BMW Coilovers for BMW E60 M5 S85 5.0L

BC Racing BR Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555852

Part#: I-15-BR

Ships in 3 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Show More Show Less

Bilstein B16 DampTronic Coilover Kit - E60 M5

For vehicles with EDC

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:201427

Part#: 49-234923

In Stock

31% off MSRP $ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

Qty

31% off MSRP

$ 5,345.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 3,699.00 USD

Add to Wish List

This Bilstein B16 suspension kit allows you to lower your EDC equipped E60 M5 while maintaining all the factory EDC functions. Finally, you can improve the handling of your car will still retaining the ability to choose your suspension stiffness on the fly with the factory EDC system! This suspension kit allows adjustable lowering of the car from 15mm up to 35mm.

The factory BMW EDC (Electronic Damping Control) system uses an electronic control module wired to each shock absorber to vary the stiffness of the shock with a push of a button on the center console. You can leave it in Comfort for around-town running and instantly get a tighter and more responsive suspension for twisty country roads. The Comfort setting is also dynamic - sensing road characteristics and g-forces to instantaneously firm the suspension when you're pushing the car. This is the ultimate E60 suspension!

The basic kit is a Bilstein PSS system with true coil over front struts, rear shocks, four springs, height adjusters that plug directy into the factory EDC system.. The front struts are zinc coated for superior corrosion resistance. The system installs just like a normal suspension and uses the factory original mounts. Installation instructions included but professional installation is strongly recommended. This kit is TUV certified and a limited lifetime warranty.

This coilover kit fits the following BMWs:
2006-2010 E60 BMW M5

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - BMW E60 M5 & Non-M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:568103

Part#: I-15E-BR

Ships on Aug 11, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

KW V3 Series Coilover Kit - E60 M5 (With EDC)

For vehicles with EDC suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11664

Part#: 35220082

Back Ordered

$ 4,594.00 USD

Add to Wish List

Qty

$ 4,594.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

Separate adjustments for compression (14 positions) and rebound (infinite settings),

Stiffer springs over stock for less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-30mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
The factory EDC system must be disabled using the KW EDC Cancellation Kit (available from the menu below).

Lifetime warranty!

This item fits the following BMWs:
2006-2010 E60 BMW M5

Show More Show Less

KW Street Comfort Coilover Kit - E60 525/528/530/535/550/M5 RWD ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:553684

Part#: 18020005

Back Ordered

$ 2,494.00 USD

Add to Wish List

Qty

$ 2,494.00 USD

Add to Wish List

KW Street Comfort: Individual sport suspension with Maximum comfort Height adjustable Street Comfort allows a lowering of 10-40mm depending on the vehicle. This allows for the flexibility to improve the look while adding custom products like aftermarket wheels. At the same time the lowering has a positive effect on the driving dynamics and road contact. With this discreet but effective lowering more spring travel will be retained to combine a comfortable spring with harmonic dampener, this way the best driving comfort is guaranteed.

Show More Show Less

KW V1 Series Coilover Kit - E60 M5 (With EDC)

For vehicles with EDC suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367045

Part#: 10220082

Back Ordered

$ 2,724.00 USD

Add to Wish List

Qty

$ 2,724.00 USD

Add to Wish List

KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:598275

Part#: I-15-DS

Ships on Aug 11, 2026

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

KW V1 Series Coilover Kit - E60 M5 (W/O EDC)

For vehicles without EDC suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:367044

Part#: 10220046

Back Ordered

$ 2,334.00 USD

Add to Wish List

Qty

$ 2,334.00 USD

Add to Wish List

Factory Pre-set DampingÂ

The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
TUV approved lowering range and operation,
Expert engineering and design for ease-of-use and long durability,

Show More Show Less

KW V3 Series Coilover Kit - E60 M5 (W/O EDC)

For vehicles without EDC suspension

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:361435

Part#: 35220046

Back Ordered

$ 4,194.00 USD

Add to Wish List

Qty

$ 4,194.00 USD

Add to Wish List

Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

Separate adjustments for compression (14 positions) and rebound (infinite settings),

Stiffer springs over stock for less bodyroll than the standard suspension,

Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,

Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-30mm lowering,

TUV approved lowering range and operation,

Expert engineering and design for ease-of-use and long durability,
Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
The factory EDC system must be disabled using the KW EDC Cancellation Kit (available from the menu below).

Lifetime warranty!

This item fits the following BMWs:
2006-2010 E60 BMW M5

Show More Show Less

Bilstein Coil Over Spanner Wrench Set (Notch Style)

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1702

Part#: 19101X

Ships in 2 Business Days

$ 22.03 USD

Add to Wish List

Qty

$ 22.03 USD

Add to Wish List

Bilstein Coil Over wrench set for some PSS, PSS9 and PSS10 kits. Consists of a Large wrench and a Small wrench for adjusting the spring perch (76.25mm) and lock ring (75.75mm) on coil overs that require the rectangular notch style head (not round pin style adjuster). Can also be used with other coil over kits (H&R, Moton, JRZ, etc).

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:555864

Part#: DMP-EXT

Ships in 1-3 days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Macht Schnell EDC Emulation Module

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5351

Part#: TMS5351

Ships on Jul 10, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

ECS Coilover Damping Extensions - 220MM

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:42369339

Part#: 004673LA01

In Stock

Sale - Save 10% $ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 37.99

This product was last offered at the strikethrough price on
06-14-2026

$ 34.19 USD

Add to Wish List

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

Show More Show Less

BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:31390573

Part#: 65030047

Back Ordered

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each

The BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each is designed to be used with KW/ST coilover systems, providing additional lift to your vehicle beyond the standard coilover adjustments. Each spacer is 50mm thick and is sold individually, with one required per coil.

Adds 50mm of additional height to your vehicleâ€™s suspension.
Ideal for use with KW/ST coilover systems.
Helps achieve desired ride height when coilovers alone are insufficient.
Sold individually for custom fitment.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Coilovers for BMW E60 M5 S85 5.0L

Sub-Categories

BC Racing BR Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

Bilstein B16 DampTronic Coilover Kit - E60 M5

BC Racing BR Series Extreme Low Coilovers - BMW E60 M5 & Non-M ...

KW V3 Series Coilover Kit - E60 M5 (With EDC)

KW Street Comfort Coilover Kit - E60 525/528/530/535/550/M5 RWD ...

KW V1 Series Coilover Kit - E60 M5 (With EDC)

BC Racing DS Series Coilover Suspension Kit - BMW E60 M5 & Non-M ...

KW V1 Series Coilover Kit - E60 M5 (W/O EDC)

KW V3 Series Coilover Kit - E60 M5 (W/O EDC)

Bilstein Coil Over Spanner Wrench Set (Notch Style)

BC Racing Rear Damping Adjustment Extenders - BR Type

Macht Schnell EDC Emulation Module

ECS Coilover Damping Extensions - 220MM

BMW E36 E46 E9X Coil Spring Spacer - 50mm - Priced Each

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results