BMW Engine Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Vaico - Corporate Logo
T#:34114245
Part#: V20-3674
In Stock
$ 827.99

This product was last offered at the strikethrough price on
05-07-2026

$ 497.99 USD
Free Shipping on orders $49 and up
$ 497.99 USD
Free Shipping on orders $49 and up

If your N52 engine is running rough, is low on power, or you are getting check engine lights for timing related issues, there is a good chance that you have a faulty VANOS component. The two most common parts to fail are the Camshaft Adjusters and VANOS Solenoids.

This repair kit from Vaico includes all of the basic parts necessary to service the VANOS system and restore smooth engine operation.

Included:

Intake Camshaft Adjuster w/ Impulse Wheel

Exhaust Camshaft Adjuster w/ Impulse Wheel

Camshaft Adjuster Bolts

VANOS Solenoid Valves

Valve Cover Gasket Set

Show More Show Less
Cylinder Head Gasket Set
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Elring - Corporate Logo
T#:586981
Part#: 11120392976
In Stock at Vendor
$ 843.49 USD
Free Shipping
$ 843.49 USD
Free Shipping
Performance Tool - Corporate Logo
T#:2242222
Part#: W80572
Ships in 2 Business Days
$ 21.99 USD
Free Shipping on orders $49 and up
Use to install pistons on most passenger cars and truck engines

Elring - Corporate Logo
T#:591538
Part#: 11127548921
In Stock at Vendor
$ 180.98 USD
Free Shipping
$ 180.98 USD
Free Shipping
Restore engine sealing with the Elring 11127548921 BMW N52 top-end gasket set. OEM FKM quality seals for valve cover, valve stem, and Valvetronic motor.

ARP - Corporate Logo
T#:4309
Part#: 100-9942
In Stock at Vendor
$ 216.99

This product was last offered at the strikethrough price on
03-05-2026

$ 202.99 USD
Free Shipping
$ 202.99 USD
Free Shipping
We highly recommend using a stretch gauge when installing rod bolts and other fasteners, where it is possible to measure the length of the fastener.

Febi - Corporate Logo
T#:381781
Part#: 11517504077
In Stock at Vendor
$ 42.99

This product was last offered at the strikethrough price on
05-05-2026

$ 33.38 USD
Free Shipping on orders $49 and up
$ 33.38 USD
Free Shipping on orders $49 and up
Replace your cracked or broken pulley
POR-15 - Corporate Logo
T#:1575841
Part#: POR49216
Ships in 7 Business Days
$ 40.99 USD
Free Shipping on orders $49 and up
POR-15 Fuel Tank Sealer was formulated and developed in our own laboratories due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content.
Show More Show Less

Fuel Injector Clinic - Corporate Logo
T#:6940373
Part#: IS810-0650H
Ships in 2 Business Days
$ 856.00 USD
Free Shipping
$ 856.00 USD
Free Shipping
High performance fuel injectors featuring high impedance Bosch core, E85 compatible, with a lifetime warranty. This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid. A superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability. Every injector is covered against failure caused by defects in original manufacture by a lifetime warranty.
Show More Show Less

Mishimoto - Corporate Logo
T#:5282875
Part#: MMOC-E60-06
In Stock at Vendor
$ 714.99 USD
Free Shipping
$ 714.99 USD
Free Shipping
After over a decade of use, some of the E60 M5 & E63/64 M6 components have begun to show their age. The factory engine oil cooler is a common leak point on the E60, typically from failed O-rings or cracked weld points. In addition, the location of the front-mounted cooler increases the chance of damage from road debris and general clogging of external fins, resulting in reduced cooling efficiency. That, combined with the high-strung engine and hefty chassis, means oil temperatures tend to rise during aggressive driving. That's why Mishimoto's engineering team set out to remedy both issues with this performance oil cooler. Drawing on their vast experience with BMWs and the latest in engineering tools, Mishimoto's team was able to create a direct-fit replacement oil cooler with substantial improvements in both durability and cooling efficiency. The Mishimoto Performance Oil Cooler features a robust bar-and-plate core, which provides improved durability and aids in heat rejection. The core utilizes a strategic fin design which provides a 41% increase in external fin surface area and a 30% increase in internal fin surface area to help draw heat out of the oil and dissipate it into the air. This oil cooler features CNC-machined inlet/outlet ports and includes new OEM O-rings for a seamless and leak-free installation. This cooler is finished in a silver powder coat, ensuring long-term durability and corrosion resistance. And, as with all BMW performance products, this oil cooler includes the signature Mishimoto Lifetime Warranty. Fits 2006-2010 BMW E60 M5 / E63 M6 / E64 M6* (*Requires minor trimming of plastic OEM oil cooler shrouding) Replaces failure-prone factory oil cooler and provides improved cooling performance 40.3% increase in core volume for efficient cooling Robust bar-and-plate core provides improved pressure tolerance and durability 41% increase in external fin surface area for improved heat transfer 30% increase in internal fin surface area draws heat out of oil quickly and efficiently CNC-machined inlet/outlet mates perfectly with stock oil cooler lines Includes OEM oil line O-rings Durable silver powder coated finish provides optimal corrosion resistance Patent Pending Mishimoto Lifetime Warranty Included: Mishimoto Performance Oil Cooler Oil Line O-rings Mishimoto Lifetime Warranty​ WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637700
Part#: IP-A122809
In Stock
$ 1,395.00 USD
Free Shipping on orders $49 and up
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
Ships in 3 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:18733526
Part#: VTT-CRANKHUB-4
Ships on Aug 18, 2026
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
5150 Autosport - Corporate Logo
T#:23416508
Part#: FER-HPVK-S55-T-3
Ships in 4 Business Days
$ 929.99 USD
Free Shipping on orders $49 and up
Increase the power output of your N55/S55 engine with the high-performance Ferrea valve kit. Renowned as the industry's most reliable extreme-duty valves, they're meticulously crafted from aerospace-grade alloys, employing an exclusive two-step slow forging process for optimal grain flow and material structure integrity. A 48-hour heat treatment and stress-relieving process enhance molecular integrity. The valves feature avionics-quality hard chrome and a specially applied hard tip. Standard size: 32mm intake / 28mm exhaust, with a triple groove valve design. Compatible with factory valve locks ("Valve Keepers"), the kit includes 12x Intake Valves and 12x Exhaust Valves for a comprehensive engine upgrade!
Show More Show Less
Victor Reinz - Corporate Logo
T#:369954
Part#: 11127501304
In Stock at Vendor
$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 97.99 USD
Free Shipping on orders $49 and up
$ 97.99 USD
Free Shipping on orders $49 and up
Just the head gasket

SnowPerformance - Corporate Logo
T#:589559
Part#: SNO-40200
Ships in 4 Business Days
$ 74.99 USD
Free Shipping on orders $49 and up
Installs easily for an accurate boost reading every time.

Conti Tech Rubber High-Pressure Hose
We Price Match - Give Us A Call or Chat!
Continental - Corporate Logo
T#:378830
Part#: N0202811
Ships in 4 Business Days
$ 24.93

This product was last offered at the strikethrough price on
05-11-2026

$ 22.80 USD
Free Shipping on orders $49 and up
$ 22.80 USD
Free Shipping on orders $49 and up
7mm O.D X 2.5mm I.D.
Vargas Turbo Technologies - Corporate Logo
T#:557949
Part#: VTTVCOVBCR
Ships in 10 Business Days
Starting at $ 1,448.99 USD
Free Shipping
Starting at $ 1,448.99 USD
Free Shipping

The N54 valve cover, while not a terrible design, has it's share of flaws. Most owners have had to replace this part over time as it can crack for seemingly no reason. Additionally, the stock valve cover has its limitations for vacuum and PCV connectivity. 

VTT is proud to offer a ground-up system designed to give the end user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? Now you can run them any way you want! Including complete VTA, oil cap one-way breather, or whatever else you may need. This i a true solution that solves many plumbing headaches. 

Accessability options aside, this part looks magnificent. CNC Machined and anodized in your choice or Red, Black, or Clear, this valve cover is sure to turn heads!

Details:

  • 100% CNC 6061-T6 Aircraft aluminum construction
  • Anodized in a variety of colors
  • Custom logo available on the cap
  • Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
  • Gives the end user true variety for setting up their Valve Cover and PCV System

This part fits the following BMW engines:
2006-2013 N54



 

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:398498
Part#: VTT-N54-CHRA-1-T
Ships on Aug 18, 2026
$ 808.99 USD
Free Shipping
$ 808.99 USD
Free Shipping
Direct OEM replacements with upgraded TD04 thrust assembly - These are a direct replacement for the factory turbocharger. New or reman bearing housing will be used, reman turbine wheel, reman factory compressor wheel. All brand new internals using the upgraded TD04 thrust assembly.
Show More Show Less
Elring Oil Pan Gasket - E60, E63, E64, E65, E66
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Elring - Corporate Logo
T#:381031
Part#: 11137506774
In Stock at Vendor
$ 38.04 USD
Free Shipping on orders $49 and up
Steel gasket located between your oil pan and engine

Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships on Aug 18, 2026
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less

5150 Autosport - Corporate Logo
T#:31755188
Part#: 5150-TBK-N55-100
Ships in 4 Business Days
$ 6,099.99 USD
$ 6,099.99 USD
The 5150 AutoSport Pro-Series Turbo Build Kit is made for high horsepower and turbocharged performace.
URO Premium - Corporate Logo
T#:1918449
Part#: 11537558900
Ships in 2 Business Days
$ 70.99 USD
Free Shipping
$ 70.99 USD
Free Shipping
Comes with a lifetime warranty
OEM Bosch Remanufactured 180 Amp Alternator - E82/88 E9X E60/61 N54 ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Bosch - Corporate Logo
T#:373812
Part#: 12317558220KT1
Ships in 2 Business Days
$ 1,029.99

This product was last offered at the strikethrough price on
04-10-2026

$ 1,001.99 USD
Free Shipping
$ 1,001.99 USD
Free Shipping
Replace your dead alternator with this new unit and make sure your battery is being charged properly. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their exacting assembly process and high level of durability you can expect a long service life from all Bosch products. Includes a $195.00 core charge to be refunded after we receive your refundable core.
Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:558924
Part#: VTT-N54-CRANKHUB
Ships on Aug 18, 2026
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
Mahle-Behr - Corporate Logo
T#:46774
Part#: 17222282499
Ships in 2 Business Days
$ 779.78

This product was last offered at the strikethrough price on
03-09-2026

$ 779.77 USD
Free Shipping
$ 779.77 USD
Free Shipping
This is the OEM Behr engine oil cooler for E60 M5 and E63 M6 with the S85 V10 engine. On the S85 engine it is critical to keep the oil temperatures as low as possible. Higher oil temperatures can lead to failures of the variable valve timing system and engine bearings. If the cooling capacity of your oil cooler is compromised in any way we recommend replacing the unit to avoid future expensive repairs.

Hailing from Stuttgart, Mahle-Behr specializes in automotive cooling systems. From air conditioning to engine cooling M-B has you covered with OE-quality replacement parts.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6
Show More Show Less
Victor Reinz - Corporate Logo
T#:373816
Part#: 11137548031
In Stock at Vendor
$ 53.99

This product was last offered at the strikethrough price on
05-07-2026

$ 52.99 USD
Free Shipping on orders $49 and up
$ 52.99 USD
Free Shipping on orders $49 and up
Gasket between oil pan and engine block

Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

URO A/C Belt Tensioner Pulley W/ Lever - E60, E63, E64
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:591647
Part#: 11287839135
Ships in 2 Business Days
$ 164.99 USD
Free Shipping
$ 164.99 USD
Free Shipping
Includes belt tensioner pulley & lever
Vargas Turbo Technologies - Corporate Logo
T#:18733527
Part#: VTT-CRANKHUB-2
Ships on Aug 18, 2026
$ 871.99 USD
Free Shipping
$ 871.99 USD
Free Shipping
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Crankshaft Position Sensor
Only fits models produced before 06/2006
Bremi - Corporate Logo
T#:2027109
Part#: 13627639278
Ships in 2 Business Days
$ 45.99

This product was last offered at the strikethrough price on
05-07-2026

$ 40.99 USD
Free Shipping on orders $49 and up
$ 40.99 USD
Free Shipping on orders $49 and up
Genuine BMW Vent Pipe - 11617563477 - E63,E65,E70 X5
For vehicles with a production date from 11/2006+
Genuine BMW - Corporate Logo
T#:36551
Part#: 11617563477
In Stock at Vendor
$ 352.99 USD
Free Shipping
$ 352.99 USD
Free Shipping

Guides crankcase gases back to the intake.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Vent Pipe -
This item fits the following BMW Chassis:
E63,E65,E70 X5

Fits BMW Engines including:
N62N
 

 

Show More Show Less

Victor Reinz Cylinder Head Gasket - E60, E61, E71, E82, E88, E90, E92...
1.52mm (+0.30) thickness - for use with a machined head
Victor Reinz - Corporate Logo
T#:373831
Part#: 11127557266
Ships in 6 Business Days
$ 201.99 USD
Free Shipping
$ 201.99 USD
Free Shipping
.30 thicker than stock

Elring Oil Pan Gasket - E53, E60, E63, E64, E65, E66, E70
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Elring - Corporate Logo
T#:362876
Part#: 11137545293
In Stock
$ 40.92

This product was last offered at the strikethrough price on
07-01-2026

$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Cure your oil leaks
Mahle Motorsports - Corporate Logo
T#:2928993
Part#: 197859542
Ships in 4 Business Days
$ 1,787.99 USD
Free Shipping
$ 1,787.99 USD
Free Shipping
Forged, 4032. Get the performance and reliability your S85 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
FrankenTurbo - Corporate Logo
T#:51391251
Part#: F54TTN54-135
Back Ordered
New Item
$ 1,999.00 USD
$ 1,999.00 USD
The F54 Super-TD04 kit is FrankenTurbo’s "no-compromise" twin-turbo upgrade for N54 owners who want single-turbo power levels with twin-turbo response.


Baum Tools - Corporate Logo
T#:641924
Part#: B117110
Ships in 6 Business Days
$ 414.64 USD
Free Shipping
$ 414.64 USD
Free Shipping
To remove select main springs on the cam system
Ina - Corporate Logo
T#:42302003
Part#: ZC-76349S
Ships in 8 Business Days
$ 474.99 USD
Free Shipping on orders $49 and up
For BMW owners seeking dependable timing performance and factory-level precision, the OEM INA Engine Timing Set from Turner Motorsport delivers unmatched reliability and peace of mind.
Vargas Turbo Technologies - Corporate Logo
T#:22394048
Part#: VTTN54VCOCCBLK
Ships on Aug 18, 2026
$ 2,129.99 USD
Free Shipping
$ 2,129.99 USD
Free Shipping
This convenient kit from Vargas includes everything you need, saving you the hassle of sourcing specific fittings for your valve cover-catch can setup. Spend less time searching and more time enjoying your upgraded system!
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships on Aug 18, 2026
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Ina - Corporate Logo
T#:42301973
Part#: ZG0158
Ships in 8 Business Days
$ 35.99 USD
Free Shipping on orders $49 and up
Located at the top of your timing chain system, this slide rail guides your timing chain, preventing rattling and ensuring proper alignment of the timing chain and sprockets. Over time, these rails can wear out, allowing for excessive play in the chain. If left unaddressed, this guide can become brittle, leading to cracking or complete failure.
Show More Show Less
Hazet - Corporate Logo
T#:640838
Part#: 1976
In Stock at Vendor
$ 102.99

This product was last offered at the strikethrough price on
05-07-2026

$ 99.99 USD
Free Shipping on orders $49 and up
$ 99.99 USD
Free Shipping on orders $49 and up

Nostrum - Corporate Logo
T#:9609825
Part#: H703-1257
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.
Show More Show Less
OEM INA BMW Deflection Pulley -- E60/1 E65/6 E83
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:22236
Part#: 11287516847
Ships in 1-2 days
$ 41.07 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc). OEM replacement for BMW part # 11287516847

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
BMW 5 Series - 525i, 530i
BMW X Series - X3 2.5i, X3 3.0i

--.

Show More Show Less

Genuine BMW Accelerating Sensor
For vehicles with production date up to 09/2005
Genuine BMW - Corporate Logo
T#:155010
Part#: 65776951595
Ships in 4 Business Days
3% off MSRP $ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.99 USD
Free Shipping
3% off MSRP
$ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 105.99 USD
Free Shipping


Genuine BMW Accelerating Sensor -
This item fits the following BMW Chassis:
E65,E85,E90


Genuine BMW - Corporate Logo
T#:34255
Part#: 11337559797
Ships in 1-2 days
7% off MSRP $ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 58.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up


Genuine BMW Roller Drag Lever
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Show More Show Less
ECS - Corporate Logo
T#:585258
Part#: 11247628034WPCKT
Ships in 1-2 days
Sale - Save 3% $ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD
Free Shipping
Sale - Save 3%
$ 803.88

This product was last offered at the strikethrough price on
06-14-2026

$ 779.76 USD
Free Shipping

BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set

Ensure optimal engine performance with the BMW N54 N55 WPC Treated Genuine BMW Rod Bearing Set. This genuine BMW rod bearing set, treated with WPC technology, is specifically designed for BMW N54 and N55 engines, providing several benefits for engine longevity and reliability. Engineered with precision and quality in mind, it offers:

  • Enhanced durability and wear resistance for extended engine life
  • Reduced friction and heat buildup for improved engine performance
  • WPC treatment for superior lubrication and protection against metal-to-metal contact
  • Genuine BMW quality and reliability for peace of mind

Upgrade your BMW N54 or N55 engine with this high-quality rod bearing set for enhanced performance and longevity.

Show More Show Less
Genuine BMW - Corporate Logo
T#:31790
Part#: 11137545293
Ships in 4 Business Days
13% off MSRP $ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 136.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.99 USD
Free Shipping on orders $49 and up


Genuine BMW Gasket Steel
This item fits the following BMW Chassis:
E53 48IS,E53 X5,E63,E65,E70 X5 X5

Fits BMW Engines including:
N62,N62N



Genuine BMW - Corporate Logo
T#:40744
Part#: 12617607909
Ships in 1-2 days
8% off MSRP $ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD
Free Shipping
8% off MSRP
$ 298.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 273.99 USD
Free Shipping


Genuine BMW Oil Levelling Sensor -
This item fits the following BMW Chassis:
E70 X5,E71,E83 X3,F15

Fits BMW Engines including:
N51,N52,N52N,N54,N55,N57N

Show More Show Less
Genuine BMW - Corporate Logo
T#:31413
Part#: 11127553209
Ships in 1-2 days
13% off MSRP $ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD
Free Shipping
13% off MSRP
$ 233.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 202.99 USD
Free Shipping


Genuine BMW Cylinder Head Gasket Asbestos-Free - 1,16Mm
This item fits the following BMW Chassis:
E70 X5,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F10,F25 X3

Fits BMW Engines including:
N51,N51,N52,N52N

Show More Show Less