ...

For Sedan models without Air Suspension

T#:598258

Part#: I-06-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

BC Racing's new proprietary digressive piston design offers increased damping force at low piston velocities while maintaining a linear damper feel at higher piston velocities. One of the greatest advantages of increased low-speed damping force relates to what the driver feels, e.g., roll, pitch, dive, and quick weight transitions on technical road courses. For The Ultimate In Driver Feel - Choose BC Racing DS Series Coilovers.

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

For Sedan models without Air Suspension

Only Fits Sedan

T#:4319906

Part#: I-06-RM

Back Ordered

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

BC Racing has made a name for themselves in the automotive enthusiast communities by developing adjustable, street-and-track capable coilover kits for over a decade that are not only extremely effective, but also don't brake the bank! The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The RM series feature high quality damping adjustable monotube inverted dampers at the front or front and rear, depending on vehicle. The RM coilovers offer the majority of the features of the BR series but with the additional benefit of the inverted damper unit. Inverting the damper unit brings with it a number of advantages. The large 42mm damper rod and inverted design gives the inverted damper units much greater strength and resistance to side loadings. By reducing flex the RM inverted units lead to more consistent steering geometry resulting in more predictable and responsive handling. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Inverted Mono-Tube Damper Linear Piston And Damping Curve Height Adjustment Independent Of Spring Compression 30-Clicks Of Simultaneous Compression/Rebound Adjustment Front Camber Plates Standard On Applicable Kits Rear Camber Plates Available For Applicable Kits Custom Spring Rates And Swift Spring Compatible Custom Valving Or Valving Paired For Custom Spring Rates 1-Year Warranty Against Manufacturers Defect Fully Rebuildable

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Rear Guide Rod - Left or Right - E39, E60, E63, E65

10X Entries Into Our F80 M3 Sweepstakes

T#:338099

Part#: 33326777424S1

Ships on Nov 25, 2026

Starting at $ 79.99 USD

Add to Wish List

Starting at $ 79.99 USD

Add to Wish List

This rear guide rod for the E39 chassis helps to control the toe alignment of the car (the horizontal in/out angle of the tire). There is a rubber bushing on the inside and a ball joint on the outside mounting point. When the bushings on the arm wear out they can contribute to a 'wandering' or 'loose' or unstable feeling in the rear. There may also be a clunking noise associated with bumps. This arm is just one part of the rear suspension, and other parts should be checked to confirm which one is causing the issues. For a complete overhaul of the rear suspension, check out our rear control arm package here .

Brand: Febi-Bilstein, Meyle
Price is for each - order 2 to replace both on the car.
This item fits the following BMWs:
12/2001-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
2002-10/2006 E65 BMW 745i 745li 750i 750li 760i 760li

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5 With Mono...

10X Entries Into Our F80 M3 Sweepstakes

T#:5802187

Part#: T31121092609BKT

Back Ordered

Sale - Save 3% $ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,140.24 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,171.99

This product was last offered at the strikethrough price on
03-09-2026

$ 1,140.24 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension. This Level 2 kit replaces: Control Arms Front Thrust Arms with mono-ball bushings installed Bushings Hardware Outer Tie Rods Stabilizer End Links

Show More Show Less

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5

10X Entries Into Our F80 M3 Sweepstakes

T#:582851

Part#: T31121092609KT

Back Ordered

Sale - Save 6% $ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 677.54 USD

Add to Wish List

Qty

Sale - Save 6%

$ 719.99

This product was last offered at the strikethrough price on
06-08-2026

$ 677.54 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise free suspension.

This Level 2 kit replaces:

Control Arms
Bushings
Hardware
Outer Tie Rods
Stabilizer End Links

Show More Show Less

Turner Front Suspension Refresh Kit - Level 1 - E39 540i M5

10X Entries Into Our F80 M3 Sweepstakes

T#:582863

Part#: T31121092609KT2

Ships in 1 Business Day

$ 565.99

This product was last offered at the strikethrough price on
06-08-2026

$ 523.99 USD

Add to Wish List

Qty

$ 523.99 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Front Control Arms - Curved & Straight
All New Hardware

Show More Show Less

Cup Kit/Coilover Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:16175687

Part#: 31331091708-KT

Ships in 2 Business Days

Sale - Save 1% $ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD

Add to Wish List

Qty

Sale - Save 1%

$ 586.99

This product was last offered at the strikethrough price on
05-03-2026

$ 578.28 USD

Add to Wish List

If you are looking to install a cup kit or a set of coilovers on your BMW, this kit will be a great aid in doing so. It includes everything you will need to do the job, so you can admire your work sooner. See kit contents tab for a list of included components.

Show More Show Less

5-series Strut/Shock Mount Kit - E39 540i/M5 with Performance Shocks/...

10X Entries Into Our F80 M3 Sweepstakes

T#:182513

Part#: TMS182513

Back Ordered

Sale - Save 6% $ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 718.48 USD

Add to Wish List

Qty

Sale - Save 6%

$ 765.58

This product was last offered at the strikethrough price on
06-26-2026

$ 718.48 USD

Add to Wish List

Part of maintaining the precision and crisp handling of your BMW is with refreshing the shock mounts from time to time. The rubber parts that mount the front struts and rear shocks to the chassis suffer from age and mileage just like any other rubber part on the car. Over time they become weak and sloppy and that leads to poor ride characteristics, alignment issues, poor steering feedback and the associated clunks and other noises.

This set of stock mounts replaces the original worn-out shock mounts, bushings, bearings, bump stops, and pads on your existing suspension. We have built this package specifically for use with an aftermarket performance suspension such as our Bilstein/H&R package or other similar performance shocks and springs. This makes a great package when upgrading the non-sport package as the original standard mounts and bushings were not designed for the sport/performance suspension. Installing new mounts with new struts and shocks will ensure proper performance and avoid doing the labor twice if a used mount fails soon after. These are all factory BMW or OEM parts so they fit right and perform just like the factory original parts.

Included in our E39 mount kit is:

front strut bearing dust cap

front strut mount

front upper cupped washer (lower dust cap)

flat washer

front upper spring plate

front upper spring pad

front lower spring pad

rear upper cupped washer

rear shock mount

rear upper spring pad

rear lower cupped washer

rear bump stop

rear lower spring pad note: front bump stops are not included in this package because our Bilstein/H&R suspension includes its own internal bump stops

You save $$ when buying all of these parts as a package!!

Note for 1997-1999 528i, 540i: BMW had a factory recall to replace the front struts and lower spring perches on pre-2000 528i and 540i models. The lower spring perch was redesigned to be stronger and our mount kits cover front struts that have already been replaced under this recall. If yours has not been done we strongly recommend contacting your BMW dealer and having the recall and replacement parts installed. This does not apply to most aftermarket struts, including Bilstein, as their spring perch incorporates the new design.

This item fits the following BMWs:
1997-2003 E39 BMW 540 M5i
with suitable aftermarket sports or performance shocks and springs, H&R, Dinan, Eibach, etc

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (w/o EDC ...

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (12/2001 +)

T#:583049

Part#: T33326767748KT3

Ships on Sep 16, 2026

Sale - Save 4% $ 702.18

This product was last offered at the strikethrough price on
07-09-2026

$ 677.21 USD

Add to Wish List

Qty

Sale - Save 4%

$ 702.18

This product was last offered at the strikethrough price on
07-09-2026

$ 677.21 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Upper Control Arm
Rear Ball Joints
Shock Mounts
Hardware

Show More Show Less

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (Sedan w/...

10X Entries Into Our F80 M3 Sweepstakes
For vehicles without EDC (Up to 12/2001)

T#:583019

Part#: T33326767748KT

Ships in 4 Business Days

Sale - Save 4% $ 671.99

This product was last offered at the strikethrough price on
04-23-2026

$ 646.17 USD

Add to Wish List

Qty

Sale - Save 4%

$ 671.99

This product was last offered at the strikethrough price on
04-23-2026

$ 646.17 USD

Add to Wish List

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Rear Control Arms
Rear Control Arm Bushings
Rear Ball Joints
Rear Strut Mount
New Hardware

Show More Show Less

Lemforder Front Curved Control Arm - Left And Right

10X Entries Into Our F80 M3 Sweepstakes

T#:56110328

Part#: 31121092609/1KT2

In Stock

$ 367.99 USD

Add to Wish List

Qty

$ 367.99 USD

Add to Wish List

This replacement kit includes both left and right front curved control arms manufactured by Lemförder, the exact supplier BMW uses on the assembly line.

Dinan/Bilstein Sport Cup Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:56291014

Part#: E39M5-DINBILKT2

Ships in 7 Business Days

$ 1,277.95 USD

Add to Wish List

Qty

$ 1,277.95 USD

Add to Wish List

While Dinan opts for custom valved Konis in their S1 package, some prefer pairing Dinan’s lowering springs with Bilstein B8 Performance Plus dampers. You get superior gas pressure handling, monolithic Bilstein build quality, and incredible street compliance all while saving over $800 compared to the full Koni equipped Dinan kit.

Show More Show Less

Front Suspension Refresh Kit - Level 2

10X Entries Into Our F80 M3 Sweepstakes

T#:15710798

Part#: 32211091723-KT

Back Ordered

Sale - Save 7% $ 642.99

This product was last offered at the strikethrough price on
03-09-2026

$ 599.40 USD

Add to Wish List

Qty

Sale - Save 7%

$ 642.99

This product was last offered at the strikethrough price on
03-09-2026

$ 599.40 USD

Add to Wish List

Symptoms include a loose and imprecise feel to the steering, as well as excessive shaking and vibration through the steering that increases with speed and braking. Individuals may also experience squeaking, whining or grinding from the front when turning at slow speeds. Other symptoms include a knocking or "clunking" in the front over rough road related to the sway bar bushings and upper strut mounts. With the proper tools, replacement of these components will take approximately 1 day.

Show More Show Less

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

10X Entries Into Our F80 M3 Sweepstakes

T#:580366

Part#: B8800042

Ships on Feb 1, 2027

Sale - Save 15% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Qty

Sale - Save 15%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 39.94 USD

Add to Wish List

Use this tool to separate control arm ball-joints and larger tie-rod end joints. This tool is particularly beneficial when dealing with tight locations that prevent the use of non-scissor separator tools. Note that max jaw opening is 1 3/4".

Show More Show Less

Bav Auto Shock and Strut Nut Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580394

Part#: B8800081

In Stock

Sale - Save 5% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 117.79 USD

Add to Wish List

Used to install or remove shock and strut nuts - no more using an impact gun!

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

10X Entries Into Our F80 M3 Sweepstakes
Be sure to add some grease to the rods in this tool set during installation to prevent breakage.

T#:580442

Part#: B8800137

In Stock

Sale - Save 3% $ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Qty

Sale - Save 3%

$ 293.99

This product was last offered at the strikethrough price on
05-03-2026

$ 285.17 USD

Add to Wish List

Remove and install the two rear inner trailing arm / lower control arm bushings that are in the subframe with one tool set without removing the trailing arms from the vehicle. This tool is designed to work with all trailing arm bushing designs on E82, E84, E90 ,E91, E92, E93 model cars. Replaces bushing part #'s 33326770829 and 33326763092.

Show More Show Less

BMW Bav Auto Rear Ball Joint Press

10X Entries Into Our F80 M3 Sweepstakes

T#:580356

Part#: B8800028

In Stock

Sale - Save 3% $ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Qty

Sale - Save 3%

$ 130.99

This product was last offered at the strikethrough price on
06-10-2026

$ 127.06 USD

Add to Wish List

Allows for removal / replacement of lower rear ball joint, enabling you to get this job done at home, saving you time and money on labor.

Bav Auto Upper Spring Compressor Jaw - E39/E46

10X Entries Into Our F80 M3 Sweepstakes

T#:580380

Part#: B8800062

In Stock

Sale - Save 12% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

Qty

Sale - Save 12%

$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 64.22 USD

Add to Wish List

This upper spring compressor jaw is specifically for E39 and E46 springs, for use with Bav Auto spring compressors.

Bav Auto 9-Way Slide Hammer Puller Set

10X Entries Into Our F80 M3 Sweepstakes

T#:580405

Part#: B8800095

Ships in 1 Business Day

Sale - Save 5% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

Qty

Sale - Save 5%

$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.74 USD

Add to Wish List

A complete slide hammer kit for your next suspension job.

Bav Auto Rear Ball Joint Tool

10X Entries Into Our F80 M3 Sweepstakes

T#:580371

Part#: B8800049

Ships on Oct 19, 2026

Sale - Save 5% $ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

Qty

Sale - Save 5%

$ 81.99

This product was last offered at the strikethrough price on
06-10-2026

$ 77.89 USD

Add to Wish List

This ball joint press is designed make removal of your old ball joints as painless as possible. Adapts the size of the balljoint and forces it out when using a ratchet.

Bav Auto 23mm Tie Rod Puller

10X Entries Into Our F80 M3 Sweepstakes

T#:580451

Part#: B8800146

In Stock

Sale - Save 40% $ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Qty

Sale - Save 40%

$ 46.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.40 USD

Add to Wish List

Will not tear tie rod boots, which can lead to premature failure of the tie rod assembly.

Control Arm Bushing Remover & Installer - Bavarian Autosport ...

10X Entries Into Our F80 M3 Sweepstakes
Designed for use with 65mm bushings

T#:580391

Part#: B8800078

Ships on Oct 19, 2026

Sale - Save 10% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 98.99 USD

Add to Wish List

Don't struggle with hammers and improper techniques, drive your bushings out easily with this control arm bushing remover and installer.

Bav Auto Tie-rod and Upper/Lower Control Arm Ball Joint Puller - E39 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:580406

Part#: B8800096

Special Order: No Guaranteed ETA

Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

Qty

Sale - Save 10%

$ 69.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.99 USD

Add to Wish List

This puller is perfect for removing all tie-rod ends and ball joints on the front suspension of all E39 5 Series cars 1997-2003.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

16mm / 18mm Thin Wrench - For Use On Swaybar End Links - Bavarian Aut...

10X Entries Into Our F80 M3 Sweepstakes

T#:580331

Part#: B8300001

In Stock

Sale - Save 3% $ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

Qty

Sale - Save 3%

$ 9.99

This product was last offered at the strikethrough price on
05-03-2026

$ 9.65 USD

Add to Wish List

Bav Auto Spindle Housing Spreader Tool - 1/2" Drive

10X Entries Into Our F80 M3 Sweepstakes

T#:580424

Part#: B8800117

In Stock

Sale - Save 25% $ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 20.99

This product was last offered at the strikethrough price on
05-03-2026

$ 15.74 USD

Add to Wish List

Used to separate steering knuckle from your shock/strut easily, no need to use a chisel and hammer now!

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW E39 M5 S62 5.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

BC Racing BR Series Extreme Low Coilovers - E39 525i 528i 530i 540i S...

BC Racing DS Series Coilover Kit - E39 525i 528i 530i 540i Sedan ...

BC Racing RM Series Coilover Suspension Kit - E39 525i 528i 530i 540i...

BC Racing Rear Damping Adjustment Extenders - BR Type

Rear Guide Rod - Left or Right - E39, E60, E63, E65

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5 With Mono...

Turner Front Suspension Refresh Kit - Level 2 - E39 540i M5

Turner Front Suspension Refresh Kit - Level 1 - E39 540i M5

Cup Kit/Coilover Installation Kit

5-series Strut/Shock Mount Kit - E39 540i/M5 with Performance Shocks/...

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (w/o EDC ...

Turner Rear Suspension Refresh Kit - Level 1 - E39 540i, M5 (Sedan w/...

Lemforder Front Curved Control Arm - Left And Right

Dinan/Bilstein Sport Cup Kit

Front Suspension Refresh Kit - Level 2

Bav Auto Scissor Type Ball Joint / Tie Rod Separator

Bav Auto Shock and Strut Nut Tool

Bav Auto Trailing Arm Inner Bushing Tool - Master Set

BMW Bav Auto Rear Ball Joint Press

Bav Auto Upper Spring Compressor Jaw - E39/E46

Bav Auto 9-Way Slide Hammer Puller Set

Bav Auto Rear Ball Joint Tool

Bav Auto 23mm Tie Rod Puller

Control Arm Bushing Remover & Installer - Bavarian Autosport ...

Bav Auto Tie-rod and Upper/Lower Control Arm Ball Joint Puller - E39 ...

16mm / 18mm Thin Wrench - For Use On Swaybar End Links - Bavarian Aut...

Bav Auto Spindle Housing Spreader Tool - 1/2" Drive

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results