Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
Enhance your BMW or MINI lifting experience with the Powerflex BMW & MINI jack pad adapter. Specifically crafted to snugly fit into the plastic lifting points of your vehicle, this adapter ensures lift stability while safeguarding the underside. Experience a secure and safe jack point, with added height to protect against rocker panel contact. A valuable addition for anyone using a floor jack to maintain their BMW or MINI.
This part replaces OEM Part Numbers: 51717039760, 51717123311, and 51718268885
Only with jack pad retrofit kit: Countryman / Paceman
Upgrade the shifting precision and feel of your BMW with Turner Motorsport Powerflex Shifter Carrier Street Bushings - Oval. Made of 90A urethane, these bushings replace the stock rubber ones to prevent sloppy shifting. The stiff urethane reduces play without adding vibration. Easy to install when the carrier is out of the car, these bushings ensure improved performance. Here are the key benefits:
The BMW Shifter Carrier Arm Bushings - Oval are essential components designed to support and stabilize the shifter assembly in various BMW models. These bushings ensure a firm and accurate connection between the shifter carrier arm and the vehicle chassis, resulting in smoother, more precise gear shifts.
Oval Design for Stability:
Enhanced Shifting Accuracy:
Durable and Long-Lasting:
Improved Driving Experience:
Easy Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Oval are a crucial upgrade for drivers looking to improve the performance and feel of their shifter. With enhanced durability, improved shifting precision, and a better driving experience, these bushings are a valuable investment for any BMW enthusiast.
BMW E36 E46 Powerflex Clutch Fork Pivot Pin - Street offers enhanced performance and reliability for BMW enthusiasts. Engineered by Powerflex, this clutch fork pivot pin is designed to improve the feel and response of the clutch system, providing a more direct and consistent engagement.
Installation Note: Designed for street use and compatible with standard clutch systems.
The BMW Shifter Carrier Arm Bushings - Round are crucial components designed to enhance the performance and functionality of the shifter assembly in various BMW models. These bushings provide critical support for the shifter carrier arm, improving the overall shifting experience and driving dynamics.
High-Quality Material:
Enhanced Shifting Precision:
Improved Shift Quality:
Simple Installation:
Wide Compatibility:
In summary, the BMW Shifter Carrier Arm Bushings - Round are essential for enhancing the performance and feel of the shifter in various BMW models. By improving shifting precision and overall driving dynamics, these bushings are a valuable addition for any BMW owner looking to elevate their driving experience.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.
Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The BMW E39 540, M5 (1996 - 2004) Front Inner Track Control Arm Bushing is a vital component in the suspension system, providing stability and precision to the front control arms. Designed to withstand the rigors of daily driving and performance demands, this bushing helps maintain optimal alignment, handling, and overall ride quality in the high-performance E39 540i and M5 models.
High-Quality Material:
Enhanced Suspension Performance:
Minimized Vibration and Noise:
Improved Steering Response:
Direct Fit for Easy Installation:
Polyurethane Upgrade for Performance Enthusiasts:
In conclusion, the BMW E39 540, M5 Front Inner Track Control Arm Bushing is a crucial part of the suspension system, responsible for maintaining alignment and handling dynamics. Whether you’re replacing worn bushings or upgrading to polyurethane for enhanced performance, this component ensures that your BMW E39 540i or M5 delivers the precision and comfort it was designed for.
This 27mm sway bar bushing is ideal for enthusiasts looking to improve the handling characteristics of their BMW, offering a durable, performance-focused upgrade that enhances vehicle control without compromising daily driving comfort.
The Powerflex Rear Differential Rear Mount Bushings for the BMW E39 5 Series are designed to provide a significant upgrade to the vehicle's rear differential system by replacing the stock rubber bushings with high-performance polyurethane. This enhancement leads to improved handling, stability, and durability.
Enhanced Differential Control: The stiffer polyurethane material reduces unwanted movement and flex in the differential mount, ensuring better alignment and stability under load. This translates to improved power delivery and handling during cornering and acceleration.
Increased Longevity: These bushings are crafted to resist wear and degradation from oil, heat, and road debris, offering superior durability compared to traditional rubber bushings. This longevity ensures that the performance benefits are maintained over time.
Improved Driver Feedback: By minimizing movement in the rear differential, these bushings enhance the connection between the vehicle and the driver. This results in better feedback and control, allowing for a more engaging driving experience.
Direct Fit for Easy Installation: Designed specifically for the E39 5 Series, these bushings fit directly into the existing differential mounts, facilitating a hassle-free installation process without the need for modifications.
This upgrade is perfect for BMW E39 5 Series enthusiasts who want to improve their vehicle's handling and performance, making it suitable for both daily driving and spirited performance applications. The Powerflex Rear Differential Rear Mount Bushings provide a reliable solution to enhance the overall effectiveness of the rear suspension system.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex BMW E39 5 Series Rear Lower Arm Front Bushing is designed to improve the performance and durability of the suspension system by replacing the factory-installed rubber bushings with high-performance polyurethane. This bushing fits into the front position of the rear lower control arm, offering enhanced handling and stability for the BMW E39 5 Series.
This Rear Lower Arm Front Bushing is an ideal choice for BMW E39 5 Series owners looking to enhance their car’s handling and stability. It delivers improved control and a more responsive driving experience, all while retaining the comfort expected from the E39. Perfect for daily use and performance applications alike, it provides a robust solution for better suspension performance and long-term durability.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.
By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components.
Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.
Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.
The Powerflex BMW E24 / E28 / E32 / E34 / E36 / E39 / E46 / Z3 Rear Sway Bar Bushing – 15 mm is a specialized suspension upgrade designed to improve the performance of your BMW’s rear sway bar system. Engineered for BMW models with a 15 mm rear sway bar, this bushing provides a perfect fit and superior handling.
These 15 mm Rear Sway Bar Bushings are ideal for BMW enthusiasts looking to upgrade their car’s handling dynamics. Whether you're driving a classic BMW like the E24 or a modern model like the E46, these bushings provide a straightforward way to enhance your vehicle's suspension, offering improved cornering precision and reduced body roll, while still preserving ride comfort for everyday use.
The Powerflex Rear Sway Bar Bushing - 18.5 mm Street for the BMW X3 (2003-2010) is a premium suspension upgrade designed to replace the factory rubber bushings with high-performance polyurethane. This bushing specifically fits rear sway bars with a 18.5 mm diameter, providing better durability and handling for street-focused driving.
The Powerflex Rear Diff Front Mount Bushing - Flat Type for the BMW E38 7 Series and E39 5 Series is a premium suspension component designed to replace the factory rubber bushing in the front mount position of the rear differential. This high-performance polyurethane bushing is engineered to enhance drivetrain stability and improve overall vehicle performance, making it an ideal upgrade for drivers seeking longevity and sharper handling.
Flat-Type Design: This bushing is built with a flat-type design, which ensures a direct replacement fit for the factory-installed bushing in the front mount of the rear differential. It aligns perfectly with the BMW E38 and E39 chassis, providing an accurate and secure fit without the need for modifications.
Polyurethane Material: Powerflex bushings are constructed from high-quality polyurethane, which offers superior durability compared to traditional rubber. This material is highly resistant to wear, heat, and degradation from oils and road contaminants, ensuring that the bushing remains effective for a much longer period under both normal and performance driving conditions.
Enhanced Drivetrain Control: The rear diff front mount bushing plays a critical role in controlling the movement of the rear differential during acceleration, deceleration, and cornering. Powerflex's polyurethane bushing limits excessive movement and reduces drivetrain flex, leading to more consistent power delivery, reduced differential "clunking," and a smoother, more precise ride.
Improved Handling: By stiffening the front mount of the rear differential, this bushing enhances the stability and control of the rear suspension, particularly during aggressive driving. Drivers will notice a reduction in body movement and improved handling characteristics, allowing for more confident cornering and better overall vehicle dynamics.
Direct Replacement for OEM Bushings: Designed to replace the original rubber bushing without any additional modifications, this bushing fits seamlessly into the existing suspension setup of the BMW E38 7 Series and E39 5 Series. Installation is straightforward, and the bushing is engineered to match the factory specifications while offering a significant performance upgrade.
Long-Lasting Durability: Polyurethane bushings are designed to withstand harsh conditions and prolonged use, far outlasting the OEM rubber components. This bushing resists cracking, warping, and deterioration over time, ensuring that it maintains its structural integrity and performance even after years of use.
For BMW E38 7 Series and E39 5 Series owners looking for a reliable, long-lasting upgrade, the Powerflex Rear Diff Front Mount Bushing - Flat Type delivers improved handling, enhanced drivetrain control, and a more responsive driving experience. This is a vital upgrade for maintaining the performance and reliability of your rear suspension system.
Powerflex Front Sway Bar Bushing (24mm) designed for the BMW E38 7 Series and E39 5 Series:
These bushings are perfect for those wanting to upgrade their suspension setup for better handling and longevity.
The Powerflex Front Sway Bar Bushing for the BMW E24, E28, E39, and Z3 models, specifically designed for a 14mm sway bar, is a performance-enhancing upgrade that significantly improves the vehicle's handling characteristics. By replacing the stock rubber bushings with high-performance polyurethane, this product provides a range of benefits that enhance both driving experience and suspension performance.
Enhanced Cornering Stability: The firmer polyurethane material of the bushing reduces unwanted flex in the sway bar, which minimizes body roll during cornering. This results in improved stability and traction, allowing for sharper handling and more confident navigation of curves.
Increased Durability: Unlike standard rubber bushings that can deteriorate over time due to environmental factors, Powerflex bushings are designed to resist wear and tear from heat, oil, and road debris. This durability ensures consistent performance and longevity, making them a reliable choice for both daily driving and performance applications.
Better Steering Feedback: The stiffer design improves the connection between the sway bar and the chassis, enhancing steering response and feedback. Drivers will experience a more connected feel to the road, leading to better control and an overall more engaging driving experience.
Simple Installation Process: Tailored specifically for the E24, E28, E39, and Z3 with a 14mm sway bar, these bushings are a direct replacement for the original components. The installation is straightforward, requiring no modifications, which makes it an easy upgrade for both DIY mechanics and professionals.
Versatile Performance: Whether for everyday use, spirited driving, or track applications, these bushings help optimize the vehicle's suspension setup. They improve overall handling dynamics and enhance tire contact with the road, resulting in a more responsive and stable driving experience.
This upgrade is perfect for BMW E24, E28, E39, and Z3 owners looking to enhance their vehicle's suspension performance. The Powerflex Front Sway Bar Bushing for the 14mm sway bar provides a solid solution for improving handling, stability, and overall driving enjoyment, making it an excellent choice for automotive enthusiasts seeking to elevate their driving experience.
The Powerflex Non-M Rear Lower Arm Rear Bushing for the BMW E39 5 Series, specifically designed for a 12mm fitting, is an excellent performance enhancement for the vehicle's rear suspension system. By replacing the factory rubber bushings with high-performance polyurethane, this bushing offers numerous advantages for improved handling and stability.
Enhanced Suspension Performance: The stiffer polyurethane material reduces flex and unwanted movement in the rear lower arm, resulting in improved handling characteristics. This upgrade enhances cornering stability, allowing for more confident driving, especially in dynamic situations.
Long-lasting Durability: Unlike factory rubber bushings, which can deteriorate over time, these polyurethane bushings are engineered to withstand extreme conditions. They resist wear from oil, heat, and road debris, ensuring long-lasting performance and reliability.
Improved Driver Feedback: The firmer bushing design allows for better road feel and steering response, giving drivers a more connected experience with the vehicle. This leads to enhanced control during cornering and a more engaging driving experience.
Simple Installation: Designed for a direct fit into the BMW E39 5 Series lower arm, these bushings require no modifications for installation. This ease of fitment makes it a straightforward upgrade for enthusiasts and DIYers alike.
Versatile Use: Whether for daily driving or spirited performance applications, these bushings help optimize the rear suspension setup, improving tire contact with the road and enhancing overall performance.
This upgrade is ideal for BMW E39 5 Series owners who want to enhance their vehicle's handling capabilities and stability. The Powerflex Non-M Rear Lower Arm Rear Bushing is a reliable choice for improving the performance of the rear suspension system, making it suitable for various driving conditions and styles.
The Powerflex Rear Lower Arm Rear Bushing for the BMW E60 5 Series, E63 6 Series, E53 X5, and E39 5 Series, designed for a 14mm fitting, is a performance-oriented upgrade that enhances the functionality of the rear suspension system. By replacing the stock rubber bushings with high-quality polyurethane, this bushing offers multiple advantages for improved handling and stability.
Improved Handling Dynamics: The firmer polyurethane construction reduces flex and unwanted movement in the rear lower arm, resulting in enhanced cornering stability and overall handling. This upgrade helps drivers feel more in control during aggressive driving and tight turns.
Superior Durability: Unlike traditional rubber bushings that can wear out and degrade over time, Powerflex bushings are designed to withstand harsh conditions. They resist damage from oil, heat, and road debris, ensuring consistent performance and longevity.
Enhanced Steering Feedback: By minimizing unwanted movement within the rear suspension, these bushings provide better road feedback and improved steering response. This results in a more connected and engaging driving experience, allowing drivers to feel more attuned to their vehicle.
Easy Installation: Specifically designed for the E60, E63, E53, and E39 models, these bushings are a direct fit into the existing suspension components. The installation process is straightforward, requiring no modifications and making it an ideal upgrade for DIY enthusiasts.
Versatile Performance: Whether for daily driving or performance-oriented applications, these bushings help optimize the rear suspension geometry, enhancing tire contact with the road and improving handling capabilities in various driving conditions.
This upgrade is ideal for BMW owners looking to enhance their vehicle's rear suspension performance. The Powerflex Rear Lower Arm Rear Bushing for the 14mm fitting is a reliable solution for improving handling, stability, and overall driving enjoyment, making it suitable for both everyday use and spirited driving scenarios.
The Powerflex Rear Subframe Mount Front Insert for the BMW E39 5 Series is engineered to improve the rigidity and responsiveness of the rear suspension system. By replacing the factory rubber with high-quality polyurethane, this insert enhances the overall performance and durability of the subframe mount.
Ideal for BMW enthusiasts looking to elevate their E39 5 Series's handling and performance, this insert provides a reliable solution for enhancing the rear suspension system's effectiveness, suitable for both daily use and performance-oriented driving.
The Powerflex Rear Subframe Rear Mount Insert for the BMW E39 5 Series is specifically designed to enhance the performance and stability of the rear suspension system. By utilizing high-quality polyurethane, this insert significantly improves the rigidity of the rear subframe, offering a range of benefits for driving enthusiasts.
Enhanced Handling Performance: The insert reduces flex in the rear subframe mount, resulting in improved stability during cornering. This enhancement leads to better handling characteristics, allowing for more precise control and confidence when navigating turns.
Durability and Longevity: Constructed from resilient polyurethane, these inserts are designed to withstand harsh driving conditions and resist wear from oil, heat, and environmental factors. This durability ensures they maintain performance over a longer period compared to traditional rubber mounts.
Improved Road Feel: By minimizing unwanted movement in the subframe, these inserts provide enhanced feedback to the driver, allowing for a more connected and engaging driving experience. This is particularly beneficial for spirited driving and performance applications.
Straightforward Installation: Designed for a direct fit into the existing rear subframe mounts of the E39 5 Series, these inserts allow for easy installation without the need for modifications or extensive labor.
Ideal for BMW enthusiasts looking to upgrade their E39 5 Series's suspension system, these inserts deliver improved handling and responsiveness, making them suitable for both everyday driving and high-performance scenarios.
Overview: Powerflex front sway bar bushings are designed to enhance handling and stability in your BMW E38 (1994-2002) and E39 (1997-2003) with a 22.5 mm sway bar. Made from high-quality polyurethane, these bushings offer superior durability and performance compared to OEM rubber.
Key Features:
Installation: Simple installation process using basic hand tools, with clear instructions included.
Upgrade your BMW E38 or E39 with Powerflex sway bar bushings for improved handling and a more engaging driving experience.
These 25mm sway bar bushings are a great upgrade for drivers looking to improve their BMW's cornering performance and overall handling, especially in demanding driving conditions.