BMW Suspension Parts for BMW E60 M5 S85 5.0L

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Bilstein B16 DampTronic Coilover Kit - E60 M5
For vehicles with EDC
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:201427
Part#: 49-234923
In Stock at Vendor
31% off MSRP $ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD
Free Shipping
31% off MSRP
$ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD
Free Shipping
This Bilstein B16 suspension kit allows you to lower your EDC equipped E60 M5 while maintaining all the factory EDC functions. Finally, you can improve the handling of your car will still retaining the ability to choose your suspension stiffness on the fly with the factory EDC system! This suspension kit allows adjustable lowering of the car from 15mm up to 35mm.

The factory BMW EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock with a push of a button on the center console. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car. This is the ultimate E60 suspension!

The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters that plug directy into the factory EDC system.. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original mounts. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty.

This coilover kit fits the following BMWs:
2006-2010 E60 BMW M5
Show More Show Less
Bilstein Coil Over Spanner Wrench Set (Notch Style)
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:1702
Part#: 19101X
In Stock
$ 22.03 USD
Free Shipping on orders $49 and up
Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).
Show More Show Less
Macht Schnell - Corporate Logo
T#:5351
Part#: TMS5351
Ships on Nov 2, 2026
$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:
  • The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required
  • Compatible with iDrive and non-iDrive systems
  • Easy 15-minute installation process with no wire cutting
  • Proper emulation of the EDC monitoring system
  • No dealer visits or coding required after installation
  • Completely removable at any time

    Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
    Will not work on vehicles equiped with BMW's Dynamic Drive system.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i
  • Show More Show Less

    Bilstein B6 Performance Front Shock - E60 M5 with EDC
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:201425
    Part#: 31-231299
    In Stock
    $ 649.00 USD
    Free Shipping
    $ 649.00 USD
    Free Shipping
    Position: Front Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: 2006-2010 E60 BMW M5 - only for cars with EDC
    Show More Show Less

    Bilstein B6 Performance Rear Shock - E60 M5 with EDC
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:201426
    Part#: 26-231303
    In Stock
    $ 409.00 USD
    Free Shipping
    $ 409.00 USD
    Free Shipping
    Position: Rear Setting: Performance, for stock suspensions The Bilstein B6 Performance Shock is designed for use with stock springs. They are typically about 20% firmer than the original shock, improving body roll, brake dive, and overall handling. These shocks provide improved handling and stability without sacrificing ride comfort. DampTronic B6 Performance shocks and struts are intended to be used with OE springs, allowing you to upgrade your rides performance while retaining factory electronic suspension and controls. Bilstein recommends B8 Performance Plus shocks and struts when lowering a vehicle with lowering springs. This Performance Front shock fits the following BMWs: BMW M5 2010-2006
    Show More Show Less
    Bilstein - Corporate Logo
    T#:384722
    Part#: 31-231299KT
    In Stock
    $ 2,116.00 USD
    Free Shipping
    $ 2,116.00 USD
    Free Shipping

    Bilstein B6 Performance Shock/Strut Package for Stock Springs

    Upgrade your BMW's suspension with the Bilstein B6 Performance shock/strut package, specifically designed for stock springs. This package includes:

    • 2 front Bilstein B6 Performance shocks
    • 2 rear Bilstein B6 Performance shocks
    • Top nuts and rear lower shock washers

    Compatible with stock rear dust boots, these shocks provide improved handling, stability, and safety without compromising ride comfort. The DampTronic B6 Performance shocks are ideal for maintaining factory electronic suspension.

    Features and Benefits:

    • Monotube gas pressure construction
    • Improved safety and sportiness
    • Enhanced traction and stability
    • Increased durability while maintaining ride comfort
    • Road-tested and fine-tuned by BILSTEIN for specific applications
    • Limited lifetime warranty*

    *Bilstein offers a limited lifetime warranty for defects in material and workmanship. Contact Turner Motorsport for warranty details.

    Show More Show Less