BMW Suspension Parts for BMW E60 M5 S85 5.0L

BC Racing BR Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

T#:555852

Part#: I-15-BR

Ships in 3 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - BMW E60 M5 & Non-M ...

T#:568103

Part#: I-15E-BR

Ships on Dec 1, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

T#:598275

Part#: I-15-DS

Ships on Dec 1, 2026

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Meyle Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...

Two required per vehicle, one per side.

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:362103

Part#: 33326767748

Ships on Nov 2, 2026

$ 243.99

This product was last offered at the strikethrough price on
08-17-2026

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

Pressed into rear wheel carrier

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

T#:389662

Part#: 193616-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003 E39 BMW 525i 528i 530i 540i (for cars with EDC)
1999-2003 E39 BMW M5
1995-2001 E38 BMW 740i 740il 750il (for cars with EDC)
2004-2010 E60 BMW M5
2004-2011 E63 BMW M6

Show More Show Less

Adjustable Front Camber Bushings

T#:31522921

Part#: 193616-6H

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

T#:389317

Part#: 193616-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

KMAC Street Rear Adjustable Camber/Toe Bushings - E60 E63 E65 E53 X5 ...

T#:389668

Part#: 193726J

Special Order: No Guaranteed ETA

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. Fits BMW E60 E63 E65.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i M5
2004+ E63 BMW 645ci 650i M6
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2000-2006 E53 BMW X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is

Show More Show Less

Meyle Rear Upper Control Arm - left - E60, E61, E63, E64, E65, E66 ...

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:579398

Part#: 3160500054

Ships on Nov 2, 2026

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

Rear position control arm with bushing

Rear Upper Control Arm - Right

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:36201622

Part#: 33326777426

Ships on Nov 2, 2026

$ 90.99 USD

Add to Wish List

Qty

$ 90.99 USD

Add to Wish List

Control arms are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals. For a street-driven car we advise yearly inspection and a full replacement every 3-4 years. For track-driven cars these should be inspected before every event and replaced every two years. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform! This item fits the following BMWs: BMW 5 Series - 525i, 530i, 545i

Show More Show Less

Meyle Front Lower Control Arm - Right - E60

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:378643

Part#: 31122347965

Ships on Nov 2, 2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

Control arm with ball joint. Found in the rear position

Control Arm Mounting Kit

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:4948344

Part#: 3147540004

Ships on Dec 4, 2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Hardware to install one rear control arm - 3 bolts, 4 nuts, and 1 shim.

Meyle Dust Boot Kit

5X Entries Into Our F80 M3 Sweepstakes

T#:40444311

Part#: 3146400013

Ships on Nov 2, 2026

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Protect your suspension with this Meyle front shock dust boot—precision-fit to OE specs for easy install and long-term reliability. It shields your strut from dirt, grime, and moisture, extending shock life and preserving that smooth, confident ride. A simple upgrade that pays off every mile.

Show More Show Less

Meyle Dust Boot Kit

5X Entries Into Our F80 M3 Sweepstakes

T#:40444307

Part#: 3146400018

Ships on Dec 10, 2026

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Safeguard your front shocks from grime, moisture, and road debris with this Meyle dust boot. Built to OE specifications, it helps prolong shock life and preserve smooth suspension performance—an easy, budget-friendly upgrade for long-term reliability.

Show More Show Less

Meyle Front Lower Control Arm - Left - E60

5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!

T#:378644

Part#: 31122347963

Ships on Nov 2, 2026

$ 98.99 USD

Add to Wish List

Qty

$ 98.99 USD

Add to Wish List

Control arm with ball joint. Found in the rear position

Meyle Dust Cover Kit

5X Entries Into Our F80 M3 Sweepstakes

T#:40478106

Part#: 3146400007

Ships on Nov 2, 2026

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

The Meyle 3146400007 Front Shock Dust Boot is a durable, OEM-style replacement designed to shield your suspension components from the elements. Precisely engineered for a perfect fit on your BMW’s front shocks, it blocks dirt, moisture, and debris, helping maintain smooth performance and extending strut life. Easy to install and built for longevity, it’s an essential upgrade for preserving your ride’s integrity.

Show More Show Less

Meyle - Ball Joint (Pair) and Press Tool

5X Entries Into Our F80 M3 Sweepstakes

T#:40342808

Part#: 33326767748

Ships on Nov 2, 2026

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

Available through Turner Motorsport, this product delivers superior German engineering for a smooth, quiet ride and long-lasting suspension performance.

| Dust cover kit, shock absorber BMW 7 (E65, E66) (07/01-12/09) ...

5X Entries Into Our F80 M3 Sweepstakes

T#:40444309

Part#: 3146400014

Ships on Nov 2, 2026

$ 35.99 USD

Add to Wish List

Qty

$ 35.99 USD

Add to Wish List

Protect your BMW’s suspension with this Meyle front shock dust boot. Built to OE specs, it guards your strut from dirt, debris, and moisture—helping extend shock life and preserve ride comfort. A smart, budget-friendly upgrade that delivers lasting value.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW E60 M5 S85 5.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

BC Racing BR Series Extreme Low Coilovers - BMW E60 M5 & Non-M ...

BC Racing DS Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

BC Racing Rear Damping Adjustment Extenders - BR Type

Meyle Ball Joint - E38, E39, E53, E60, E61, E63, E64, E65, E66 ...

KMAC Stage 3 Track Front Adjustable Camber/Caster Plates - E39 540/M5...

Adjustable Front Camber Bushings

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E39...

KMAC Street Rear Adjustable Camber/Toe Bushings - E60 E63 E65 E53 X5 ...

Meyle Rear Upper Control Arm - left - E60, E61, E63, E64, E65, E66 ...

Rear Upper Control Arm - Right

Meyle Front Lower Control Arm - Right - E60

Control Arm Mounting Kit

Meyle Dust Boot Kit

Meyle Dust Boot Kit

Meyle Front Lower Control Arm - Left - E60

Meyle Dust Cover Kit

Meyle - Ball Joint (Pair) and Press Tool

| Dust cover kit, shock absorber BMW 7 (E65, E66) (07/01-12/09) ...

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results