BBS Square Performance Wheel Sets for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Square wheel sets include a complete set of wheels with identical dimensions for front and rear. Many OE wheels setups run square fitment as it keeps manufacturing costs lower, and offers predictable and even grip levels at all four corners. An added benefit of running a square set is reduced tire costs. Generally tires are cheaper when purchased as a complete set and are much easier to source.

Sub-Categories

Sort By:
18" BBS RI-A Diamond Silver - Square Set
18" BBS RI-A Diamond Silver - Square Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BBS - Corporate Logo
T#:5484741
Part#: RIA007DS1KT
Ships on Jul 28, 2026
$ 4,380.00 USD
Free Shipping
Add to Wish List
$ 4,380.00 USD
Free Shipping
Add to Wish List
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Square set of BBS RI-A Diamond Silver 18x8.5 ET34 72.5 CB FPS Rings
Show More Show Less
18" BBS RI-A Matte Graphite - Square Set
18" BBS RI-A Matte Graphite - Square Set
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BBS - Corporate Logo
T#:5484740
Part#: RIA007MGR1KT
Ships on Jul 28, 2026
$ 4,380.00 USD
Free Shipping
Add to Wish List
$ 4,380.00 USD
Free Shipping
Add to Wish List
BBS has been engineering true high performance wheels for more than 50 years. Over the past 50 years, BBS wheels have won over 250 series Championships, ranging from F1, Touring Cars, Prototypes, Silhouette, Open-wheel, World Rally Championships, Hillclimb and Motorcycles. We understand what it takes to engineer wheels and technologies that can not only compete, but can win Championships. Since BBS produces OE wheels for many manufacturers including companies like BMW, Ferrari and Porsche, we understand the true performance requirements along with the proper load rating, tolerances and durability specifications. If your looking for the ultimate wheel for your BMW, BBS should be the first wheel that comes to mind. Gain the performance and status that comes along with BBS wheels. One-Piece Die Forged Aluminum Wheel - BBS Patented Milling Process inside the spoke area - Weight optimized by FEM analysis. Square set of BBS RI-A Matte Graphite 18x8.5 ET34 72.5 CB FPS Rings
Show More Show Less
19 Style RXR 307 Wheels - Square Set Of Four
19 Style RXR 307 Wheels - Square Set Of Four
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
BBS - Corporate Logo
T#:402760
Part#: RX301GSKT
Back Ordered
$ 2,389.00 USD
Add to Wish List
$ 2,389.00 USD
Add to Wish List

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RX-R wheels consist of a pressure cast wheel surface and a flow formed rim structure.  Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Satin Gold and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Satin Gold
  • Center Bore: PFS
  • Bolt Pattern: 5x120
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Shipping