BMW Brakes & Brake Parts for BMW 5 Series E39 (1996-2003)

Clear BMW chassis
Some of the most critical components of your BMW are those of the brake system. Whether you are performing maintenance on your daily driver or stocking up on performance brakes for race season, keeping your brakes in working order is paramount to enjoying your car. At Turner Motorsport, we have everything you need to replace or upgrade your brake pads, brake rotors, brake lines, and brake fluid. Choose from our excellent selection of brake components to keep your BMW stopping confidently.

Schwaben 11mm Brake Bleeder Wrench
Schwaben - Corporate Logo
T#:362403
Part#: 000550SCH01A
In Stock
$20.95
Free Shipping on orders $99 and up
Finally, a bleeder wrench with just the right angle to open the bleeder screw without having to spend all that time removing each wheel from your car.
ECS Performance Caliper Guide Bushing Set - Most Models
ECS - Corporate Logo
T#:362994
Part#: 003326ECS01
In Stock
$106.95
Free Shipping

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions***

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers.

ECS Performance Brake Caliper Guide Bushing Installation Tool Set
ECS - Corporate Logo
T#:388820
Part#: 003326ECS03
In Stock
$22.95
Free Shipping on orders $99 and up

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

***Click here for installation instructions***


ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - E39 5 Series
ECS - Corporate Logo
T#:552844
Part#: 025317ECS01
In Stock
$53.95
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - E39 5 Series
ECS - Corporate Logo
T#:552850
Part#: 025317ECS04
In Stock
$52.95
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
Schwaben 3-Liter European Pressure Brake Bleeder
Schwaben - Corporate Logo
T#:363245
Part#: 007237SCH01A
In Stock
$54.95
Free Shipping on orders $99 and up

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not exceed 20 PSI
  • One-year warranty

Schwaben 3-Liter Multi-functional Fluid Pump Kit
Schwaben - Corporate Logo
T#:366970
Part#: 007311SCH01A
In Stock
$85.95
Free Shipping on orders $99 and up

We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

Features:

  • Includes 8 special adapters for most transmissions and other fluid filling needs. Adapters all feature quick disconnect with supplied fluid hose.
  • Comes with popular European M45 screw on master cylinder cap adapter and a universal brake bleeding cap for most other systems.
  • aEUR
  • Holds a full 3-Liters ( 3.17 qts) of brake fluid
  • Easy to read 0-30 lbs pressure gauge built into the tank top
  • Pressure relief valve for safe release of pressure
  • 40" hose with detachable swivel fitting
  • Do not exceed 20 PSI

Note: When using for multiple fluids, you must flush tank, hose and pump between use.

ECS Lower Grille With Aluminum Brake Ducts - E39 with M5 Bumper
ECS - Corporate Logo
T#:380382
Part#: 004500ECS02
Direct Ship
$157.95
$157.95

OEM style fitment for increased air flow to brake ducts. Significantly improved brake cooling potential!

May not work on all aftermarket front bumpers, OE M5 style only.


Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed
Turner Motorsport - Corporate Logo
T#:176959
Part#: BBMCV
In Stock
$22.95
Free Shipping on orders $99 and up
This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

Works on just about all brake systems so no need to have specialized adapters or bleed screws.

StopTech Street Performance Brake Pads - Front - E32, E34, E36 M3, E46 M3, E39 528i, MZ3
StopTech - Corporate Logo
T#:12161
Part#: TMS12161
In Stock
$85.03
$85.03
As Used on Project E36 M3
StopTech Street Performance front brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both front calipers

This item fits the following BMWs:
1995-1999 E36 BMW M3
2001-2002 E46 BMW M3
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-1998 E39 BMW 528i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1998-2002 Z3 BMW M Roadster M Coupe
StopTech Street Performance Brake Pads - Rear - E30 M3, E34, E36, E39, E46, Z3, Z4
StopTech - Corporate Logo
T#:12170
Part#: TMS12170
In Stock
$57.90
$57.90
As Used on Project E36 M3
StopTech Street Performance reare brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both rear calipers (should only be combined with StopTech Street Performance front pads).

This item fits the following BMWs:
1984-1991 E30 BMW M3
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
Schwaben 3-Liter Premium European Brake Bleeder
Schwaben - Corporate Logo
T#:387031
Part#: 007237SCH01AKTKT
In Stock
$60.54
Free Shipping on orders $99 and up

This Premium European Brake bleeder features a Heavy-Duty aluminum master cylinder cap adapter for extra long life. Complete with the Schwaben quick couple fitting that can be used on most European cars.

Holds a full 3-Liters ( 3.17 qts) of brake fluid. Easy to read 0-30 lbs pressure gauge built into the tank top. The filling cap features a pressure relief valve for safe release of pressure. A full 40" hose with detachable swivel fitting at tank, allowing for complete disassembly and quick easy cleanup.There is a quality chrome quick coupler on master cylinder end of hose that snaps into master cylinder cap. This feature will allow you to disconnect hose from screw on cap without spilling a drop of fluid. Recommended working pressure of 10 PSI.

Extra plastic cap also included.



Centric Posi Quiet Brake Pads - Rear - E30 M3, E34, E36, E39, E46, Z3, Z4
Centric - Corporate Logo
T#:209146
Part#: TMS209146
In Stock
$36.73
Free Shipping on orders $99 and up
Centric Posi Quiet Brake pads surpass the braking performance of stock pads but do it with far less dust. This semi-metallic pad compound is very easy to use on the street with excellent feel and initial bite and low noise. But the best thing we like with these pads is how little dust they produce. You will be amazed at how little dust there is on your wheels after a week of use. These are a great replacement pad for fans of the discontinued PBR Metal Master Pads.

Position: both rear calipers (should only be combined with Posi Quiet front pads).

This item fits the following BMWs:
1984-1991 E30 BMW M3
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si