Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance.
This is a Bosch O2 sensor - also known as a Lambda probe. Bosch is an OEM supplier to BMW.
Position: after the catalytic converter (post-cat).
This item fits the following BMWs:
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible
Tired of busting your knuckles from old hardened exhaust hangers?
This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.
Enhance your BMW's exhaust system with the all-new Magnaflow Universal Muffler, available at an exceptionally affordable price point. Say goodbye to noisy and inefficient mufflers with this high-performance solution.
The Race Series muffler is meticulously designed for uncompromising performance, delivering an aggressive racecar-inspired sound. Its genuine straight-through design ensures the utmost high RPM power, while the 2.5" or 3" perforated core effectively eliminates backpressure, optimizing exhaust flow.
This muffler stands as the ideal choice for dedicated racers, turbocharged engines, nitrous oxide fuel systems, or vehicles equipped with wild cam applications. It boasts a 2.25" inlet, a 24" overall length, and a 4" diameter round, angle-cut tip.
Kindly note that this muffler is of universal fit for rear exhaust and may necessitate welding or fabrication for installation, as it is not a direct bolt-on component for any specific vehicle.
Elevate your BMW's exhaust system with the 3.0" Stainless Steel V-band Assembly - Priced Each. This top-quality V-band assembly is tailored for BMW vehicles, offering numerous advantages for enhanced exhaust performance and durability. Crafted with precision and durability in mind, it delivers:
Upgrade your BMW's exhaust system with this stainless steel V-band assembly.
Looking for an affordable way to replace your BMW's muffler and transform its exhaust note? Your search ends here! The brand-new Magnaflow Universal Muffler is your budget-friendly solution, designed to elevate your BMW's sound and style.
Say goodbye to that noisy ride and give your BMW the sound it deserves with the Magnaflow Universal Muffler. Upgrade today!
Vibrant Performance introduces their Bottle-Style resonators engineered with an authentic straight-through perforated core enveloped in premium multi-layer sound suppression materials. These resonators adeptly mitigate exhaust noise while maintaining unrestricted exhaust flow. Crafted from high-quality T304 stainless steel, Vibrant Performance offers a range of applications, ensuring a perfect fit for various vehicle models.
Special pricing! Free ground shipping! The factory header system on the M5/M6 V10 is nicely designed - except where the primary tubes join together. Here the factory tubes are crushed in size and joined in narrow housing ahead of the catalytic converters. Supersprint has designed a fully tubular header and collector system that is fully mandrel bent and makes no compromises. They even patented the design. With a complete exhaust system, we recorded gains of over 60hp! These headers can be connected to either a factory secondary cat or a Supersprint high-flow metallic cat.
What sets these headers apart from others is the expertise and craftsmanship from Supersprint in Italy. These are 100% stainless steel headers with true mandrel bends. It's a carefully engineered header and merge collector design with superior craftsmanship to other systems (sometimes knockoffs to the original Supersprint). Supersprint spends considerable time in R&D, experimenting with piping sizes and layouts to get the most horsepower gain (confirmed with their in-house dyno). Fitment is also a key consideration and this is where Supersprint's commitment to quality fabrication and construction set them apart from cheaper systems.
Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
Dynos:
Stock vs. Stroker/Supersprint:
5.7L engine, headers, sport cats,
X-pipe, mufflers
Stock vs. Supersprint:
headers, stock cats,
X-pipe, mufflers
Stock vs. Supersprint:
headers, sport cats,
X-pipe, mufflers
Videos:
Dinan 5.7L stroker engine
Supersprint headers
Supersprint sport cats
Supersprint x-pipe
Supersprint Race mufflers
Supersprint headers
Supersprint x-pipe
Supersprint Race mufflers
Full Supersprint exhaust
Supersprint headers
Supersprint sport cats
Supersprint resonator
Supersprint Performance mufflers
section:headers (cat-delete)
connects to:stock section 1 or Supersprint section 1
tip style:80mm quad round
material:T304 stainless steel
This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to Turner Motorsport. You can download the waiver here.
This item fits the following BMWs:
2006-2010 E60 BMW M5
2005-2011 E63 BMW M6
Genuine BMW rubber exhaust hanger.
This item fits the following BMW Chassis:
E63,E65,E82,E89 Z4,F25 X3,I01 i3 -- see fitment details below.
Revamp your BMW's exhaust system with the 2.5" OD Stainless Steel "U-J Bend". This high-quality "U-J Bend" is specifically designed for BMW vehicles, offering several advantages for improved exhaust performance and durability. Engineered with precision and quality in mind, it provides:
Upgrade your BMW's exhaust system with this stainless steel "U-J Bend".
Upgrade your exhaust system with the 2.5" Stainless Steel 3-Bolt Flange - Priced Each. This high-quality flange is designed to provide a durable and reliable connection for your exhaust components. Made from stainless steel, it offers corrosion resistance and longevity, ensuring a lasting performance. Whether you're repairing or customizing your exhaust system, this flange is an essential component for a secure fit.
Maximize the potential of your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system. Engineered with precision and crafted from top-notch materials, this exhaust system guarantees unmatched performance and an unforgettable auditory experience.
Upgrade your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system today and unlock enhanced performance, aggressive styling, and an exhilarating driving experience.
BMW enthusiasts looking to fabricate a custom exhaust project will find quality and price-friendly options in the ECS Tuning Universal Exhaust catalog. These select items feature the same premium benefits as our In-House Engineered Exhaust Systems, ensuring confidence in their quality and longevity.
Elevate your BMW with ECS Tuning Universal Exhaust components, designed for quality and durability in custom exhaust projects.
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance.
This is a Bosch O2 sensor - also known as a Lambda probe. Bosch is an OEM supplier to BMW.
Position: bank 1, before the catalytic converter (pre-cat).
This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6
Maximize the potential of your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system. Engineered with precision and crafted from top-notch materials, this exhaust system guarantees unmatched performance and an unforgettable auditory experience.
Upgrade your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system today and unlock enhanced performance, aggressive styling, and an exhilarating driving experience.
Free ground shipping!
Supersprint sport cats for the M5/M6 are designed to work with their performance headers and replace the stock secondary cats. The Supersprint sport cats are much freer-flowing than a factory-style cat. With less restriction, less effort is required to move the exhaust gasses which will free up horsepower and torque. This cat section will mount to the Supersprint merge collectors and then to a Supersprint or stock section 2. These are built with O2 sensor bungs pre-installed after the cat if you wanted to extend your stock post-cat O2 sensors (however, special software may still be needed).
Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
Supersprint metallic sport catalytic converters are sourced from HJS of Germany. For 30 years HJS has been supplying motorsports teams with sport cats when rules required them. HJS is now a worldwide leader in sport cat technology and performance. Rally cars, German DTM, and Formula 3 all rely on HJS for clean, reliable horsepower. Supersprint works closely with HJS to spec a catalytic converter that is correct for the vehicle and engine package. This allows for a substantial increase in flow but which, at the same time, keeps the environmental specs within European limits. With any high-flow catalytic converter, special software or other work may be required to keep emissions fault codes and check engine lights from displaying. Supersprint catalytic converters are sold for track and other off-road uses only.
section:section 1 with metallic sport cats
connects to:Supersprint headers; Supersprint or stock section 2
material:T304 stainless steel
This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.
This item fits the following BMWs:
2006-2010 E60 BMW M5
2005-2011 E63 BMW M6
Upgrade your vehicle's muffler affordably with the Magnaflow Universal Muffler, providing a solution to loud exhausts without breaking the bank. Crafted from 100% stainless steel, these mufflers are built to endure extreme conditions, ensuring durability and reliability.
Maximize the potential of your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system. Engineered with precision and crafted from top-notch materials, this exhaust system guarantees unmatched performance and an unforgettable auditory experience.
Upgrade your BMW E63/E64 M6 with the Eisenmann Performance Exhaust system today and unlock enhanced performance, aggressive styling, and an exhilarating driving experience.
Free ground shipping!
The Supersprint 'Race' rear muffler system is one step beyond the standard Sport mufflers. Don't be fooled by the name - the 'Race' mufflers are designed for street use and the name only distinguishes it from the standard Sport system. With the stock system the sound is very subdued. With the 'Race' mufflers the sound is much more noticeable and more aggressive - a perfect sound to compliment the assertive nature of an M6. You will hear this exhaust but it will not be intrusive or sound out of place on a civilized sports/GT car like the M6. The Supersprint center pipes to delete the rear resonators are a welcome addition.
Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
section:rear mufflers
connects to:stock section 2 or Supersprint section 2
tip style:80mm quad round
material:T304 stainless steel
Video:
Supersprint x-pipe
Supersprint F1 Race mufflers
This item fits the following BMWs:
2006-2011 E63 BMW M6
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Key Features:
Free ground shipping!
These Supersprint performance mufflers enhance the athletic side of the M6's personality. With a freer-flowing design there is more of that exhaust pop and rumble coming to the cabin, reminding you that this is a BMW Motorsport vehicle and not a luxury cruiser. The sport mufflers are more subdued than the race version with a great sound and no dramatic side effects. You hear the exhaust when you want to but it's composed and smooth when you don't want to advertise. A moderate increase in torque and horsepower from less restriction is a nice bonus. These mufflers are clamped in place of the stock mufflers, making for a straight forward and simple install. If you desire later on to hear more of the exhaust, an x-pipe can also be installed to eliminate the rear resonator.
Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!
section:rear mufflers
connects to:stock center section or Supersprint x-pipe
tip style:90mm quad round
material:T304 stainless steel
This item fits the following BMWs:
2006-2011 E63 BMW M6
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance.
This is a Bosch O2 sensor - also known as a Lambda probe. Bosch is an OEM supplier to BMW.
Position: post-cat, after the catalytic converter (pre-cat). Bank 1 and Bank 2 use the same sensor (2 required per vehicle).
This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6