BMW Suspension Parts for BMW E60 M5 S85 5.0L

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less
KMAC - Corporate Logo
T#:389668
Part#: 193726J
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. Fits BMW E60 E63 E65.

This item fits the following BMWs:
2004-2010  E60 BMW  525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i M5
2004+  E63 BMW  645ci 650i M6
2002-2008  E65 BMW  745i 745li 750i 750li 760i 760li
2000-2006  E53 BMW  X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
Show More Show Less

Front Thrust Arm - Right
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:592142
Part#: 31102348046
Ships in 3 Business Days
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
Front position control arm with ball joint

OEM Rein Upper Rear Control Arm, Right - E60 E61
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402128
Part#: 33326777426
Back Ordered
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
BMW 5 Series - 525i, 530i, 545i

Show More Show Less