Packaged by Turner BMW Engine Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Oil Pan Gasket & Level Sensor Refresh Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:57543746
Part#: 12617607909KT3
In Stock
New Item
$ 308.99 USD
Free Shipping on orders $49 and up
Protect your engine's lubrication system and maintain critical track day telemetry with a complete Oil Pan Gasket & Level Sensor Refresh Kit. Aged oil pan gaskets and oil level sensors are notorious failure points that lead to messy leaks, loss of fluid, and inaccurate oil level readings under hard driving conditions. This complete service package supplies a precision molded pan gasket, an OEM spec oil level sensor, brand new single use pan bolts, and fresh sensor fasteners. Designed to restore factory sealing integrity and precise instrument cluster readings, this kit provides everything needed for a clean, permanent repair.
Show More Show Less
Bosch Oxygen Sensors - Bank 1 And 2 Pre-Cat - N52
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110313
Part#: 11787558055KT
In Stock
New Item
$ 307.99

This product was last offered at the strikethrough price on
08-13-2026

$ 304.99 USD
Free Shipping on orders $49 and up
$ 304.99 USD
Free Shipping on orders $49 and up
Your engine's air fuel ratio needs to be dead on. Worn out factory pre-cat oxygen sensors delay vital data to the DME, leading to sub optimal fueling, lost horsepower, and dangerous hesitation under load.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:221962
Part#: TMS221962
Ships in 2 Business Days
$ 458.99 USD
Free Shipping
$ 458.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create an oil sludge condition that is impossible to clear. The plastic hoses can become brittle and crack which leads to vacuum leaks and oil leaks. Thankfully, the CCV is replaceable on the early N52 engines (2006 and some 2007 models) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

This is a kit containing the oil separator, the vent hoses, and the intake manifold gaskets that are done during a typical oil separator replacement. Complete kit includes:
  • 11617531423, Genuine BMW oil separator
  • 11617559530, vent hose
  • 11157522931, oil separator hose
  • 11157567801, return hose
  • 11157537701, extraction hose
  • 11617547242, intake manifold gaskets (set of 6)
    The intake manifold must be removed to access the oil separator so new profile gaskets are included. We also recommend (but not required) a new oil separator fitting on the intake manifold because it's one of the heated elements that vaporizes the oil as it enters the intake.

    The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

    This kit fits the following BMWs:
    -10/2005 E90 BMW 325xi 330xi - Sedan
    -10/2005 E91 BMW 325xi - Wagon
    -10/2005 E60 BMW 525xi 530xi
  • Show More Show Less

    N52 Vanos Adjustment Unit Kit - BMW E82/88 E9X N52 3.0L
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:24145972
    Part#: N52VNSADJKT
    Ships in 2 Business Days
    Sale - Save 11% $ 541.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 483.16 USD
    Free Shipping on orders $49 and up
    Sale - Save 11%
    $ 541.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 483.16 USD
    Free Shipping on orders $49 and up
    This kit includes the basic components necessary to install new camshaft adjustment units on your N52 engine. Included: Intake & Exhaust Camshaft Adjustment Unit Valve Cover Gasket Upper Timing Chain Guide Impulse Sending Wheels Adjustment Unit Mounting Collar Bolts
    Show More Show Less

    E60 535i/xi 07-10 Stage 1 Motorsport Performance Package
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:338763
    Part#: TMS11770
    Back Ordered
    Starting at $ 1,194.00 USD
    Free Shipping
    Starting at $ 1,194.00 USD
    Free Shipping
    2007-2010 E60 535i/535xi Stage 1 Performance Package
    Peak Power Gain: +65hp / +99ft-lbs
    Octane: 91 or higher

    Our Stage 1 kit features a cold-air intake kit and performance software for a staggering increase in power and torque. We offer this package with the aFe Dual Cone Intake (DCI) to open up the breathing. The larger surface area of the filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

    We have paired the aFe DCI with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning map. Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

    We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a fantastic snarling sound every time you dip into the throttle. Note that peak power gains are quoted above but this package has even bigger performance gains in the lower RPM!!

    E60 535i, 535xi Stage 1 Engine Upgrade includes:
    aFe Dual-Cone Intake (filter, mounting shield, intake tubes)
    Cobb AccessPort Performance Programmer

    This item fits the following BMWs:
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    Show More Show Less
    Ultimate Valve Cover Gasket Kit - With Hardware
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:57761578
    Part#: 11120030496KT4
    Ships in 2 Business Days
    New Item
    $ 236.76 USD
    $ 236.76 USD
    This all-inclusive Valve Cover Service Kit eliminates the guesswork by combining complete factory-spec sealing with show-quality Turner Motorsport hardware.

    N54 Crank Hub Service Kit - From 02/2011
    For vehicles with production date from 02/2011
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:2227020
    Part#: N54POCRANKT
    In Stock
    Sale - Save 3% $ 150.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 146.61 USD
    Free Shipping
    Sale - Save 3%
    $ 150.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 146.61 USD
    Free Shipping
    All of the components necessary for service when upgrading to an aftermarket crank hub solution.
    Oil Pan Gasket replacement kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644328
    Part#: 111375351060KT
    In Stock
    $ 208.21 USD
    Free Shipping on orders $49 and up
    A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years. This kit also includes the hardware for the oil pan that is a one time use item.

    Rod Bearing Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15744047
    Part#: 11247841703-KT
    Ships in 1-2 days
    $ 1,675.99 USD
    Free Shipping on orders $49 and up
    The S85 engine has a known history of rod bearing failure, and if your engine is higher mileage, don't let this catastrophic failure happen to you. Replace your rod bearings and prevent a spun bearing which can trash your crankshaft. Kit includes Upper and lower road bearings Hardware Oil filter Castrol TWS Edge Professional Oil pan gasket RedLine assembly lube
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:23516109
    Part#: 6PK1084TKT
    Ships in 5 Business Days
    $ 936.99 USD
    Free Shipping on orders $49 and up
    Eliminate your squeaking accessory belt pulley and cracked drive belt with this upgraded accessory belt service kit! This kit includes the ECS Kevlar Reinforced Drive Belts, tensioner assemblies, and new tensioner pulleys. ECS Tuning's Red Kevlar Accessory Belts are both an aesthetic improvement and a performance alternative to a traditional belt. Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM-style belts. Refreshing the rollers and/or tensioners simultaneously is a great way to ensure all vital components of your drive belt system are functioning optimally for years to come!
    Show More Show Less
    E60 M5, E63 M6 Rod Bearing Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:340429
    Part#: TMS222797
    Ships in 1 day
    Starting at $ 1,059.99 USD
    Free Shipping
    Starting at $ 1,059.99 USD
    Free Shipping
    Rod bearings should be replaced as a preventative measure before 80,000 miles. This is the set of rod bearings for the S85 V10 in the E60 M5 and E63 M6 (BMW part numbers 11247841703 and 11247841702). This is just the set of bearings and does not include any of the other items that need to be replaced at the same time (connecting rod bolts, oil pan gasket, hardware, etc). Click here for the complete M5/M6 rod bearing replacement kit.

    Rod bearings continue to be a sore subject among M3, M5, and M6 owners. The rod bearings in the S85 V8 have been known to fail within 60,000 miles. There could be a number of reasons for premature failure with a lot of finger-pointing as to the real cause. Whatever the reason, rod bearings are wearing out sooner than expected and their replacement should be considered a required preventative maintenance item. We suggest a replacement interval of between 60,000-80,000 miles with frequent engine oil analysis done along the way*. Driving moderately and allowing the engine to warm up before hard use will also extend rod bearing life.

    * BMW released an updated rod bearing around 2011 that uses different materials than the original design. The old rod bearings were constructed with several layers or metal, including copper and lead. If an engine oil analysis revealed high levels of these specific metals then it was a sure sign that the rod bearings were nearing replacement. However, the new BMW bearings do not use copper or lead so an oil analysis will not alert you to heavy bearing wear. The new bearings are also a harder material which prolonged the life of the bearing but increased the liklihood of crankshaft damage if a bearing failed. Even though the bearing theoretically lasts longer it's even more important to preventativly replace them before they damage the crankshaft.

    This set fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6
    Show More Show Less
    Idle Control Valve Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15744026
    Part#: 11611437453-KT
    In Stock
    $ 173.13 USD
    Free Shipping on orders $49 and up
    Located in the intake system, this part is a common source of idle issues. This kit includes a new mount and idle control valve grommet


    N54 Twin Turbo Replacement Kit
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15644254
    Part#: 11657558922-KT
    Ships in 2 Business Days
    $ 2,694.99

    This product was last offered at the strikethrough price on
    09-01-2026

    $ 2,631.99 USD
    $ 2,631.99 USD
    There are two turbos mounted to the engine of your BMW's motor, and this is the one located on the front of the exhaust manifold. Signs of a failing turbo include unusual oil consumption, smoking, increased turbo lag, failure to hold boost, or the vehicle going into "limp mode". To restore the performance of your BMW, be sure to replace any failing turbocharger. Kit contains Front and rear original equipment Mitsubishi turbochargers 1 Gallon of coolant ​16 - ASA M7x39 studs 16 - Flange nuts All required gaskets and o-rings Water pump install hardware Replacement vacuum hose T-bolt clamps
    Show More Show Less
    OEM Accessory Belt Service Kit - E60/61 525 530
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:589756
    Part#: PBTABE60M54KT
    Back Ordered
    $ 269.99 USD
    Free Shipping
    $ 269.99 USD
    Free Shipping
    Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
    Show More Show Less
    Performance Connecting Rod Bolt And Bearing Kit - S85
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:55317700
    Part#: S85RBKT2
    Ships on Oct 15, 2026
    New Item
    $ 1,103.00 USD
    Free Shipping on orders $49 and up
    From the factory, the S85’s rod bearing clearances are notoriously tight. Over time, this lack of adequate oil clearance leads to premature wear, accelerated friction, and the looming threat of catastrophic engine failure.
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:43277324
    Part#: 11247834522ARPKT
    Ships on Oct 20, 2026
    $ 1,567.99

    This product was last offered at the strikethrough price on
    04-07-2026

    $ 1,560.99 USD
    Free Shipping on orders $49 and up
    $ 1,560.99 USD
    Free Shipping on orders $49 and up

    Turbos and Turbocharger Installation Kit - N54
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:55317702
    Part#: 13712247398KT5
    Ships on Oct 27, 2026
    New Item
    $ 1,869.81

    This product was last offered at the strikethrough price on
    09-10-2026

    $ 1,869.33 USD
    Free Shipping on orders $49 and up
    $ 1,869.33 USD
    Free Shipping on orders $49 and up
    Are your factory N54 turbos plagued by the dreaded wastegate rattle, or worse, starting to blow smoke? Don't just replace them—upgrade your ultimate driving machine with the ultimate DIY refresh kit.
    Show More Show Less
    WPC Performance Rod Bearing Replacement Kit - Dry
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:57267800
    Part#: 11247838088DKT
    In Stock
    New Item
    $ 993.83 USD
    Free Shipping on orders $49 and up

    Packaged by Turner - Corporate Logo
    T#:401689
    Part#: OILTEMPGAUGEBRKK
    Back Ordered
    Sale - Save 2% $ 196.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 193.26 USD
    Free Shipping
    Sale - Save 2%
    $ 196.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 193.26 USD
    Free Shipping
    The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well.
    Show More Show Less
    Complete Fuel Injector Set
    10X Entries Into Our F80 M3 Sweepstakes
    Packaged by Turner - Corporate Logo
    T#:15677494
    Part#: 13537528539-KT
    Back Ordered
    Sale - Save 3% $ 876.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 849.89 USD
    Free Shipping on orders $49 and up
    Sale - Save 3%
    $ 876.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 849.89 USD
    Free Shipping on orders $49 and up
    A vehicle with dirty injectors may host a wide variety of symptoms. From stalling, hesitation, misfiring, and a rough idle, to the wide open throttle woes. If your vehicle is suffering from these symptoms, the fuel injectors may be the cause.
    Show More Show Less

    Low-Temperature N54 Oil Thermostat Overhaul Kit
    10X Entries Into Our F80 M3 Sweepstakes
    For 2006-2007 models only
    Packaged by Turner - Corporate Logo
    T#:26705005
    Part#: 090766ECS09KT2
    Back Ordered
    Sale - Save 9% $ 245.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 223.36 USD
    Free Shipping on orders $49 and up
    Sale - Save 9%
    $ 245.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 223.36 USD
    Free Shipping on orders $49 and up

    Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

    High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

    Show More Show Less

    Low-Temperature N54 Oil Thermostat Overhaul Kit
    10X Entries Into Our F80 M3 Sweepstakes
    For 2008+ models only
    Packaged by Turner - Corporate Logo
    T#:26705034
    Part#: 090743ECS09KT2
    Back Ordered
    Sale - Save 9% $ 249.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 226.76 USD
    Free Shipping on orders $49 and up
    Sale - Save 9%
    $ 249.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 226.76 USD
    Free Shipping on orders $49 and up

    Ensure optimal performance and longevity for your BMW N54 engine with this comprehensive upgrade kit assembled by enthusiasts at Turner Motorsport!

    High-performance low-temp oil thermostat for superior cooling efficiency Anodized aluminum oil thermostat shaft ensures durability and surface protection Premium quality thermostat spring and bung for reliable operation Anodized thermostat cover with external fins maximizes cooling effectiveness Complete installation kit includes gasket and hardware for hassle-free setup Includes Liqui Moly Special-Tec LL 5W-30 oil, new oil filter, filter housing gasket, and drain plug for a complete service Elevate your N54's cooling system and maintain optimal oil temperatures between 194F and 230F with this all-inclusive upgrade kit.

    Show More Show Less