BMW Engine Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:38587650
Part#: N54PCVVR
Back Ordered
$ 40.00 USD
Free Shipping on orders $49 and up
The BMS N54 Upgraded Replacement PCV Valve is a high-performance upgrade designed to enhance crankcase ventilation and minimize excessive blow-by in BMW N54 engines. Unlike the stock PCV valve, which can degrade over time and lead to oil consumption or boost leaks, this upgraded version provides superior sealing and long-term durability. ### Key Features: - **Direct-Fit Replacement** – Designed for an exact fit, ensuring hassle-free installation. - **Optimized Ventilation** – Improves crankcase pressure management, reducing oil blow-by and deposits. - **Enhanced Durability** – Constructed from premium materials to withstand high-boost applications and prolonged use. - **Boost Leak Prevention** – Delivers a tighter seal than the factory valve, preventing power loss. - **Ideal for Tuned Engines** – A critical upgrade for N54-powered vehicles running increased boost levels. Upgrade your N54’s crankcase ventilation system with the BMS Upgraded PCV Valve to ensure maximum performance, reliability, and engine longevity.
Show More Show Less
Ina - Corporate Logo
T#:2045
Part#: 11281748131
In Stock
$ 20.25 USD
Free Shipping on orders $49 and up
$ 20.25 USD
Free Shipping on orders $49 and up

This is an OEM INA tensioner pulley, also known as the adjusting pulley and lower pulley. This pulley is mounted on the belt tensioner near the center of the belt assembly. The upper and lower pulleys are known to be the primary sources for 'belt squealing'. This pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

This pulley is mounted along with the hydraulic belt tensioner but can be replaced on its own. It is used for the main drive belt on the M50-M54 family engines (M50, M50TU, M52, S52, M52TU, M54, M56, and S54 engines). This is the same belt that covers the water pump/alternator/power steering systems. Replacement is a very easy procedure (requires fan removal) and will have your engine purring in no time. Belt replacement is strongly recommended at the same time. If you have a mechanical belt tensioner, the pulley can only be replaced with a new tensioner.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

If you need the hydraulic belt tensioner, click here.

This item is 70mm Diameter. Please check the diameter before ordering.

This tensioner pulley fits the following BMWs:
1991-1995 E34 525i (M50 engine)
1992-1999 E36 325i, 325is, 328i, 328is, 323is
1995-1999 E36 M3 (M3 3.0 & M3 3.2 liter)
1997-2003 E39 525i, 528i, 530i - Only for Hydraulic Tensioner
1999-2000 E46 323i, 323Ci, 328i, 328Ci - Only for Hydraulic Tensioner
2001-2005 E46 325i, 325Ci, 325xi, 330i, 330Ci, 330xi - Only for Hydraulic Tensioner
2001-2006 E46 M3 coupe & convertible - Only for Hydraulic Tensioner
2000-2006 X5 3.0 liter (E53 chassis)
2004 E60 525i, 530i (M54 engine)
1997-2002 Z3 & MZ3 2.5, 2.8, 3.0, M Roadster, M Coupe
2003-2009 Z4 M Coupe and Roadster

Show More Show Less
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
Ships in 1-2 days
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
Ships in 1 Business Day
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
Back Ordered
$ 139.99 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

Atlantic Automotive Engineering - Corporate Logo
T#:42200953
Part#: 13517616170RKT
Back Ordered
$ 816.99 USD
Free Shipping on orders $49 and up
$ 816.99 USD
Free Shipping on orders $49 and up
This is the updated high pressure fuel pump for BMW's with the N54 or N55 turbo engine. The high-pressure fuel pump is a known weak point on the N54 and N55 engines and can cause limp mode or even leave you stranded if it fails. This is the latest and most current version of the fuel pump offered. Common symptoms of a failing pump include rough idle, engine misfires, sudden loss of power, or failure to start. If your vehicle still has an earlier revision of the pump, especially if it's modified or will be in the future, this is a worthwhile upgrade for improved reliability. Included in the retail price is a refundable $130 core charge.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Fuel Pump Cam Follower - BMW/MINI B46 B48 B58
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:39768327
Part#: 06H109311B
In Stock
$ 29.99

This product was last offered at the strikethrough price on
09-02-2026

$ 28.95 USD
Free Shipping on orders $49 and up
$ 28.95 USD
Free Shipping on orders $49 and up

Ina - Corporate Logo
T#:19307
Part#: 11287556251
In Stock
$ 40.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
OEM INA Idler / Deflection Pulley - E9x E82 E83 E60 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:12945
Part#: 11287535860
In Stock
$ 23.28 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. �All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


For cars with the N52 6 cylinder engine.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2007-2010 E70 BMW X5 3.0si
2007-2010 E83 BMW X3 3.0i X3 3.0si

Show More Show Less
Ina - Corporate Logo
T#:403662
Part#: 11311738700
In Stock
$ 56.20

This product was last offered at the strikethrough price on
07-23-2026

$ 47.99 USD
Free Shipping on orders $49 and up
$ 47.99 USD
Free Shipping on orders $49 and up
Guide used to tension the timing chain


OEM INA Deflection Pulley -- N62 E60/1 E63/4 E65/6/7 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362736
Part#: 11287549557
In Stock
$ 30.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:19306
Part#: 11287557851
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011 E82 BMW 1M Coupe
2006-2010 E90 BMW335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i 335is - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive

Show More Show Less
Ina - Corporate Logo
T#:42301978
Part#: ZC0286
In Stock
$ 26.99 USD
Free Shipping on orders $49 and up
Turner Motorsport offers this genuine OEM INA Engine Timing Chain (Upper) as a reliable solution to maintain BMW engine integrity and performance, ensuring your vehicle runs like new.

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...
For use with converted single turbo N54 engines
Burger Motorsports - Corporate Logo
T#:23880741
Part#: N54STCCPBO
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
$ 30.00 USD
Free Shipping on orders $49 and up
If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.
Show More Show Less

Ina - Corporate Logo
T#:377083
Part#: 12317560483
Ships in 3 Business Days
$ 63.99

This product was last offered at the strikethrough price on
09-29-2026

$ 61.60 USD
Free Shipping on orders $49 and up
$ 61.60 USD
Free Shipping on orders $49 and up

This is an OEM INA alternator pulley. Keep your belt drive system in top shape with this new pulley.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less

Ina - Corporate Logo
T#:361801
Part#: 11287549588
Ships in 1-2 days
$ 69.68 USD
Free Shipping on orders $49 and up

This is an OEM INA Water Pump Belt Tensioner. It provides pressure to the Water Pump/Alternator Belt to assure maximum performance out of the water pump and alternator and prevent the belt from slipping causing reduced cooling and lower charge output from the alternator.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less
Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 7 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less

Ina - Corporate Logo
T#:11808
Part#: 11287512758
In Stock
$ 56.99 USD
Free Shipping on orders $49 and up
$ 56.99 USD
Free Shipping on orders $49 and up
This is an OEM INA mechanical tensioner for 2003+ BMW's with the M54 or M56 engine. These belt tensioner units are known to fail, and include the tensioner pulley (as shown). OEM Schaeffler (INA, LuK, Ruville, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high-quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Ina - Corporate Logo
T#:42301983
Part#: ZC0219
In Stock
$ 80.99

This product was last offered at the strikethrough price on
06-29-2026

$ 62.99 USD
Free Shipping on orders $49 and up
$ 62.99 USD
Free Shipping on orders $49 and up
Ensure your BMW runs like new with the precision and durability of this OEM INA timing chain - engineered for performance, built for reliability.
Ina - Corporate Logo
T#:42301980
Part#: ZC0255
Ships in 2 Business Days
$ 41.99 USD
Free Shipping on orders $49 and up
Preserve the performance and longevity of your BMW with the OEM INA Engine Timing Chain. Timing chains stretch over time causing sluggish performance, a check engine light or even a misfire. Replace yours today!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:54139632
Part#: BMS-TCP-BLU
Ships in 1 Business Day
New Item
$ 29.00 USD
Free Shipping on orders $49 and up


Burger Motorsports - Corporate Logo
T#:5567062
Part#: OCCN55-235VERT
Ships on Oct 27, 2026
$ 199.00 USD
Free Shipping on orders $49 and up
It's no secret that BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Large 16mm+ inlet and outlet exceeds OEM PCV sizing Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Precision CNC Machined from Solid Blocks of High Grade Aluminum DIMENSIONS Can dimensions with lid: 4.4" (111mm) Tall Can Diameter: 2.7" (68.5mm) Lid Length: Back to nozzle end: 4" (101mm) Nozzle Outer Diameter: .75" (19.2mm) Nozzle Inner Diameter: 0.669" (17mm) Can Capacity: 2.5 oz (74 ml)
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045480
Part#: BMS-TLID
In Stock
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
Starting at $ 39.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045512
Part#: BDCC-N54-535
Ships on Oct 27, 2026
$ 399.00 USD
Free Shipping on orders $49 and up
It's no secret that the N54 BMW turbo motors suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The BMS N54 oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor / ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoe horned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Vacuum Side The BMS vacuum side N54 OCC works in conjunction with the world-famous boost side N54 oil catch can to prevent engine oil and PCV gunk from coating your intake valves and hurting engine efficiency under engine vacuum operation. Our boost side OCC separates oil traveling through the PCV while the engine is operating under boost pressure (e.g. heavy throttle) and our vacuum side OCC separates oil traveling through the PCV while the engine is operating under vacuum (idle and low throttle). When used together they provide the ultimate protection keeping oil from coating your intake ports and valves during all phases of engine operation! The unique PCV adapter design does not require you to permanently cap/plug your PCV holes! Includes a high performance check valve that attaches directly to the vacuum source eliminating boost leaks within the system and also includes quick connect fittings and 3/8” hose for quick, easy, and clean installation. The full vacuum side kit includes a BMS double baffle OCC which mounts on the strut brace right next to your BMS boost side OCC for a clean look and easy service. The full kit also includes our BOV adapter providing an extra 1/8" NPT vacuum port source. Note a BOV is not required to run this kit. This kit eliminates the need for a separate RB PCV or BMS PCV. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum N54 Model Mounts Out of Sight Under the Cowl Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High Grade Aluminum
Show More Show Less

Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less

Ina - Corporate Logo
T#:42301973
Part#: ZG0158
Ships in 7 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Located at the top of your timing chain system, this slide rail guides your timing chain, preventing rattling and ensuring proper alignment of the timing chain and sprockets. Over time, these rails can wear out, allowing for excessive play in the chain. If left unaddressed, this guide can become brittle, leading to cracking or complete failure.
Show More Show Less
Ina - Corporate Logo
T#:42302003
Part#: ZC-76349S
Ships in 7 Business Days
$ 474.99 USD
Free Shipping on orders $49 and up
For BMW owners seeking dependable timing performance and factory-level precision, the OEM INA Engine Timing Set from Turner Motorsport delivers unmatched reliability and peace of mind.

Alternator Pulley - E82 E90 E92 E60
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19332
Part#: 12317570152
Ships in 3 Business Days
$ 66.99 USD
Free Shipping on orders $49 and up
This OEM alternator pulley has a ratcheting mechanism inside that can wear out, causing a rattling sound. This mechanism allows the alternator to freewheel to a degree. This is only for the Valeo brand alternator/

This item fits the following BMWs:
2008+ E82 BMW 128i with N51 engine
2006-2007 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2007 E90 BMW 328i 328xi - Sedan with N51 engine
2006-2007 E91 BMW 325xi - Wagon
2007-2007 E92 BMW 328i 328xi 328i xDrive - Coupe with N51 engine
2006-2007 E60 BMW 525i 525xi 530i 530xi
Show More Show Less
OEM INA Alternator Pulley -- E88 E82 E9X E60/1 E70
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:377096
Part#: 12317560678
Ships in 3 Business Days
$ 67.99 USD
Free Shipping on orders $49 and up

This is an OEM INA alternator pulley. Keep your belt drive system in top shape with this new pulley.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

OEM INA BMW Deflection Pulley -- E60/1 E65/6 E83
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:22236
Part#: 11287516847
Ships in 1-2 days
$ 41.07 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc). OEM replacement for BMW part # 11287516847

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
BMW 5 Series - 525i, 530i
BMW X Series - X3 2.5i, X3 3.0i

--.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting
For use with converted single turbo N54 engines
Burger Motorsports - Corporate Logo
T#:23880740
Part#: N54STCOCF
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
$ 25.00 USD
Free Shipping on orders $49 and up
Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045535
Part#: BMS-N54VACANS
Back Ordered
$ 199.00 USD
Free Shipping on orders $49 and up
N54 powered BMW vehicles have two of these tanks, one for each turbo. They accumulate and hold vacuum/air to be used on both turbos. The factory plastic N54 boost vacuum tanks tend to leak and cause problems. If vacuum can't be stored the wastegates will not function, leading to common low boost or overboost faults. We have the solution, the all-new heavy-duty BMS tanks. Specifically made for stock to high-boost N54 engines. Each tank is made from 100% aluminum and features two CNC machined aluminum end caps and are anodized black to complement your engine compartment. Featuring BMS logos, metal barbed vacuum fittings, and integrated brackets for solid mounting in the factory location. Not only do these look awesome under the hood, but they will also last forever. Replaces OEM BMW part #11652247620 Features & Benefits Full lightweight aluminum construction Heavy-duty upgrade Factory-like fit Sold in pairs Made in the USA
Show More Show Less
Ina - Corporate Logo
T#:393585
Part#: 12311713153
Ships in 6 Business Days
$ 10.99 USD
Free Shipping on orders $49 and up

The OEM INA Tensioner Bearing allows the belt tensioner arm to rotate and apply pressure to the serpentine belt. With a bad bearing, the arm may seize up and prevent the tensioner from working properly.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

Show More Show Less


OEM Ina Intake Hydraulic Tappet - BMW N52 N54 N55 N20 S55
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:591661
Part#: 11337548690
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Hydraulic valve lifter
OEM INA Idler Pulley - Multiple BMWs
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:1626
Part#: 11287841228
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up
$ 18.99 USD
Free Shipping on orders $49 and up
This is an OEM INA Upper Idler Pulley, also known as the roller pulley or deflection pulley. The upper and lower idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).
Show More Show Less
OEM INA Hydraulic Lifter - BMW M5X S5X M62 S62
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:360996
Part#: 11321748884
In Stock
$ 19.99 USD
Free Shipping on orders $49 and up
Stock replacement hydraulic valve lifter for the M52, M54 and S50 S52 engines. These lifter buckets can last 150,000+ miles but then they no longer fit on the valve stem correctly and a ticking or knocking noise can result. If the lifter is no longer seated correctly, it can lead to the valve not opening correctly. Replacement is straight-forward but requires special tools for working with the camshafts. This item fits the following BMWs:
1995-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-2003 E39 BMW 525i 528i 530i M5
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 E36/7 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
1998-2000 E36/7 BMW M Roadster M Coupe
Show More Show Less

Ina - Corporate Logo
T#:596290
Part#: 11337605330
In Stock
$ 9.99 USD
Free Shipping on orders $49 and up
If your BMW has noisy or stuck lifters, replace them to improve performance and stop the annoying chatter

Atlantic Automotive Engineering - Corporate Logo
T#:45757468
Part#: 32427516620
In Stock at Vendor
$ 42.99 USD
Free Shipping on orders $49 and up
A new power steering pulley is key to keeping your steering system smooth and reliable. Over time, pulleys can warp, crack, or wear, causing belt slippage, whining noises, or even pump failure. Installing a fresh pulley restores correct belt alignment, eliminates noise, and maintains consistent hydraulic pressure for precise, effortless steering. Why choose a new pulley? Smooth operation – Ensures proper belt tension for dependable pump performance. Noise reduction – Eliminates squealing, whining, or vibration from worn pulleys. System protection – Protects the pump and steering components from damage. Install a new pulley and keep your steering system running quietly, efficiently, and confidently.
Show More Show Less
Atlantic Automotive Engineering - Corporate Logo
T#:45757465
Part#: 32427558757
In Stock at Vendor
$ 42.99 USD
Free Shipping on orders $49 and up
A new power steering pulley is key to keeping your steering system smooth and reliable. Over time, pulleys can warp, crack, or wear, causing belt slippage, whining noises, or even pump failure. Installing a fresh pulley restores correct belt alignment, eliminates noise, and maintains consistent hydraulic pressure for precise, effortless steering. Why choose a new pulley? Smooth operation – Ensures proper belt tension for dependable pump performance. Noise reduction – Eliminates squealing, whining, or vibration from worn pulleys. System protection – Protects the pump and steering components from damage. Install a new pulley and keep your steering system running quietly, efficiently, and confidently.
Show More Show Less

Timing Chain Kit
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:14155768
Part#: ZC01433K
Ships in 7 Business Days
$ 594.99 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:21045481
Part#: BMS-TCP
Ships in 1 Business Day
Starting at $ 29.00 USD
Free Shipping on orders $49 and up
Starting at $ 29.00 USD
Free Shipping on orders $49 and up
These billet CNC replacement aluminum oil thermostat lids and caps are an excellent way to add some color and style to your N54 N55 S55 engine bay. Anodized black, red or blue. Easy to install and made in the USA. Can be used with or without the BMS Sport Oil Cooler Valve.
Show More Show Less

Ina - Corporate Logo
T#:41492602
Part#: 11337559797
In Stock
$ 22.99 USD
Free Shipping on orders $49 and up
$ 22.99 USD
Free Shipping on orders $49 and up
Rocker arms work in conjunction with your camshafts and valves, applying pressure from the camshaft to open and close your intake and exhaust valves. If your rocker arm rollers have failed, this can lead to extreme camshaft damage, requiring the camshaft to be replaced. Replace your rockers whenever servicing your camshafts or replacing your hydraulic lifters to ensure long-term engine reliability.
Show More Show Less

Ina - Corporate Logo
T#:42301969
Part#: ZG0581
Ships in 7 Business Days
$ 25.99 USD
Free Shipping on orders $49 and up
$ 25.99 USD
Free Shipping on orders $49 and up
This guide is used to provide tension to the timing chain, but it wears over time. These plastic tensioners also become brittle with time and mileage, usually cracking and/or breaking completely. A common sign of worn timing chain components is noise from the timing chain area.
Show More Show Less
Timing Chain Tensioner Rail - Left
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:27372096
Part#: 11317533483
Ships in 1 Business Day
$ 34.99

This product was last offered at the strikethrough price on
05-08-2026

$ 33.99 USD
Free Shipping on orders $49 and up
$ 33.99 USD
Free Shipping on orders $49 and up
Ina - Corporate Logo
T#:42301971
Part#: ZG0243
Ships in 7 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
Used on cylinders 5-8 to provide tension to the timing chain


Ina - Corporate Logo
T#:42301972
Part#: ZG0241
Ships in 7 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
Used on cyilinders 1-4 to provide tension to the timing chain, this guide rail is a key part that needs to be replaced when servicing the timing chain system.
Ina - Corporate Logo
T#:42301982
Part#: ZC0220
Ships in 7 Business Days
$ 95.99 USD
Free Shipping on orders $49 and up
Ensure your BMW stays in peak mechanical condition by replacing the worn, stretched or damaged timing chain on your N52 engine.