BMW 6 Series E64 (2004-2010)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
GSP North America - Corporate Logo
T#:389675
Part#: 274210
Ships in 2 Business Days
$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E39 BMW 525i 528i 530i 

E60 BMW 525i 525xi 528i 528i xDrive 530i 530xi 535i 535xi 545i 550i 

E63 BMW 645Ci 650i

Show More Show Less

OEM Valeo Alternator - E60 M5, E63/64 M6
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:14835
Part#: 12317836592
Ships in 5 Business Days
$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping

This is a Valeo brand new 170 amp alternator. These alternators are built especially for extremes of heat, cold and high demand. Your BMW deserves nothing less than the best, which is why an OEM alternator is the best option. BMW alternators are built to last using the highest quality materials and the most technologically advanced processes. All alternator parts are 100% factory tested to assure that they meet or exceed original equipment specifications. And every alternator is fully load tested to guarantee compliance with BMW's strict performance specifications.

No core charge!

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 BMW M6

Show More Show Less

Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping
Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 6 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.

Clinched - Corporate Logo
T#:23020164
Part#: GL7
Special Order: No Guaranteed ETA
$ 260.00 USD
Free Shipping
$ 260.00 USD
Free Shipping

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

Show More Show Less
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Aug 14, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.

KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389668
Part#: 193726J
Special Order: No Guaranteed ETA
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Perfect for lowered cars that need to dial out negative camber to preserve tires. Also perfect for track cars - easily dial in toe and camber for the track for better handling. Priced per set. Fits BMW E60 E63 E65.

This item fits the following BMWs:
2004-2010  E60 BMW  525i 525xi 528i 528xi 530i 530xi 535i 535xi 545i 550i M5
2004+  E63 BMW  645ci 650i M6
2002-2008  E65 BMW  745i 745li 750i 750li 760i 760li
2000-2006  E53 BMW  X5 3.0i, X5 4.4i, X5 4.6is, X5 4.8is
Show More Show Less
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389317
Part#: 193616-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2006-2008  E85 BMW  Z4 M Roadster M Coupe
Show More Show Less


KMAC - Corporate Logo
T#:389662
Part#: 193616-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Track, Stage 3
Bearing: PTFE-lined pillow-ball, no bushing

KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
1999-2003  E39 BMW  M5
1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
2004-2010  E60 BMW  M5
2004-2011  E63 BMW  M6
Show More Show Less
OEM Valeo Starter (New)
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:380773
Part#: 12417835737
Back Ordered
$ 593.99 USD
Free Shipping
$ 593.99 USD
Free Shipping
A failed starter will leave even the best-maintained BMW stranded. Replace your failed starter motor with this brand new replacement from Valeo. Valeo is an OEM BMW supplier - save money and by quality parts by buying them in a different  box!                          
Show More Show Less
OEM Valeo Alternator - E60 E63 E65 550i 650i 750i
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:379446
Part#: 12317542935KT
Back Ordered
$ 444.99 USD
Free Shipping
$ 444.99 USD
Free Shipping

The alternator in your vehicle keeps the battery at full charge when your engine is running. Because all of your electronic systems run off of this small piece, it's important that it is operational. If your lights are dim while driving or your battery dies within minutes of starting your car, it's time for a new alternator.

This is a NEW alternator from the OEM manufacturer, Valeo. No core charge applies. Valeo is an OEM manufacturer for many BMW alternators - save money by buying the same alternator in a different box!

For vehicles with production date from 03/2005.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less
Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors

Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less
Sunex - Corporate Logo
T#:5282862
Part#: 2850
Ships on Aug 14, 2026
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models

Sunex - Corporate Logo
T#:2528142
Part#: SX113D
Ships on Aug 14, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
With great comfort and design the air ratchet wrench is the perfect tool

Sunex - Corporate Logo
T#:2750699
Part#: 9914MA
Ships on Aug 14, 2026
$ 107.39 USD
Free Shipping
$ 107.39 USD
Free Shipping
Fully polished drop forged CR-V alloy steel for maximum strength and service life
Sunex - Corporate Logo
T#:5229429
Part#: 910MTAS
Ships on Aug 14, 2026
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping
Used with a torque wrench to access obstructed fasteners
Sunex - Corporate Logo
T#:2498418
Part#: 3911D
Ships on Aug 14, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This set covers 8 different functions


OEM Valeo Clutch Kit - SMG Transmission
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:379445
Part#: 21212283089
Back Ordered
$ 1,733.99 USD
Free Shipping
$ 1,733.99 USD
Free Shipping

This clutch kit from Valeo includes a new friction disc, pressure plate, and throwout/release bearing. Valeo is an OE BMW supplier - save money and buy quality parts by buying those parts in a different box!

For vehicles with an SMG transmission.

Show More Show Less