BMW Maintenance & Tune-Up Parts for BMW 5 Series E60 (2004-2010)

Liqui Moly Top Tec 1800 Automatic Transmission Fluid - 20 Liters

Fully synthetic leading-edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears. The use of modern additive technology provides ultimate protection, longer fluid life, and stability combined with ideal shift quality under all operating conditions.

Properties:

• Excellent viscosity/temperature properties
• Prevents foam formation
• Enables a multifaceted range of applications
• Outstanding friction characteristics
• High resistance to aging
• Very good low-temperature properties
• Excellent corrosion protection
• Very wear-resistant
• Outstanding resistance to oxidation

Approvals:

Dexron VI

Ford Mercon LV

LiquiMoly recommends this product for vehicles that need to comply with the following specifications:

• Aisin Warner AW-1
• BMW 83 22 0 142 516
• BMW 83 22 2 152 426
• BMW 83 22 2 289 720
• BMW 83 22 2 305 396
• BMW 83 22 2 305 397
• BMW 83 22 2 355 599
• BMW M-1375.4
• MB 236.12
• MB 236.14
• VW G 055 005
• VW G 055 540
• VW G 060 162

The THINKEASY V2 Battery Tester is an advanced device designed for effortless and efficient diagnosis and monitoring of your car's battery condition. It incorporates the latest Bluetooth 5.0 technology, ensuring accelerated and reliable data transfer, along with a significant reduction in power consumption compared to other automotive battery testers. This versatile tester is compatible with a range of battery types, including regularly flooded, AGM flat plate, AGM Spiral, EFB, and gel batteries.

Powerful Capability:

• Capable of testing 12V batteries with ratings from 100-2000 CCA.
• Includes starter and alternator testing.

Versatile Battery Testing:

• Compatible with multiple battery types, such as flooded, AGM flat plate, AGM spiral, and gel.
• Test standards include CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE.

Convenient In-Vehicle and Out-of-Vehicle Testing:

• Test batteries without having to remove them from the vehicle.

Complete Battery Analysis:

• Performs Battery Health Test, Start System Test, Charging Health Test.
• Provides a comprehensive test record.

Detailed Test Results:

• Displays SOH, SOC, CCA Value, CCA rating, voltage, internal resistance, and more.

Quick and Accurate Results:

• Provides reliable results in seconds with up to 99.9% accuracy.
• Offers suggestions (Good, Recharge, Replace).
• Polarity reverses connection protection.

Multilingual Support:

•  Available in 7 languages: English, Spanish, German, Russian, Italian, French, and Portuguese.

Wide Applicability:

• Suitable for use in automobile factories, garages, auto battery manufacturing, and by DIY enthusiasts, etc.

CATACLEAN - The Original Science is a patented, EPA-approved engine, fuel, and exhaust system cleaner that effectively reduces carbon build-up and cleans critical components such as oxygen sensors, fuel injectors, and cylinder heads. This versatile product is safe for gasoline, diesel, and hybrid engines and does not alter fuel composition.

• EPA Approved: Meets stringent environmental standards for safe and effective use.
• Versatile Compatibility: Safe for gasoline, diesel, and hybrid engines without altering fuel composition.
• Comprehensive Cleaning: Cleans oxygen sensors, fuel injectors, and cylinder heads while reducing carbon build-up.
• Emission Reduction: Can lower total hydrocarbon emissions by up to 50%, improving environmental performance.
• Enhanced Engine Performance: Addresses drivability issues like power reduction, hesitation, and hard starts.
• Catalytic Converter Efficiency: Helps restore and maintain catalytic converter efficiency, extending vehicle life.
• Improved Fuel Efficiency: Can lead to better fuel efficiency and increased MPG.
• Easy to Use: Simply pour into the fuel tank and drive for optimal results; use four times a year.
• Durable Packaging: New COEX-HDPE bottle designed for increased strength with no evaporation.

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

• Consistent filtering across entire filter surface
• Superior ASTMF316 filtration performance
• Magnetic Prefiltering
• Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
• Easy inspection of engine contamination
• Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the OEM Bosch ignition coil for the N52 engine used in cars up to 4/2006 production date. You can find your car's production date on the driver's door pillar in MM/YY format. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. This part number replaces previous BMW part number 12137548553.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Sold per coil. Includes connecting boot.

This item fits the following BMWs:
2006-4/2006 E90 BMW 325i 325xi 330i 330xi
2006-4/2006 E60 BMW 525i 525xi 530i 530xi
2006-4/2006 E85 BMW Z4 3.0i Z4 3.0si

Engineered with an exclusive full-synthetic ester formula, these top-tier products are meticulously crafted to cater to various vehicles, including passenger cars, light trucks, performance vehicles, and marine applications. Offering an unparalleled level of quality, they boast an extensive range of viscosity options, ensuring the highest standards in the current market.

• Full-synthetic ester formula suitable for diverse vehicle types
• Exceptional protection, efficiency, and extended drain intervals
• Outstanding wear protection and friction reduction in varied conditions
• High detergency for increased cleanliness and prolonged drain intervals
• Enhanced fuel economy, improved ring seal, and elevated power output
• Unmatched high temperature stability and oxidation resistance for superior lubrication
• Natural high viscosity index providing a thicker oil film in crucial engine components
• Reduced evaporation, ensuring improved efficiency and ring seal
• Blended with polyol ester base stocks for multi-grade properties and enhanced lubricity
• Compatible with both conventional and synthetic motor oils
• Recommended for API SN/SM/SL/SJ/SH/SG/CF and ACEA A3/B3/B4 specifications

10w-60 Engine Oil Liqui Moly Race Tech GT1 is specially formulated to meet the rigorous demands of high-performance BMW engines. This advanced engine oil provides exceptional lubrication, ensuring optimal engine performance even under the most challenging conditions. Designed for both street and track use, it offers superior wear protection and thermal stability, making it the perfect choice for enthusiasts who demand the best for their vehicles.

Benefits:

• High Viscosity Stability: Maintains consistent performance across a wide temperature range, ideal for both hot and cold conditions.
• Exceptional Engine Protection: Reduces wear and tear, extending the life of engine components, and ensuring reliability during high-performance driving.
• Enhanced Performance: Improves engine responsiveness and efficiency, providing noticeable power gains and better throttle response.
• Compatible with BMW Engines: Specifically designed to meet the lubrication needs of BMW’s high-performance engines, including those in motorsport applications.
• Advanced Additive Technology: Includes high-quality additives that prevent sludge formation and keep the engine clean for optimal performance.

Choose 10w-60 Engine Oil Liqui Moly Race Tech GT1 for your BMW to experience superior performance and protection in every drive.

BMW M60 M62 Engine Spark Plugs - Set Of Eight (Platinum+4) are the perfect solution to restore the performance of your BMW's engine. These high-quality Platinum+4 spark plugs are designed to provide a strong and consistent spark, improving idle, fuel efficiency, and overall engine performance. Worn spark plugs can cause poor idling, low fuel economy, and engine misfires, but replacing them with these Platinum+4 plugs ensures a more powerful spark and reduces carbon buildup, enhancing engine efficiency.

For optimal performance, it's recommended to replace all serviceable ignition components, including spark plugs and coil packs. Doing so will ensure your ignition system operates at peak efficiency, improving power and fuel economy.

• Platinum+4 design provides a strong, consistent spark
• Improves idle, fuel efficiency, and overall engine performance
• Reduces carbon buildup for better engine efficiency
• Helps prevent engine misfires and low fuel economy
• Ideal for replacing all ignition components for optimal results