BMW Brakes & Brake Parts for BMW 5 Series E60 (2004-2010)

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

The stock M5 brakes provide a powerful upgrade over the stock brakes on non-M E60 models - 525i, 528i, 530i, 535i, 545i, and 550i. This kit uses the factory E60 M5 front 2-piston calipers with M5 rotors for a bolt on braking upgrade. Everything comes complete - 2-piston calipers, rotors, caliper bracket, stainless brake lines, and a pad sensor. Each rotor option is similar to the factory 2-piece floating and drilled rotors. Choose your preferred brake rotors, brake pads, and brake fluid from the options below (or call us for a recommendation).

Brake rotor options -

• Zimmermann Coated
• Genuine BMW
• Centric/StopTech Coated
• ECS 2-piece Floating Drilled + Slotted

Brake pad options -

• Centric Posi-Quiet street (nearly dust-free!)
• OEM Pagid or Textar street
• Cool Carbon performance
• Hawk HPS performance
• Hawk Ceramic street (nearly dust-free!)
• StopTech performance

This is a direct fit to all non-M E60 RWD models and comes with a lot more braking power than standard. Consequently there will be more front brake bias - the front brakes have more bite than before. During normal street driving all you will notice is that the brakes feel stronger. For track driving we recommend a more aggressive rear pad to balance the brake bias or a StopTech or Brembo big brake kit that has been properly engineered for the chassis (not a retrofit).

Requires 18" wheels and wheel spacers may be required depending on wheel spoke design.

This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear.

***Click here for installation instructions*** 

***Click here for the installation tool***

For most models with floating calipers. Fits the rear of E90/2 and E60, but for the front you'll need the kit found here. Does not fit E30 models with Girling calipers, but is compatible with Ate calipers. 

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2004-2010 E60 BMW 535i 545i 550i 

2004-2010 E63 BMW 645ci 650i

2002-2008 E65 BMW 745i/li 750i/li 760i/li

2008-2013 E9X BMW M3

Ceramic Brake pads have advanced a great amount and show drastic advantages over traditional metallic and semi-metallic brake pads. Akebono in particular has been producing brake pads for major brands for years and their Euro brake pads have seen use in over 90 models of vehicles as the OE brake pads, ensuring high, consistent quality.

Thanks to Akebono’s pad formulation, you can enjoy many benefits including:

• Reduced Heat Absorption
• Reduced Brake Fade
• Reduced Stopping Distances
• Significantly Less Brake Dust
• Increased Brake Rotor Life

This item fits the following BMWs:

2004-2010 E60 BMW M5 535I 545I 550I

2004-2010 E63 BMW 645CI 650I M6

2002-2015 E65 F01 BMW 745i/Li 750i/Li 760i/Li

2008-2013 E93 BMW M3

2007+ E70 F15 BMW X5

2008+ E71 F16 BMW X6