BMW Engine Parts for BMW 5 Series E60 (2004-2010)

OEM Rein Oil Pan Bolt Set - M54 N52 N54 N55

2X Entries Into Our F80 M3 Sweepstakes

T#:379282

Part#: 11132210959

In Stock

Sale - Save 5% $ 44.89

This product was last offered at the strikethrough price on
08-31-2026

$ 42.65 USD

Add to Wish List

Qty

Sale - Save 5%

$ 44.89

This product was last offered at the strikethrough price on
08-31-2026

$ 42.65 USD

Add to Wish List

This is a replacement set of bolts for the oil pan on your BMW equipped with an M54, N52, N54, or N55. The stock bolts are easy to strip, break, or even lose. Replace your missing or damaged bolts with all new hardware from OEM Rein to ensure a tight seal all around your oil pan and prevent oil leaks.

Check fitment with our guide above to ensure these are the oil pan bolts required for your vehicle.

Show More Show Less

BMS N54 Upgraded Replacement PCV Valve For BMW

T#:38587650

Part#: N54PCVVR

In Stock

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.

Show More Show Less

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

Billet Oil Filter Cap

T#:21045489

Part#: BMS-OFC

In Stock

Starting at $ 89.00 USD

Add to Wish List

Starting at $ 89.00 USD

Add to Wish List

The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA

Show More Show Less

Port Injector Plugs

T#:27171925

Part#: UNI-BMS-PIPLUGS

In Stock

$ 60.00 USD

Add to Wish List

Qty

$ 60.00 USD

Add to Wish List

These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.

Show More Show Less

Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...

T#:34885402

Part#: 4BAR TMAP

Back Ordered

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

Spark Plug Gapper Tool BMS Billet

T#:26404907

Part#: 12MMSPG

In Stock

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

BMW N54 3.0L Blow-By Vent Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:594297

Part#: 11157553949

In Stock

Sale - Save 5% $ 40.99

This product was last offered at the strikethrough price on
08-31-2026

$ 38.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 40.99

This product was last offered at the strikethrough price on
08-31-2026

$ 38.94 USD

Add to Wish List

This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Show More Show Less

Rein Oil Pan Gasket - E34, E36, E39, E46, E53, E60, E61, Z3

2X Entries Into Our F80 M3 Sweepstakes

T#:370783

Part#: 11131437237

In Stock

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
08-31-2026

$ 27.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
08-31-2026

$ 27.54 USD

Add to Wish List

Metal / Rubber gasket

Rein Rear Crankshaft Seal - E30, E32, E34, E36, E39, E46, E53, E60, E...

2X Entries Into Our F80 M3 Sweepstakes

T#:361056

Part#: 11142249533

In Stock at Vendor

Sale - Save 5% $ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Replace when doing a clutch job.

OEM Rein Valve Cover Assembly - BMW N52

2X Entries Into Our F80 M3 Sweepstakes

T#:45997479

Part#: VCE0102

In Stock

Sale - Save 19% $ 292.99

This product was last offered at the strikethrough price on
04-26-2026

$ 235.93 USD

Add to Wish List

Qty

Sale - Save 19%

$ 292.99

This product was last offered at the strikethrough price on
04-26-2026

$ 235.93 USD

Add to Wish List

Rein OE Quality valve covers are designed and manufactured to be direct replacements for OE units. Rein valve covers have identical dimensions as genuine valve covers. Rein valve covers are manufactured to strict engineering standards using high quality materials to prevent leaks and warping.

Show More Show Less

OEM Rein Front Turbo Oil Feed Line - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:402123

Part#: 11427562797

In Stock

Sale - Save 5% $ 39.99

This product was last offered at the strikethrough price on
08-31-2026

$ 37.99 USD

Add to Wish List

Qty

Sale - Save 5%

$ 39.99

This product was last offered at the strikethrough price on
08-31-2026

$ 37.99 USD

Add to Wish List

This is the oil line responsible for supplying oil to the front turbocharger. When these lines leak, they leak profusely, so be sure and replace them any time a leak starts.

Rein Water Pump Pulley - E39, E46, E53, E60, E83, Z3, Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:591711

Part#: 11511436590

In Stock

Sale - Save 5% $ 50.99

This product was last offered at the strikethrough price on
08-31-2026

$ 48.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 50.99

This product was last offered at the strikethrough price on
08-31-2026

$ 48.44 USD

Add to Wish List

A common failing piece due to the plastic design.

Rein VANOS Oil Feed Line - E36, E39, E46, E53, E60, E83, Z3, Z4 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:4471

Part#: 11361705532

Ships on Sep 21, 2026

Sale - Save 17% $ 61.99

This product was last offered at the strikethrough price on
06-04-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 17%

$ 61.99

This product was last offered at the strikethrough price on
06-04-2026

$ 51.29 USD

Add to Wish List

This oil pipe hose runs from the VAN0S adjusting unit to the oil filter housing. At some point the rubber line shrinks or cracks and oil can weep out of the swedge fittings. The fittings at the banjo bolts can also leak so replacing the seals for each banjo fitting is strongly recommended.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3 3.2
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

Show More Show Less

Improved Racing BMW Oil Cooler Thermostat (180F)

T#:27171935

Part#: IRTHERM

Back Ordered

Starting at $ 318.99 USD

Add to Wish List

Starting at $ 318.99 USD

Add to Wish List

Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.

Show More Show Less

Rein Crank Case Vent Hose - E60, E82, E83, E88, E90, E91, E92, E93, Z...

2X Entries Into Our F80 M3 Sweepstakes

T#:402018

Part#: 11157559528

In Stock

Sale - Save 5% $ 48.99

This product was last offered at the strikethrough price on
08-31-2026

$ 46.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 48.99

This product was last offered at the strikethrough price on
08-31-2026

$ 46.54 USD

Add to Wish List

Over time this hose can become clogged and blocked up causing running problems. This is a direct factory replacement for the PCV hose.

Rein Turbo Water Return Line - Front Turbo

2X Entries Into Our F80 M3 Sweepstakes

T#:17771577

Part#: 11537558900

In Stock

Sale - Save 5% $ 60.99

This product was last offered at the strikethrough price on
08-31-2026

$ 57.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 60.99

This product was last offered at the strikethrough price on
08-31-2026

$ 57.94 USD

Add to Wish List

Rein hoses are resistant to excessive heat, oil, and ozone factors that break down rubber and cause premature failure.

Rein Crankcase Vent Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:17804807

Part#: 11157522931

In Stock

Sale - Save 18% $ 44.99

This product was last offered at the strikethrough price on
08-23-2026

$ 37.04 USD

Add to Wish List

Qty

Sale - Save 18%

$ 44.99

This product was last offered at the strikethrough price on
08-23-2026

$ 37.04 USD

Add to Wish List

Manufactured with high-quality materials to withstand heat, dirt, oil, and other debris.

OEM Rein High Pressure Fuel Pipe - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:45997482

Part#: RFP0007

In Stock

Sale - Save 6% $ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 50.49 USD

Add to Wish List

Qty

Sale - Save 6%

$ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 50.49 USD

Add to Wish List

If the high-pressure fuel line connecting your fuel pump to the fuel rail is missing or damaged, replace it with this OEM Rein pipe.

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

For use with converted single turbo N54 engines

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Billet Spark Plug Gapper Tool - 14mm - BMS

T#:583132

Part#: BMSBSPGT14MM

Ships in 8 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

Precisely gaps spark plugs for enhanced engine performance and efficiency
Speeds up the gapping process while ensuring accuracy and uniformity
Available in two sizes (14mm and 12mm) for a wider range of compatibility
Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
Made in the USA for premium quality and durability

Show More Show Less

OEM Rein Forward Turbo Water Feed Line - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:402119

Part#: 11537558899

In Stock

Sale - Save 5% $ 49.99

This product was last offered at the strikethrough price on
08-31-2026

$ 47.49 USD

Add to Wish List

Qty

Sale - Save 5%

$ 49.99

This product was last offered at the strikethrough price on
08-31-2026

$ 47.49 USD

Add to Wish List

A leaking water feed line can create a serious problem in turbo engines. Be sure to fix any leaks immediately.

Rein Turbo Oil Drain Line - Rear Turbo

2X Entries Into Our F80 M3 Sweepstakes

T#:402124

Part#: 11427562800

In Stock

Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 51.29 USD

Add to Wish List

Carries oil away from the rear turbocharger

Rein Turbo Water Feed Line - Rear Turbo - N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:1653147

Part#: 11537558901

In Stock

Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 51.29 USD

Add to Wish List

Qty

Sale - Save 5%

$ 53.99

This product was last offered at the strikethrough price on
08-31-2026

$ 51.29 USD

Add to Wish List

Feeds coolant to the turbo system. This item fits the following BMW Chassis: E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02 Fits BMW Engines including: N54,N54T

Blue Thermostat Caps (pair)

T#:54139632

Part#: BMS-TCP-BLU

Ships in 2 Business Days

$ 29.00 USD

Add to Wish List

Qty

$ 29.00 USD

Add to Wish List

Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...

T#:599636

Part#: TYPEA4BARADAPTER

Ships in 3 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - F23 235i Conve...

T#:5567062

Part#: OCCN55-235VERT

Ships on Sep 21, 2026

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)

Show More Show Less

Billet Oil Thermostat Lid

T#:21045480

Part#: BMS-TLID

Ships in 1 Business Day

Starting at $ 39.00 USD

Add to Wish List

Starting at $ 39.00 USD

Add to Wish List

These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.

Show More Show Less

Dual BMS Turbo Double Baffled Oil Catch Can Kit - Vac & Boost Side - ...

T#:21045512

Part#: BDCC-N54-535

Ships on Sep 21, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum

Show More Show Less

Rein Turbocharger Vacuum Reservoir - E chassis - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:53856273

Part#: 11652247620

Back Ordered

Sale - Save 8% $ 26.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.74 USD

Add to Wish List

Qty

Sale - Save 8%

$ 26.99

This product was last offered at the strikethrough price on
08-31-2026

$ 24.74 USD

Add to Wish List

The Rein Automotive OE Series vacuum reservoir is engineered to maintain peak pneumatic response within your vehicle’s forced induction system.

Upper Oil Separator Vent Tube

2X Entries Into Our F80 M3 Sweepstakes

T#:378292

Part#: 11617504535

Ships in 2 Business Days

Sale - Save 5% $ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Qty

Sale - Save 5%

$ 22.99

This product was last offered at the strikethrough price on
08-31-2026

$ 21.84 USD

Add to Wish List

Runs from the top of the oil separator up to intake manifold.

OEM Rein Oil Separator Vent Hose - E60/61 E90/91 Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:13029

Part#: 11617559530

Ships in 4 Business Days

Sale - Save 38% $ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 41.79 USD

Add to Wish List

Qty

Sale - Save 38%

$ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 41.79 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Show More Show Less

Upper Oil Separator Vent Tube

2X Entries Into Our F80 M3 Sweepstakes

T#:552486

Part#: 11617533399

Ships in 1-2 days

Sale - Save 5% $ 35.99

This product was last offered at the strikethrough price on
08-31-2026

$ 34.19 USD

Add to Wish List

Qty

Sale - Save 5%

$ 35.99

This product was last offered at the strikethrough price on
08-31-2026

$ 34.19 USD

Add to Wish List

Runs from the top of the oil separator up to rear of the intake manifold.

Billet Upgraded Vacuum Cannisters

T#:21045535

Part#: BMS-N54VACANS

Back Ordered

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

N54 powered BMW vehicles have two of these tanks, one for each turbo. They accumulate and hold vacuum/air to be used on both turbos. The factory plastic N54 boost vacuum tanks tend to leak and cause problems. If vacuum can't be stored the wastegates will not function, leading to common low boost or overboost faults. We have the solution, the all-new heavy-duty BMS tanks. Specifically made for stock to high-boost N54 engines. Each tank is made from 100% aluminum and features two CNC machined aluminum end caps and are anodized black to complement your engine compartment. Featuring BMS logos, metal barbed vacuum fittings, and integrated brackets for solid mounting in the factory location. Not only do these look awesome under the hood, but they will also last forever. Replaces OEM BMW part #11652247620 Features & Benefits Full lightweight aluminum construction Heavy-duty upgrade Factory-like fit Sold in pairs Made in the USA

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Vibration Damper

2X Entries Into Our F80 M3 Sweepstakes

T#:38161721

Part#: 11237513862

Ships in 4 Business Days

Sale - Save 5% $ 92.99

This product was last offered at the strikethrough price on
08-31-2026

$ 88.34 USD

Add to Wish List

Qty

Sale - Save 5%

$ 92.99

This product was last offered at the strikethrough price on
08-31-2026

$ 88.34 USD

Add to Wish List

OEM Rein VANOS Adjuster Bolt - BMW N52 N54 N55 S55

2X Entries Into Our F80 M3 Sweepstakes

T#:45791744

Part#: 11367524954

Ships in 3 Business Days

Sale - Save 6% $ 8.99

This product was last offered at the strikethrough price on
08-31-2026

$ 8.45 USD

Add to Wish List

Qty

Sale - Save 6%

$ 8.99

This product was last offered at the strikethrough price on
08-31-2026

$ 8.45 USD

Add to Wish List

The VANOS camshaft adjuster bolt is a single-use item that needs to be replaced any time it is removed. This replacement OEM Rein bolt is the perfect option to get your VANOS system reassembled and your BMW back on the road.

Show More Show Less

Rein Dipstick O-Ring - E36, E39, E46, E53, E60, E83, Z3, Z4

2X Entries Into Our F80 M3 Sweepstakes

T#:6857

Part#: 11431740045

In Stock

Sale - Save 15% $ 7.99

This product was last offered at the strikethrough price on
04-03-2026

$ 6.77 USD

Add to Wish List

Qty

Sale - Save 15%

$ 7.99

This product was last offered at the strikethrough price on
04-03-2026

$ 6.77 USD

Add to Wish List

ENGINE O-RING 11431740045

BMW Crankcase Pressure Regulator Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:46478579

Part#: ABH0263

In Stock

Sale - Save 7% $ 23.99

This product was last offered at the strikethrough price on
08-31-2026

$ 22.35 USD

Add to Wish List

Qty

Sale - Save 7%

$ 23.99

This product was last offered at the strikethrough price on
08-31-2026

$ 22.35 USD

Add to Wish List

BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable.

Show More Show Less

Oil Filler Cap - E90 E92 E60 F10 F01 E83 F25 F70

2X Entries Into Our F80 M3 Sweepstakes

T#:384806

Part#: 11127560482

In Stock

Sale - Save 5% $ 12.99

This product was last offered at the strikethrough price on
08-31-2026

$ 12.34 USD

Add to Wish List

Qty

Sale - Save 5%

$ 12.99

This product was last offered at the strikethrough price on
08-31-2026

$ 12.34 USD

Add to Wish List

This Genuine BMW oil filler cap comes inscribed with "BMW Castrol" and is a direct replacement for many late model BMW's.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2007-2010 E93 BMW 335i 335is - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2008-2010 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

Torx Screw - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:400830

Part#: 11287530315

In Stock

Sale - Save 5% $ 7.92

This product was last offered at the strikethrough price on
08-31-2026

$ 7.52 USD

Add to Wish List

Qty

Sale - Save 5%

$ 7.92

This product was last offered at the strikethrough price on
08-31-2026

$ 7.52 USD

Add to Wish List

Used to mount the drive belt tensioner to the engine block.

OEM Rein Oil Cap - BMW N52 N54 B46/48/58

2X Entries Into Our F80 M3 Sweepstakes

T#:639078

Part#: 11128655331

In Stock

Sale - Save 22% $ 18.59

This product was last offered at the strikethrough price on
08-04-2026

$ 14.52 USD

Add to Wish List

Qty

Sale - Save 22%

$ 18.59

This product was last offered at the strikethrough price on
08-04-2026

$ 14.52 USD

Add to Wish List

This cap is an OEM Rein replacement for your lost or leaking oil cap.

Rein Alternator Mounting Screw Set

2X Entries Into Our F80 M3 Sweepstakes

T#:14795

Part#: 12310392568

Ships in 4 Business Days

Sale - Save 5% $ 20.99

This product was last offered at the strikethrough price on
08-31-2026

$ 19.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 20.99

This product was last offered at the strikethrough price on
08-31-2026

$ 19.94 USD

Add to Wish List

BMW Set Of Alu. Screws Generator -
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N52,N52N

Show More Show Less

Aluminum Cylinder Head Bolt Set

2X Entries Into Our F80 M3 Sweepstakes

T#:594302

Part#: 11120392547

In Stock

Sale - Save 42% $ 12.99

This product was last offered at the strikethrough price on
08-13-2026

$ 7.50 USD

Add to Wish List

Qty

Sale - Save 42%

$ 12.99

This product was last offered at the strikethrough price on
08-13-2026

$ 7.50 USD

Add to Wish List

If you remove your cylinder head replacement head bolts are a must. These bolts are designed to be torqued down and not reused.

OEM Rein Oil Cooler Line O-Ring - Multiple BMWs

2X Entries Into Our F80 M3 Sweepstakes

T#:15159

Part#: 17222245358

In Stock

Sale - Save 19% $ 4.99

This product was last offered at the strikethrough price on
08-31-2026

$ 4.06 USD

Add to Wish List

Qty

Sale - Save 19%

$ 4.99

This product was last offered at the strikethrough price on
08-31-2026

$ 4.06 USD

Add to Wish List

This is the sealing o-ring used for many oil cooler kits on various BMW models. They're also a prime source for oil leaks because the o-ring gets 'flat' or shrinks or becomes damaged. These are usually easy to change though which puts an end to annoying small oil leaks.

Show More Show Less

Oil Pressure Switch (fits most BMWs)

2X Entries Into Our F80 M3 Sweepstakes

T#:363

Part#: 12617568480

In Stock

Sale - Save 41% $ 11.99

This product was last offered at the strikethrough price on
04-21-2026

$ 7.02 USD

Add to Wish List

Qty

Sale - Save 41%

$ 11.99

This product was last offered at the strikethrough price on
04-21-2026

$ 7.02 USD

Add to Wish List

Having your oil pressure light come on can mean very serious problems. Or it could just be this switch that fails several times over a car's lifespan. By no means should you ignore the warning light but replacing this sensor could be the actual culprit. The other problem with this switch is that oil can leak past its seal. With the oil under a lot of pressure at this point, the oil loss can be a serious concern. It's a simple replacement when doing most oil change work.

This Oil Pressure Switch fits the following BMWs:
1985-1991 E30 318i, 318is, 325e, 325i, M3
1992-1999 E36 318i/is, 325i/is, 328i/is, 323is, M3
1992-1997 E31 840i, 850i
1988-1994 E32 735i, 735iL, 740i, 740iL
1989-1995 E34 525i, 530i, 535i, 540i, M5
1995-2001 E38 740i, 740iL, 750i, 750iL
1996-2002 Z3 Roadster/Coupe 1.9, 2.3, 2.5, 2.8, 3.0, 3.2
1997-2003 E39 525i, 528i, 530i, 540i, M5
1999-2005 E46 323, 325, 328, 330, M3
2000-2003 Z8 roadster
2001-2006 E53 X5 X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
2002+ E65/E66 745i, 745li, 750i, 750li, 760i, B7 Alpina
2003+ Z4 Roadster/Coupe Z4 2.5, 3.0, 3.0si
2004+ E60 525i, 530i, 535i, 545i, 550i, M5
2005+ E63/E64 645Ci, 650i, M6
2005+ E83 X3 X3 2.5, X3 3.0
2006+ E90/E92 325, 328, 330, 335
2007+ E70 X5 X5 3.0i, X5 4.8i

Show More Show Less

OEM Rein Camshaft / Crankshaft Sensor O-Ring - Multiple BMWs ...

Cam sensor - intake or exhaust side

2X Entries Into Our F80 M3 Sweepstakes

T#:12463

Part#: 12141748398

Ships in 2 Business Days

Sale - Save 48% $ 4.99

This product was last offered at the strikethrough price on
06-29-2026

$ 2.61 USD

Add to Wish List

Qty

Sale - Save 48%

$ 4.99

This product was last offered at the strikethrough price on
06-29-2026

$ 2.61 USD

Add to Wish List

This is the o-ring used for most BMW camshaft sensors and crankshaft sensors. Although most sensors that we sell come with this o-ring at no charge, they may be the source of oil or fluid leaks.