Bilstein BMW Coilovers for BMW 5 Series E39 (1996-2003)

Clear BMW chassis

Please ensure your correct model is selected

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

Bilstein PSS9 Coil-Over Suspension - E39 540i, M5
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:344023
Part#: 48-104555
In Stock
$ 2,199.00 USD
Free Shipping
$ 2,199.00 USD
Free Shipping
The B16 PSS9 coil-overs offer a stiffer spring rate than stock and a lower ride height for less body roll and better handling. These are among the easiest coil over kits on the market - no special mounts required (works with stock mounts and sway bar links), larger adjustment knob allows for easy shock damping changes, and coil-over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!
Show More Show Less
Bilstein B14 PSS Coil-Over Suspension - E39 540i M5 - (NO LONGER AVAI...
For sedan models only '00-'03
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:341218
Part#: 47-111264
In Stock
$ 1,289.00 USD
$ 1,289.00 USD
The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
Show More Show Less
Bilstein B14 PSS Coil-Over Suspension - E39 528i 525i 530i
For vehicles without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R For sedan models without EDC. Average lowering of 1.4-2.0"F 0.8-2.0"R
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:344121
Part#: 47-100763
In Stock
$ 1,289.00 USD
Free Shipping
$ 1,289.00 USD
Free Shipping

The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
The product benefits at a glance:

  • Threaded body adjustable range of 20 mm
  • Lowering of approx. 30-50 mm at front and rear
  • Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
  • Aluminum Spring plates and lock nuts
  • Surface coating using Triple-C-Technology for long-lasting corrosion resistance
  • Round threads for easy adjustment
  • Quality sport springs made from highly durable material
  • Gas pressure technology

BILSTEIN monotube technology, made in Germany

adj. -1.0"-1.75" / adj. -1.0"-1.75"

Not for cars with EDC

Fits these vehicles:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

E39 540i/M5 Bilstein PSS Coil-Over Suspension
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:338924
Part#: HE5-B126-H3
In Stock
Starting at $ 1,289.00 USD
Free Shipping
Starting at $ 1,289.00 USD
Free Shipping
Bilstein's PSS coil over system for the E39 540/M5 combines the best features of the adjustable PSS9 but with fixed dampening rates and a lower price. The PSS kit features height-adjustable springs paired with performance-tuned monotube shock absorbers. It's better than the standard sport shock/spring package thanks to its adjustable ride height and matched shock and spring rates. With a lower ride height and stiffer springs you get less bodyroll and better handling. These are the most user-friendly coil over kits on the market - no special mounts required (works with stock 540/M5 mounts) and coil over spanner wrenches included for easy height changes. Bilstein backs up their technology with a limited lifetime warranty. TUV approved for fitment, safety, and quality!

PSS fixed monotube shocks are matched to the progressive-rate springs and tuned for performance. The PSS does not have the adjustable shock settings like the PSS9. Instead the damping is set at a performance level. Bilstein features a monotube shock design in this kit - one large shock piston instead of two smaller pistons. The larger piston is better at dissipating heat and controlling small shock movements. The rest of the shock is identical to the more expensive PSS9 - zinc coated shock bodies, aluminum spring seats and lock collars, fine rounded threads for precise height adjustments, and tuned progressive-rate springs.

The PSS is height adjustable! Ride height adjustments are done from perches on the bottom of each spring. You can set the ride height between 1.0 to 2.0 inches lower than stock ride height. On the E39 we recommend a front to rear rake of .75" (higher rear). Bilstein uses progressive-rate springs to keep the ride smooth yet sporty. Overall, the PSS springs are stiffer than other coil over kits and the results of Bilstein's extensive testing on the German Nurgburgring and Autobahn. Rear shocks are also coil over, just like the factory shocks. The struts are zinc coated for excellent wear and corrosion resistance.

The fitment of these is just like a standard shock and spring package. The front struts and rear shocks are compatible with the stock mounts. On the front, Bilstein has an ingenious upper spring perch that allows you to retain the stock spring radial bearing. We recommend getting new front upper bearings. Using the stock mounts keeps the cost and complexity down and allows for TUV certification. You can also be assured of the stock mount's quiet and long-lasting performance. The assembly of the front strut is the same as the factory strut, except you use the Bilstein upper spring perch in place of the stock perch. A OEM mount kit or adjustable camber plates are also available. Install instructions and diagrams included.

If you're looking for a supremely capable and high quality suspension, then look no further than the Bilstein PSS. It combines all of the best German engineering with real-world development, and a lifetime warranty.

Assembly Photos
OEM strut mountKMAC Camber/Caster Plates
Note: photos show mounts installed. This is for reference only. Mounts are sold separately.


This Bilstein PSS9 coilover kit fits the following BMWs:
1997-2003 E39 BMW 540i M5
Show More Show Less

Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 BMW 528i 525i ...
For Touring models only with rear air suspension
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:346250
Part#: 46-180896
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less
Bilstein B12 Sportline Suspension System - E39 528i 525i 530i ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:344120
Part#: 46-180926
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Sportline kit uses an Eibach Sportline spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach Sportline springs are more aggressive than Pro-Kit springs, which tend to be softer overall than most other aftermarket springs, but still ensures ride quality stays close to stock comfort while still giving you a much more aggressive lowered stance and significantly improved handling. 

Bilstein B12 Features: 

  • Quick response and precise handling
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 30 to 60mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i

Show More Show Less

Bilstein B12 Pro-Kit Suspension System - 1999-2003 E39 528i 525i ...
For Touring models only without rear air suspension
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:346249
Part#: 46-180872
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1999-2003 E39 BMW 528i 525i

Show More Show Less
Bilstein B12 Pro-Kit Suspension System - E39 BMW 528i 530i 525i ...
For vehicles without EDC. Average lowering of 1.2"F 0.8-1.0"R For sedan models without EDC. Average lowering of 1.2"F 0.8-1.0"R
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:344119
Part#: 46-180841
Special Order: No Guaranteed ETA
$ 1,119.00 USD
Free Shipping
$ 1,119.00 USD
Free Shipping

Bilstein has teamed up with Eibach to offer matched shock and spring packages. These Eibach springs are mated to a special set of Bilstein shocks to deliver a sporty and taut ride with as little impact on ride comfort as possible.

The Pro Kit uses an Eibach Pro Kit spring with Bilstein's Sport shocks and struts. Instead of taking parts from different manufacturers, Bilstein has tested the performance of the Eibach spring and tailored their shocks to be a true match for the new spring rate and ride height. This is known as a matched shock and spring and very few tuning companies take these extra steps. Eibach springs tend to be softer overall than most other aftermarket springs, which ensures the ride stays close to a stock comfort while still giving you a lowered stance and improved handling. 

Bilstein B12 Features: 

  • Precise response and excellent driving performance
  • Springs and shocks road tested and fine-tuned to complement one another
  • Bilstein Monotube/Inverted gas pressure technology
  • TUV certified
  • Made In Germany
  • Average Lowering of 25 to 40mm

Most cars don't need coil overs to improve their handling and bodyroll. For most drivers, simply replacing the shocks and springs with performance versions will meet their goals. If your shocks need replacing, and you felt the handling could be improved a little bit, this is an excellent performance suspension for you.

This item fits the following BMWs:
1997-2003 E39 BMW 528i 525i 530i

Show More Show Less

Bilstein Coil Over Spanner Wrench Set (Notch Style)
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bilstein - Corporate Logo
T#:1702
Part#: 19101X
Ships in 2 Business Days
$ 22.03 USD
Free Shipping on orders $49 and up
Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Show More Show Less