BMW Shark Injector Performance Software, 1996-2005 Models for BMW 5 Series E39 (1996-2003)

BMW E36 Shark Injector Performance Software is the ultimate upgrade for boosting the power and torque of your BMW. This performance software, meticulously dyno-tuned by BMW expert Jim Conforti, is engineered to enhance the potential of high-octane (91+) pump gas, significantly increasing mid-range torque and high-RPM horsepower. The Shark Injector also features an increased rev limit, fine-tuned fuel and spark maps, and optimized performance, ensuring that your BMW exceeds its factory capabilities. The installation is straightforward, typically taking just an hour, and maintains drivability while improving responsiveness.

• Adds +15 HP at 6,400 RPM and +9 lb/ft torque at 4,500 RPM
• Increases rev limit to 7,000 RPM for enhanced engine performance
• Optimized for high-octane fuel, elevating mid-range torque and high-RPM horsepower
• Installation is simple with detailed instructions and takes approximately one hour
• Retains original data for potential future use and eliminates the speed limiter

Note: The Shark Injector software is specifically designed for NORTH AMERICAN SPEC BMWs and is not compatible with EURO-SPEC models.

Unleash Hidden Power with the Shark Injector for Your BMW

The Shark Injector is the ultimate solution for effortlessly boosting power and torque in your BMW. This software, meticulously dyno-tuned by BMW tuning legend Jim Conforti, is engineered to optimize high-octane (91+) pump gas, enhancing mid-range torque and high-RPM horsepower. It delivers an elevated level of performance without compromising your BMW's integrity, making it the easiest way to unlock untapped potential.

Key Features:

• Dyno-tuned by BMW tuning legend Jim Conforti
• Raises the rev limit for increased performance
• Fine-tuned fuel and spark maps for superior engine responsiveness
• Easy plug-and-play installation with detailed instructions
• Compatible with high-octane pump gas (91+)

The Shark Injector is meticulously designed to safely improve performance while enhancing driveability and responsiveness. Installation is a breeze - simply connect a battery charger to ensure your car battery has backup power, plug in your Shark Injector, and initiate the process with the push of a button. While the Shark Injector replaces parts of the stock software, it also stores the original data in the unit for future use if needed. When the LED changes from red to green, you're ready to experience your BMW's enhanced performance.

The BMW M52TU engine is already finely tuned, but there are still ample opportunities to elevate your driving experience. Jim Conforti has expertly fine-tuned this Shark Injector to enhance various aspects, from fuel maps and ignition timing to VANOS operation. The result is an impressive addition of 15 HP and 12 lb/ft of torque. Engine response is significantly improved, and the rev limit is raised to 7,000 RPM. Additionally, the speed limiter is removed, unlocking your BMW's full potential. Enjoy a vastly improved driving experience, especially during part-throttle and wide-open throttle acceleration.

Performance Gains:

• +15 HP at 6,200 RPM
• +12 torque @ 3,500 RPM
• Rev limit raised to 7,000 RPM

It's important to note that Shark Injector software is ONLY compatible with NORTH AMERICAN SPEC BMWs and is not designed for EURO-SPEC BMWs.

Shark Injector Performance software includes:

• Unlock LOADS of torque and horsepower in all gears, especially 1st, 2nd, and 3rd
• Sport Mode Memory - the car remembers your last Sport Mode setting
• Choose between 91 and 93 octane
• Quicker throttle response in both Sport and non-Sport modes
• Stock 7000 or Raised 7400 rev limit
• Top Speed Limiter Removed

 

Performance software is a must-have upgrade on your E39 M5 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.

The M5 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The stock software artificially limits torque output, especially in the first three gears. We raised the torque limiters in all gears so there is more torque available. You will see an immediate difference as soon as you leave your driveway! Choose between a stock 7,000 or raised 7,400 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S62 engine beyond what BMW did by making more power and torque and a smoother-running engine.

Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle.

Gains of 23 hp @ 6100 rpm and 19 lb/ft torque @ 5000 rpm!!!
We used several E39 M5s on our dyno to establish what the average/typical power numbers are. The dyno charts on the right are from the same car - a 2003 E39 M5 that was already equipped with intakes, mufflers, and running 93 octane. For our Shark Injector dynos we made baseline runs with the stock software and then runs in 3rd gear and 4th gear. The only changes to the car was the Shark Injector software. Why did we post dyno runs in different gears? The 3rd gear run shows the torque gain with the new torque limiters in the software. The 4th gear run is posted to be consistent with the industry-standard of dyno-ing cars in 4th gear. Note: comparing dyno results and wheel horsepower numbers from one shop to another is not advised. What really matters is the gain from stock to modified from the same car on the same dyno.

The Shark Injector plugs into the diagnostic port inside the E39 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

Read what others are saying!

(click to expand)

RUFM5: "The 93 RACE edition Shark has been very solid in my experience. The air/fuel ratios and power are very smooth and optimal. I also have a wideband gauge and OBD computer to monitor car vitals."
britm3: "Overall, the car feels much sharper in sport and non-sport, the 3rd gear pull really being the highlight for me."
M5CCIE: "Got my 91 octane version installed today. It is worth it's price and much more in my opinion. The car feels much more "eager" and responsive."
Carbon01: "I did the 91Octane TMS/Conforti Shark update last week. I was going to dyno before and after, but didn't have the patience once it arrived. I can say that there is a noticeable difference in 1st thru 3rd. It seems a little more responsive in the higher gears, but not drastic. Transtion from light throttle to full throttle is greatly improved, general drivability is a little better all around and noticeably nicer in Sport."
gt40mki: "I'm glad I bought it-worth every penny-and I'd re-buy again in a heartbeat."
Stika: "Installed the Shark on Friday. I gotta say, the Beast is DEFINITELY quicker. Much stronger on the low end. The drivabilty is much better across the board, at any speed, in any gear. I got the street version with Sport button memory, very nice feature. Don't know what else to add to what has been said already. Worth the purchase to me, I'm very pleased."

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1999-2003 E39 BMW M5

You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!

To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.

Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order. 

Helpful Links:

• Shark Injector File List - listing of all Shark Injector files by vehicle model. Select a file from this list to upgrade to.
• Shipping Instructions - specific instructions for packaging and shipping. Also includes a contact form to include when you send back your Shark.
• Emissions Waiver - some tunes require this emissions/smog waiver before we can program the new file to your Shark. These are noted in the catalog listing in the links above. Print and include this Waiver when you send in your Shark.

Shark Injector installation instructions

Stage 3+ Performance Software for E36 328i/is/ic, E39 528i, and Z3 2.8 (M50 Manifold + M3 Cam Kit)

Conforti Shark Injector performance software tuned for the awesome OBD2 package: M50 manifold, M3 S52 camshafts, and intake. This software makes full use of the benefits of the M50 manifold when used with cams and intake. Without the software, you're not getting the full effect of these upgrades in the upper rev range. The stock software, or a regular Shark Injector, is tuned for low-end torque using the stock manifold and cams. It's like a marathon runner in a 40-yard dash: he'll put in a good effort but won't be the quickest! Special attention was paid to the low-end and mid-range too so that torque was not lost with the M50 manifold.

With this software you will notice more top end power, a broader torque band, and a smoother running engine. The rev limit is raised to 7000 RPM with the top speed limiter removed. Works with 91 or higher octane fuel.

Required:
E36 M3 MZ3 S52 stock camshafts
M50 intake manifold
 

Shark Injector Installation Instructions

(click to expand)

Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.

Shark Injector FAQ

(click to expand)

Shark Injector FAQ

This item fits the following BMWs:
1996-1999 E36 BMW 328i 328ic 328is
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW 2.8

Enhance your BMW's performance effortlessly with the Shark Injector, the ultimate solution for adding power and torque. Tuned by BMW legend Jim Conforti, this software optimizes high-octane pump gas for mid-range torque and high-RPM horsepower. Experience a better-performing BMW without compromising drivability with the Shark Injector's plug-and-play design.

• Easy Installation: Plug in a battery charger, connect the Shark Injector, and initiate the process with the push of a button. Straightforward installation typically takes just an hour.
• Performance Boost: Gain 5 HP at 5,850 RPM, 5 lb/ft of torque at 3,600 RPM, and enjoy a raised rev limit to 7,000 RPM.
• Improved Driving Experience: Jim Conforti's tuning enhances engine response and removes the speed limiter, unlocking your BMW's full potential.
• North American Compatibility: Exclusively designed for North American SPEC BMWs; not suitable for Euro-SPEC BMWs.