BMW Intake Parts for BMW 5 Series E60 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Vargas Black TiAL BOV Spring - BMW N54
Vargas Black TiAL BOV Spring - BMW N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51813316
Part#: VTT-TIAL-BLACK
Ships on Oct 13, 2026
New Item
$ 52.99 USD
Free Shipping
Add to Wish List
$ 52.99 USD
Free Shipping
Add to Wish List
Maintain the peak performance of your forced induction system with the VTT Black TiAL BOV Spring.
Black Walnut Shell 20/30 Blast Media
Black Walnut Shell 20/30 Blast Media
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:22690744
Part#: B1100051
Ships in 9 Business Days
Sale - Save 20% $ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 20%
$ 73.99

This product was last offered at the strikethrough price on
05-03-2026

$ 59.19 USD
Free Shipping on orders $49 and up
Add to Wish List
This blast media makes DIY carbon cleaning a breeze!
Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L
Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L ...
Precision Raceworks - Corporate Logo
T#:47679241
Part#: 201-0133
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks BMW E9x/E8x T-Map Extension Harness is an excellent way to extend the length of your existing harness for the charge pipe T-Map sensor without having to cut and splice any wires. Additionally, this harness adapts your OEM map sensor wire to a 3.5 bar map sensor connector. An absolute must for Forward Facing Manifolds and Charge Pipes from Precision Raceworks or any other company offering a pipe that relocates the map sensor, resulting in the need to extend the harness.
Show More Show Less
Forge Silicone Vacuum Hoses
Forge Silicone Vacuum Hoses
Forge - Corporate Logo
T#:558490
Part#: FORGEVAC
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
09-18-2026

Starting at $ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
09-18-2026

Starting at $ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.
3" To 2.5" Silicone Coupler 3" Length
3" To 2.5" Silicone Coupler 3" Length
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:363896
Part#: 003402ECS04A-02
Special Order: No Guaranteed ETA
Sale - Save 10% $ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 9.99

This product was last offered at the strikethrough price on
06-13-2026

$ 8.99 USD
Free Shipping on orders $49 and up
Add to Wish List

3" To 2.5" Silicone Coupler 3" Length

Enhance the performance and durability of your BMW or MINI with the 3" To 2.5" Silicone Coupler 3" Length. This silicone coupler provides a reliable connection between components, ensuring optimal airflow and reducing the risk of leaks. Engineered for durability and heat resistance, it withstands high temperatures and harsh conditions. Upgrade your BMW or MINI with this premium silicone coupler for improved performance.

  • Reliable connection for optimal airflow
  • Reduces the risk of leaks for enhanced performance
  • Engineered for durability and heat resistance
  • Fits both BMW and MINI models
Show More Show Less
ECS Tuning Charge Pipe Kit - BMW E60 N54 3.0L
ECS Tuning Charge Pipe Kit - BMW E60 N54 3.0L
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:6924269
Part#: 090753ECS09
Special Order: No Guaranteed ETA
Sale - Save 15% $ 282.99

This product was last offered at the strikethrough price on
06-14-2026

$ 240.54 USD
Free Shipping
Add to Wish List
Sale - Save 15%
$ 282.99

This product was last offered at the strikethrough price on
06-14-2026

$ 240.54 USD
Free Shipping
Add to Wish List
If you are looking to improve your intake system, a major component to consider is your charge pipe. The stock plastic BMW charge pipe is flimsy, prone to cracking, and restricts airflow at high RPMs. This results in unreliability and restricted power. ECS Tuning's new line of powder-coated Aluminum Charge Pipes are designed to replace your stock pipes, offering increased strength, reliability, and higher airflow! Using aluminum construction and black powder coating, this pipe not only looks great but is structurally stronger and won't crack after long-term exposure to heating/cooling cycles. This is perfect for anyone who is looking for more power, whether the car is stock, or highly modified. Additionally, all OE ports are retained and all clips and seals are included for installation! There's no longer a need to reuse your stock clip and o-ring. As an added bonus, a water/meth bung has been added to the design for those who are looking to get the highest levels of performance out of their BMW's engine! Features: OEM Fitment Increased diameter and airflow Increase throttle response and decreases turbo lag. Powder-coated black aluminum piping. CNC Machined Throttle Body Flange Includes one 1/8' NPT bung for meth/water injection. Includes everything necessary to upgrade from factory chargepipe. 4-Ply Reinforced Silicone Couplers 1-Year Limited Warranty against defects or workmanship
Show More Show Less
BMW N54 ECS Exact-Fit High Flow Air Filter - Dry
BMW N54 ECS Exact-Fit High Flow Air Filter - Dry
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:28637273
Part#: 012054LA41-DRY
Special Order: No Guaranteed ETA
Sale - Save 20% $ 77.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.39 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 20%
$ 77.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.39 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW N54 ECS Exact-Fit High Flow Air Filter - Dry

Enhance the performance of your BMW N54 engine with the BMW N54 ECS Exact-Fit High Flow Air Filter - Dry. This high flow air filter is designed to maximize airflow to the engine, improving horsepower and torque. Its dry filter media does not require oiling, reducing maintenance and the risk of over-oiling. Upgrade your BMW N54 with this exact-fit air filter for increased performance and engine efficiency.

  • Maximizes airflow to the engine for improved performance
  • Dry filter media eliminates the need for oiling
  • Reduces maintenance and risk of over-oiling
  • Exact-fit design ensures easy installation on BMW N54 engines
Show More Show Less
4MM Silicone Vacuum Hose - Black - 9 Feet
4MM Silicone Vacuum Hose - Black - 9 Feet
Forge - Corporate Logo
T#:370919
Part#: VC04B
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
aFe ProDry S Air Filter - E60 545i 550i, E63 E64 645ci 650i
aFe ProDry S Air Filter - E60 545i 550i, E63 E64 645ci 650i
AFE - Corporate Logo
T#:2647
Part#: 31-10145
Back Ordered
$ 97.00 USD
Free Shipping
Add to Wish List
$ 97.00 USD
Free Shipping
Add to Wish List
This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E60 5 series : 545i 550i 2004-2010

E63 6 series : 645ci 650i 2004-2010

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
Show More Show Less
3MM Silicone Vacuum Hose - Red - 9 Feet
3MM Silicone Vacuum Hose - Red - 9 Feet
Forge - Corporate Logo
T#:370915
Part#: VC03R
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

  • High-quality silicone construction for durability
  • Superior flexibility for easy installation
  • Resistant to extreme temperatures
  • Ensures reliable vacuum pressure for efficient engine operation
  • Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 

Show More Show Less
4MM Silicone Vacuum Hose - Blue - 9 Feet
4MM Silicone Vacuum Hose - Blue - 9 Feet
Forge - Corporate Logo
T#:370917
Part#: VC04
Back Ordered
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
09-18-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit
Phoenix Racing N54 Port Injection Intake Manifold With 750cc Injector...
Burger Motorsports - Corporate Logo
T#:44258354
Part#: BMW-N54PORT-750
Back Ordered
$ 988.00 USD
Add to Wish List
$ 988.00 USD
Add to Wish List

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

  • Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
  • Supports increased airflow to enhance engine power and efficiency
  • Integrated top-mount port injection bungs optimize fuel injector spray and delivery
  • Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
  • Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
  • High-quality, high-temperature o-rings provide lasting durability and reliability
  • Exclusively available through Turner Motorsport, ensuring trusted quality and service
Show More Show Less
Plazmaman N54 Intake Manifold - BMW N54 (135i, 335i, 335is, 535i, Z4)
Plazmaman N54 Intake Manifold - BMW N54 (135i, 335i, 335is, 535i, Z4)...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51531915
Part#: VTT-PLAZMAMAN-1
Back Ordered
New Item
$ 2,039.99 USD
Free Shipping
Add to Wish List
$ 2,039.99 USD
Free Shipping
Add to Wish List
The Plazmaman N54 Intake Manifold is a premium performance upgrade for the BMW N54 engine.
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 1-2 days
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings
High Flow Water-Methanol Solenoid Upgrade - Quick-Connect Fittings ...
SnowPerformance - Corporate Logo
T#:598937
Part#: SNO-40060
In Stock
$ 73.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 73.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: Robust Methanol Resistant Stainless Steel/Zinc Design High PSI Solenoid Designed to Be Used Between Pump & Injection Point Two Brackets Mounted To Solenoid For Easy Install Pigtail Harnessed Wiring Connections Easy to Read "Flow" Indication 2 Quick Connect Fittings To 1/4" High Temp Nylon Tubing Large 3/16" Orifice For Maximum Flow Through System
Show More Show Less
1 Gallon Methanol Tank - Clear/White
1 Gallon Methanol Tank - Clear/White
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
#4 Water Methanol Nozzle - 4 GPH
#4 Water Methanol Nozzle - 4 GPH
SnowPerformance - Corporate Logo
T#:13957879
Part#: SNO-N0400
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol Injection Kit - Stage 2
Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol...
SnowPerformance - Corporate Logo
T#:641833
Part#: SNO-20010
In Stock
$ 520.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 520.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Keep BMW boost temperatures in check with the Snow Performance Stage 2 Boost Cooler water methanol injection kit, suitable for all forced induction applications (Supercharged/Turbocharged). This kit enhances performance and cooling, especially beneficial for direct-injected engines, effectively removing carbon build-up on valves.

  • Suitable for all forced induction applications (Supercharged/Turbocharged)
  • Simple handheld display for easy injection point adjustment
  • VC-30 progressive controller with digital display and MAP sensor for precise injection
  • Adjustable start and full points for optimal engagement
  • Proportional injection based on boost pressure for accurate delivery
  • Improves drivability and provides cooling benefits
  • Recommended for street/strip driven gas forced induction vehicles
  • OEM approved water methanol injection pump with proprietary heat flange
  • Extreme Environment 300 PSI UHO pump for durability in elements
  • 100% methanol resistant components for longevity
  • ACU-SEAL compression fittings for leak-free operation
  • Increases induction charge density for enhanced performance
  • Made in the U.S.A. and supports 1,000+ HP
Show More Show Less
Snow Performance Water Methanol Injection Nozzle - 8GPH
Snow Performance Water Methanol Injection Nozzle - 8GPH
SnowPerformance - Corporate Logo
T#:17040324
Part#: SNO-N0800
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM V3 Universal Water/Methanol Injection Kit (30-3300)
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Add to Wish List
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Chassis
Fuel-It! CANfuel Sequential Port Fuel Injection Controller - N54 E-Ch...
Fuel-It! - Corporate Logo
T#:589404
Part#: N54-PORTINJCONMO
In Stock
$ 599.00 USD
Free Shipping
Add to Wish List
$ 599.00 USD
Free Shipping
Add to Wish List
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.
Show More Show Less
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM V3 Water/Methanol Injector Kit (Qty 2)
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
Ships in 2 Business Days
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
Add to Wish List
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
BMS DDP5800 Water/Methanol Injection Pump
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
Water/Methanol Nozzle - 6GPH
Water/Methanol Nozzle - 6GPH
SnowPerformance - Corporate Logo
T#:21374127
Part#: SNO-N0600
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
N1000 - Snow Performance Water Injection Nozzle
N1000 - Snow Performance Water Injection Nozzle
SnowPerformance - Corporate Logo
T#:2317846
Part#: SNO-N1000
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
2 Gallon Low Profile Universal Methanol Tank
2 Gallon Low Profile Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
High Flow Water Methanol Check Valve
High Flow Water Methanol Check Valve
SnowPerformance - Corporate Logo
T#:2317849
Part#: SNO-8CV-QC
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings
Water-Methanol Dual Nozzle Upgrade - Quick-Connect Fittings
SnowPerformance - Corporate Logo
T#:598936
Part#: SNO-40040
In Stock
$ 41.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 41.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Red High Temp Nylon Tubing - 20ft
Red High Temp Nylon Tubing - 20ft
SnowPerformance - Corporate Logo
T#:640586
Part#: SNO-8087
In Stock at Vendor
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow
Low Profile Water-Methanol Nozzle Holder 4AN 90* Elbow
SnowPerformance - Corporate Logo
T#:640584
Part#: SNO-809-BRD
In Stock
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 20.99 USD
Free Shipping on orders $49 and up
Add to Wish List
SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit - N20 N54 N55 N63 S55 S63
SnowPerformance Stage 2.5 Boost-Controlled Water/Meth Injection Kit -...
SnowPerformance - Corporate Logo
T#:380988
Part#: SNO210
In Stock
$ 583.99 USD
Free Shipping
Add to Wish List
$ 583.99 USD
Free Shipping
Add to Wish List
The Snow Performance Stage 2 Boost Cooler is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic Nozzles on an independent basis.
Show More Show Less
SnowPerformance Stage 3 Boost Controller - N54 N55
SnowPerformance Stage 3 Boost Controller - N54 N55
SnowPerformance - Corporate Logo
T#:380432
Part#: 60061
Ships in 3 Business Days
$ 416.99 USD
Free Shipping
Add to Wish List
$ 416.99 USD
Free Shipping
Add to Wish List

This stage 3 boost controller will easily upgrade your existing stage 2 kit to stage 3. This digital boost controller gives you the ability to easily dial in your setup - simply set your start and full points, and the software handles the rest. Two buttons allow you to make adjustments. The LCD display shows boost pressure, fuel injector duty cycle, and flow percentage. 

Features:

  • LCD Screen
  • Digital Variable mapping
  • Comprehensive Instructions
Show More Show Less
Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-Methanol Injection Kit (Stainless Steel Braided Line, 4AN Fittings)
Stage 2 Boost Cooler Forced Induction Progressive Engine Mount Water-...
SnowPerformance - Corporate Logo
T#:641841
Part#: 20010-BRD
In Stock at Vendor
$ 625.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 625.00 USD
Free Shipping on orders $49 and up
Add to Wish List

Turner Motorsport presents the Snow Performance Stage 2 Boost Cooler Water Methanol Injection Kit, ideal for all forced induction applications, including supercharged and turbocharged BMWs. With its easy-to-use handheld display screen, this kit allows precise control over injection points and can be conveniently mounted for access. The VC-30 progressive controller adjusts water/methanol injection based on boost pressure, providing accurate delivery for improved drivability and cooling benefits. This kit is recommended for street/strip driven gas forced induction vehicles seeking cooling over a wide range, especially beneficial for direct-injected engines to remove carbon buildup on valves. Key benefits include:

  • Precise injection control for improved performance
  • OEM-approved water methanol injection pump for durability
  • 100% methanol-resistant components for long-lasting use
  • Guaranteed leak-free operation with ACU-SEAL compression fittings
  • Increases induction charge density and fuel octane levels for full power
Show More Show Less
High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings
High Flow Water-Methanol Solenoid Upgrade - 4AN Fittings
SnowPerformance - Corporate Logo
T#:21308462
Part#: 40060-BRD
In Stock
$ 73.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 73.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Robust protection for your WMI installation to ensure peace of mind The new and improved Snow Performance Solenoid Upgrade offers 100% safety for all injection systems utilizing a rear mounted reservoir, injection points under vacuum, or installs where injection nozzle is lower than water-methanol reservoir. The solenoid fits in line between the pump and injection point and locks fluid in place when not in use adding safety and peace of mind to any injection system. Can also be used to control a second stage of injection with any VC-50, Stage 3, or MPG-MAX water-meth controller. Features: 100% Methanol Resistant Stainless Steel Construction Comes with (2) 1/8" NPT to 4AN Fittings & Mounting Hardware Can Be Used With All Snow Performance Water Methanol Injection Kits & Upgrades Highest Flowing Water Methanol Solenoid On The Market U.S.A Made
Show More Show Less
Boost Cooler Stage 3 DI ProLine Water Injection
Boost Cooler Stage 3 DI ProLine Water Injection
SnowPerformance - Corporate Logo
T#:21308464
Part#: SP10317PRO
In Stock at Vendor
$ 833.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 833.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Snow Performance Stage 3 Boost Cooler brings 2D mapped water-methanol injection delivery to your DI (direct fuel injected) and forced induction (turbocharged/supercharged) vehicle. The Stage 3 creates a 2Dinjection map based off boost and fuel pressure sensor input to deliver an extremely accurate amount of water-methanol when the engine needs it most. Bringing fuel pressure into the mix allows the injection curve to be extended past specific boost points for greater range/control. None invasive, the Stage3 Boost Cooler controller is designed to mount on the steering column or the dash so no additional gauge pods need to be purchased and functions as a boost gauge, water-meth controller and fuel system monitor all in one! Proven to reduce the air inlet temperature by up to 100 degrees and increase octane by 25points for maximum HP and cooling . Comes with adjustable Stage 3 water-meth controller, 4AN fittings, and stainless steel braided line to mount pump/tank in engine bay of vehicle.
Show More Show Less
4 Cylinder Direct Port Water Methanol Upgrade - Black Line
4 Cylinder Direct Port Water Methanol Upgrade - Black Line
SnowPerformance - Corporate Logo
T#:583754
Part#: SNO-94500-BLK
In Stock at Vendor
$ 208.99 USD
Free Shipping
Add to Wish List
$ 208.99 USD
Free Shipping
Add to Wish List
Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit
Snow Performance Water/Methanol (WMI) Direct Port Injection Plate Kit...
SnowPerformance - Corporate Logo
T#:21308451
Part#: 40069-2
In Stock
$ 742.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 742.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Direct port injection plate with 1.5GPH nozzles for clean WMI installs ​Snow Performance Direct Port Injection Plates are an easy, clean way to install a high performance water/methanol system. Add it to your existing system WMI system for a boost in capability and reliability, or build your system around it. Includes: Direct Port Injection Plate O-Rings for seal between Injection Plate and head. Required Hardware for Installation Instructions for fitment on N54/N55/S55 style engines. Hardlines plumbed to distribution rail 6 1.5GPH Nozzles installed in plate *Note- For safety, a solenoid must be used when injecting post throttle body to prevent vacuum siphoning
Show More Show Less
82040R - Snow Performance Tee Adapter Fitting
82040R - Snow Performance Tee Adapter Fitting
SnowPerformance - Corporate Logo
T#:2317847
Part#: SNO-82040R
In Stock at Vendor
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 23.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI)
Snow VC-50 Water Methanol Controller / Boost Gauge (1-50 PSI) ...
SnowPerformance - Corporate Logo
T#:556344
Part#: 60500
In Stock at Vendor
$ 312.99 USD
Free Shipping
Add to Wish List
$ 312.99 USD
Free Shipping
Add to Wish List
Water/Methanol Nozzle - 1.5GPH
Water/Methanol Nozzle - 1.5GPH
SnowPerformance - Corporate Logo
T#:21374121
Part#: SNO-N0150
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
14GPH Water-Methanol Nozzle
14GPH Water-Methanol Nozzle
SnowPerformance - Corporate Logo
T#:21374112
Part#: SNO-N1400
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line
Water-Methanol Dual Nozzle Upgrade Stainless Steel Braided Line ...
SnowPerformance - Corporate Logo
T#:21374131
Part#: SNO-40040-BRD
In Stock at Vendor
$ 62.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 62.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol Injection Kit W/ 2.5 Gallon Tank. (Stainless Steel Braided Line, 4AN Fittings)
Stage 2.5 Boost Cooler Forced Induction Progressive Water-Methanol In...
SnowPerformance - Corporate Logo
T#:21374123
Part#: SNO-211-BRD
In Stock at Vendor
$ 909.99 USD
Add to Wish List
$ 909.99 USD
Add to Wish List
High Flow Water-Methanol Check Valve 4AN Fittings
High Flow Water-Methanol Check Valve 4AN Fittings
SnowPerformance - Corporate Logo
T#:21374126
Part#: SNO-8CV-BRD
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N20 N54/55 S55 S63 B46/48 B58
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Oct 13, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER
GAS STAGE 3 DIRECT INJECTION WATER METHANOL CONTROLLER
SnowPerformance - Corporate Logo
T#:586250
Part#: SNO-60300
Ships in 3 Business Days
$ 416.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 416.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braided Line
Snow Performance Stage 3 Boost Cooler (EFI - Port Injection) - Braide...
SnowPerformance - Corporate Logo
T#:21374153
Part#: SNO-310-BRD
Ships in 3 Business Days
$ 833.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 833.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Snow Performance Water Methanol Injection Nozzle - 7GPH
Snow Performance Water Methanol Injection Nozzle - 7GPH
SnowPerformance - Corporate Logo
T#:17040323
Part#: SNO-N0700
In Stock at Vendor
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Constructed out of 100% methanol resistant nickel plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a removable 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today! (1/8" NPT Threads)
Show More Show Less
Water Methanol Controller (Boost) - VC-30
Water Methanol Controller (Boost) - VC-30
SnowPerformance - Corporate Logo
T#:21308475
Part#: SNO-60400
In Stock at Vendor
$ 184.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 184.99 USD
Free Shipping on orders $49 and up
Add to Wish List

Water Methanol Controller (Boost) - VC-30 is a sophisticated progressive controller that includes a digital display and boost sensor for precise water/methanol injection. Designed for BMW vehicles, this controller adjusts the injection rate based on boost pressure, ensuring optimal performance and cooling.

  • Precision Injection: The VC-30 proportionally injects water/methanol based on boost pressure, providing accurate delivery for cooling and performance improvements.
  • Adjustable Settings: Features adjustable start and full points for customizable engagement and delivery curves to meet engine requirements.
  • Enhanced Cooling: Improves drivability and cooling benefits across a wide range, making it especially beneficial for direct-injected engines.
  • Carbon Build-Up Reduction: Effectively removes 100% of carbon build-up on valves, enhancing engine longevity and performance.
  • Digital Display: Includes a user-friendly digital display for monitoring and adjusting settings.
Show More Show Less
Snow Performance Boost Cooler Stage 2 Direct Port Water/Methanol Injection Kit - N54/N55
Snow Performance Boost Cooler Stage 2 Direct Port Water/Methanol Inje...
SnowPerformance - Corporate Logo
T#:589550
Part#: SNO-2169-BRD
Ships in 3 Business Days
$ 1,503.99 USD
Add to Wish List
$ 1,503.99 USD
Add to Wish List
Direct-port injection is the optimal way to run water/methanol and this kit will provide optimal, uniform placement for all six injectors.

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping