BMW 7 Series E65 (2002-2008)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

MOMO - Corporate Logo
T#:301059
Part#: TMS301059
In Stock at Vendor
$ 279.00 USD
Free Shipping
$ 279.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.
Show More Show Less
HJS - Corporate Logo
T#:2423575
Part#: 1K0253141N
In Stock
18% off MSRP $ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up
18% off MSRP
$ 34.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 27.99 USD
Free Shipping on orders $49 and up
Commonly found between mid-pipe and front muffler. 60x95mm
OEM INA Deflection Pulley -- N62 E60/1 E63/4 E65/6/7 E53
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:362736
Part#: 11287549557
Ships in 6 Business Days
$ 30.99 USD
Free Shipping on orders $49 and up

This is an OEM INA Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulley is known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

MOMO - Corporate Logo
T#:388419
Part#: RACAIR
In Stock
$ 95.00 USD
Free Shipping
$ 95.00 USD
Free Shipping
Momo Race Airleather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black perforated Endurance leather, and a silver anodized aluminum base. The Race knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.
Show More Show Less

HJS - Corporate Logo
T#:1195885
Part#: 18307560780
Ships in 4 Business Days
$ 57.99 USD
Free Shipping on orders $49 and up
Used to connect two pieces of exhaust tubing
ATE - Corporate Logo
T#:377586
Part#: 34111163647
Ships in 1 Business Day
$ 23.51 USD
Free Shipping on orders $49 and up
A kit to rebuild one front caliper includes caliper piston seals. Price is per caliper.

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
1997-2003 E39 BMW 525i 528i
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 528i xDrive 535i 535i xDrive 535d 535d xDrive 550i 550i xDrive
2004-2010 E63 BMW 645ci 650i
2012+ F12 BMW 640i 640i xDrive 650i 650i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe 650i Gran Coupe 650i xDrive Gran Coupe
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 740li xDrive 750i 750li 750i xDrive 750li xDrive 760li
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i
2008-2014 E71 BMW X6 xDrive35i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i
Show More Show Less

MOMO - Corporate Logo
T#:1787
Part#: SUBKCA
Ships on Sep 4, 2026
$ 105.00 USD
Free Shipping
$ 105.00 USD
Free Shipping
Momo Shadow Carbonlook/Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. This knob features a carbon fiber style top and high quality black airleather with black anodized base. The Shadow knob favors over-palm shifting (the palm over the top of the knob). This knob is 4.5oz, slight heavier than stock. Comes with installation kit, ready to install.
Show More Show Less
Autosol - Corporate Logo
T#:580275
Part#: AS7800
Back Ordered
$ 25.99 USD
Free Shipping on orders $49 and up
The proper protection for your convertible top.

ATE - Corporate Logo
T#:594540
Part#: 34116757036
In Stock
$ 31.79

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 31.79

This product was last offered at the strikethrough price on
05-03-2026

$ 23.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

18x9.5" ET35 Satin Black APEX VS-5RS Forged BMW Wheel
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:4607225
Part#: VS5RS1895ET35SMB
Ships in 5 Business Days
$ 739.00 USD
Free Shipping
$ 739.00 USD
Free Shipping
18x9" ET30 Anthracite APEX EC-7RS Forged Wheel
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:11170593
Part#: EC7RS189ET30AN
Ships in 5 Business Days
$ 709.00 USD
Free Shipping
$ 709.00 USD
Free Shipping
Black Forest Industries - Corporate Logo
T#:31158762
Part#: WBFI77-E88-501
Ships in 2 Business Days
$ 229.99 USD
Free Shipping on orders $49 and up

BFI Center Cap Adapters For BBS E88 Wheels - Brushed - Set of Four are designed to enhance the appearance of BMW's BBS E88 wheels by covering the open center hole with a sleek, brushed finish. These adapters:

  • Provide a polished, high-quality look by covering the open center hole
  • Are machined from 6061-T5611 aluminum for superior strength and durability
  • Feature a hand-brushed finish for a seamless OEM appearance
  • Allow the use of 3-prong 70.6mm BBS center caps to add a touch of class
  • Are sold in sets of four, with center caps not included
Show More Show Less


ATE - Corporate Logo
T#:594621
Part#: 34321159890
Ships in 1-2 days
$ 22.16 USD
Free Shipping on orders $49 and up
ATE - Corporate Logo
T#:586739
Part#: 34116759165
Ships in 4 Business Days
$ 21.00

This product was last offered at the strikethrough price on
05-07-2026

$ 20.99 USD
Free Shipping on orders $49 and up
$ 20.99 USD
Free Shipping on orders $49 and up
Rubber sleeves & caps to service one caliper
MOMO - Corporate Logo
T#:583211
Part#: 1070BLK
Ships on Aug 13, 2026
$ 485.00 USD
$ 485.00 USD
MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport. The Start seat has a classic shape with aggressive side bolstering and a more upright seating position than the Super Cup.
Show More Show Less

MOMO - Corporate Logo
T#:343229
Part#: R1908/35S
Ships on Aug 14, 2026
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable suede covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.
Show More Show Less

Ina - Corporate Logo
T#:42301989
Part#: ZC00471K
Ships in 8 Business Days
$ 51.99 USD
Free Shipping on orders $49 and up
The right choice for any BMW owner looking to ensure engine longevity and reliable oil system performance with the highest quality OEM components.
APEX EC-7 19x8.5" ET35 Satin Black Wheel 21.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201365
Part#: EC71985ET35SMBK
Ships in 5 Business Days
$ 439.00 USD
$ 439.00 USD
19x8.5" ET35 APEX EC-7 Wheel 21.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x8.5"
Offset (mm):35
Weight (lbs):21.9
Profile:1, minimal dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x8.5" ET35 Anthracite Wheel 21.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201367
Part#: EC71985ET35AN
Ships in 5 Business Days
$ 439.00 USD
Free Shipping
$ 439.00 USD
Free Shipping
19x8.5" ET35 APEX EC-7 Wheel 21.9lbs.
Wheel Specs
Fitment:Front or Rear
Size:19x8.5"
Offset (mm):35
Weight (lbs):21.9
Profile:1, minimal dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

APEX EC-7 19x10" ET25 Anthracite Wheel 23.5lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201373
Part#: EC71910ET25AN
Ships in 5 Business Days
$ 469.00 USD
Free Shipping
$ 469.00 USD
Free Shipping
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x10"
Offset (mm):25
Weight (lbs):23.5
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

17" APEX ARC-8 Square Wheel Set
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:19395591
Part#: ARC817942SQ
Ships in 9 Business Days
Starting at $ 1,356.00 USD
Free Shipping
Starting at $ 1,356.00 USD
Free Shipping
Apex ARC8 17x9" ET42 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
APEX ARC-8 17x9" ET30 Matte Bronze Wheel 16.55lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:637215
Part#: ARC8179ET30MBZ
Special Order: No Guaranteed ETA
$ 339.00 USD
$ 339.00 USD
APEX EC-7 19x9.5" ET22 Satin Black Wheel 22.9lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:201362
Part#: EC71995ET22SMBK
Ships in 5 Business Days
$ 459.00 USD
$ 459.00 USD
19x10" ET25 APEX EC-7 Wheel 23.5lbs.
Wheel Specs
Fitment:Mostly Rear
Size:19x9.5"
Offset (mm):22
Weight (lbs):22.9
Profile:3, deep dish

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less


Ina - Corporate Logo
T#:42302003
Part#: ZC-76349S
Ships in 8 Business Days
$ 474.99 USD
Free Shipping on orders $49 and up
For BMW owners seeking dependable timing performance and factory-level precision, the OEM INA Engine Timing Set from Turner Motorsport delivers unmatched reliability and peace of mind.
18" VS5RS APEX Square Wheel Set
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:19428670
Part#: VS5RS181025SQ
Ships in 5 Business Days
Starting at $ 2,824.00 USD
Free Shipping
Starting at $ 2,824.00 USD
Free Shipping
Apex VS5RS 18x10" ET25 Wheel Set Apex 10" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
18" APEX EC-7 Square Wheel Set
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:19395578
Part#: EC718931SQ
Ships in 5 Business Days
Starting at $ 1,596.00 USD
Free Shipping
Starting at $ 1,596.00 USD
Free Shipping
Apex ARC8 18x9" ET31 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less

APEX ARC-8 18x10" ET25 Anthracite Concave Wheel 19.95lbs
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:180706
Part#: ARC81810ET25AN
Ships in 5 Business Days
$ 409.00 USD
Free Shipping
$ 409.00 USD
Free Shipping
18x10" ET25 Anthracite Concave APEX ARC-8 Wheel 19.95lbs
Wheel Specs
Fitment:Rear
Size:18x10.0"
Offset (mm):25
Weight (lbs):19.95
Profile:Concave

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

All APEX wheels are the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 1-series (E82), 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For more information on APEX BMW wheels and BMW wheel fitments in general, check out our APEX Wheels page!

Price is per wheel.

Show More Show Less

18" APEX SM-10 Square Wheel Set
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:19395583
Part#: SM1018930SQ
Ships in 5 Business Days
Starting at $ 1,736.00 USD
Free Shipping
Starting at $ 1,736.00 USD
Free Shipping
Apex SM-10 18x9" ET30 Wheel Set Apex 9" wheel set for the front and rear of your BMW. These are a bit wider than stock to put more rubber to the road. This helps to reduce understeer on cars with staggered wheel sets and gives you the option to rotate tires. If you're tracking your BMW you should absolutely have a square wheel set (the same size front and rear). Adding a wider wheel will get you more rubber where it counts - reducing understeer and improving initial turn-in. APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand. Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
Show More Show Less
Apex EC-7 19" Staggered Wheel Set - Race Silver
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:599071
Part#: EC71995ET28RSKT
Ships in 5 Business Days
$ 1,876.00 USD
$ 1,876.00 USD
Specifications: Color - Race Silver Size Front - 19x9.5" ET28 ​Size Rear - 19x10.5" ET45

APEX ARC-8 19" Staggered Wheel Set - Satin Black
2X Entries For Our G87 M2 Sweepstakes!
APEX Wheels - Corporate Logo
T#:599190
Part#: ARC819105ET22KT2
Ships on Oct 22, 2026
$ 1,814.00 USD
Free Shipping
$ 1,814.00 USD
Free Shipping
Specifications: Color - Satin Black Size Front - 19x9.5" ET22 Size Rear - 19x10.5" ET22
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 3 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

MOMO - Corporate Logo
T#:338958
Part#: TMS1350
In Stock at Vendor
Starting at $ 279.00 USD
Free Shipping
Starting at $ 279.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable and slip resistant black suede covering, and thumb recesses for comfort and control.
Show More Show Less

OEM INA Belt Tensioner -- E60/1 E63/4 E65/6
Up to 8/31/2003 build date
We Price Match - Give Us A Call or Chat!
Ina - Corporate Logo
T#:19309
Part#: 11287549589
Ships in 1-2 days
$ 66.14 USD
Free Shipping
$ 66.14 USD
Free Shipping

This is an OEM INA mechanical tensioner for the serpentine belt. This tensioner keeps the belt for the  Air Conditioning taught to provide maximum performance of each system.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Ina - Corporate Logo
T#:361801
Part#: 11287549588
Ships in 1-2 days
$ 69.68 USD
Free Shipping on orders $49 and up

This is an OEM INA Water Pump Belt Tensioner. It provides pressure to the Water Pump/Alternator Belt to assure maximum performance out of the water pump and alternator and prevent the belt from slipping causing reduced cooling and lower charge output from the alternator.

OEM Schaeffler (INA, LuK, & FAG) is an engineering company that focuses on high-performance, precision manufacturing. With their individual brands INA, Luk, and FAG providing exceptionally high quality parts directly to BMW, as well as countless other automotive companies, their history of reliability and variety of offered parts makes Schaeffler a go-to replacement parts provider for all of us here at Turner Motorsport.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

Show More Show Less
Autosol - Corporate Logo
T#:16450
Part#: 7950
Ships in 9 Business Days
$ 60.99 USD
Free Shipping on orders $49 and up
Autosol's Convertible Top Cleaning Kit is a complete restoration kit for your canvas convertible top and plastic rear window. This package is an all-in-one solution for cleaning and protecting the fabric convertible top. Package includes Convertible Top Cleaner, Convertible Top Impregnating Agent (sealant and protectant), and Plastic Scratch Remover. First use the cleaner to remove dirt and stains. Then follow-up with the fabric treatment to preserve the color and protect against UV damage. Remove scratches, clean, and polish the plastic window back to its original clarity. Autosol is Made in Germany, and an OEM supplier to BMW for many of their Genuine BMW car care products.
Show More Show Less


MOMO - Corporate Logo
T#:598528
Part#: MOM-NERBK1-R
Special Order: No Guaranteed ETA
$ 105.00 USD
Free Shipping
$ 105.00 USD
Free Shipping
MOMO - Corporate Logo
T#:388399
Part#: AUTOBK1
Special Order: No Guaranteed ETA
$ 105.00 USD
Free Shipping
$ 105.00 USD
Free Shipping
MOMO Automatico leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather with bright chrome base. The Automatico knob favors over-palm shifting (the palm over the top of the knob) or pistol grip shifting. This knob is 9.8oz, heavier than most MOMO or factory BMW knobs. Comes with installation kit, ready to install.
Show More Show Less
MOMO - Corporate Logo
T#:388372
Part#: PRO35BK0S
Special Order: No Guaranteed ETA
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.
Show More Show Less

MOMO - Corporate Logo
T#:390888
Part#: TEA-MOMO
Ships on Aug 24, 2026
Starting at $ 249.00 USD
Free Shipping
Starting at $ 249.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.
Show More Show Less

MOMO - Corporate Logo
T#:388375
Part#: TUN32BK0B
Special Order: No Guaranteed ETA
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control. An ideal size for most cars and drivers, and made by renowned MOMO Italy. This is a most attractive and low cost solution. Hub adapter required.
Show More Show Less
MOMO - Corporate Logo
T#:339964
Part#: TMS21537
Ships on Aug 24, 2026
Starting at $ 249.00 USD
Free Shipping
Starting at $ 249.00 USD
Free Shipping
MOMO Mod 07 steering wheel is inspired by classic rally cars. Featuring a deep 70mm dish layout to put the wheel rim closer to the driver. Having the wheel closer to the driver means better leverage for quick steering corrections The Mod 07 has a standard 30mm round rim in either leather or suede.
Show More Show Less

MOMO - Corporate Logo
T#:388410
Part#: CTERED
Special Order: No Guaranteed ETA
$ 105.00 USD
Free Shipping
$ 105.00 USD
Free Shipping
Momo Combat Anatomic Leather shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Endurance leather, red stitching, red insert, with black anodized base. The Combat knob favors two-finger or pistol grip shifting. The shape allows two or more fingers to rest under the head of the knob - a more ergonomic shape than the factory shift knobs. This knob is 6.2oz, slightly heavier than the ZHP knob. Comes with installation kit, ready to install.
Show More Show Less
MOMO - Corporate Logo
T#:388364
Part#: MCL35BK3B
Special Order: No Guaranteed ETA
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
This steering wheel combines the best of all worlds for both track/street use and racing requirements. It has an anticorodal aluminum core, durable leather covering, and an ergonomic feel for comfort and control.
Show More Show Less

MOMO - Corporate Logo
T#:14122757
Part#: PRO35BK1C
Special Order: No Guaranteed ETA
$ 569.00 USD
Free Shipping on orders $49 and up
MOMO Racing Prototipo 6C carbon fiber steering wheel feature spokes wrapped in genuine carbon fiber with smooth premium quality leather for the grip. MOMO individually selects hides from only the best suppliers to ensure they meet their high standards.
Show More Show Less

MOMO - Corporate Logo
T#:388415
Part#: NERBK1
Special Order: No Guaranteed ETA
$ 105.00 USD
Free Shipping
$ 105.00 USD
Free Shipping
Momo Nero shift knob for nearly all BMWs. Installs in minutes for a unique touch to your interior. High quality black Top Grain leather on the lower half, black enamel insert, and a rubberized top piece with the MOMO logo. The Nero knob favors over-hand or palm shifting as opposed to a two-finger grip. The shape rests comfortably in your palm and the soft leather is a pleasant touch. This knob is 7.3oz, heavier than most factory BMW or MOMO knobs. Comes with installation kit, ready to install.
Show More Show Less
MOMO - Corporate Logo
T#:1863
Part#: TMS1863
Special Order: No Guaranteed ETA
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
MOMO Mod.88 Steering Wheel for track/competition use. An evolution to the hugely popular Mod 78 wheel. This wheel features a flat bottom for more leg clearance and better grip. It has a slightly oblong 350mm diameter rim with black suede covering.
Show More Show Less
MOMO - Corporate Logo
T#:340479
Part#: TUN35BK0B
Ships on Aug 24, 2026
Starting at $ 239.00 USD
Free Shipping
Starting at $ 239.00 USD
Free Shipping
The MOMO Tuner steering wheels combine the best features of all of the MOMO wheels. Stylish and functional, they give an immediate upgrade in steering feel and response while upgrading the aesthetics of your interior at the same time.
Show More Show Less


MOMO - Corporate Logo
T#:585740
Part#: 1073KIT
Ships on Aug 24, 2026
Starting at $ 775.00 USD
Starting at $ 775.00 USD
MOMO Racing seats have bee proven to not only keep you in place, but also keep you alive. FIA 8855-1999 certification, Adjustable padding configuration, and 5 belt openings mean this seat can accommodate a wide range of Motorsport.
Show More Show Less
MOMO - Corporate Logo
T#:1040
Part#: PRO35BK2BLACK
Special Order: No Guaranteed ETA
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
MOMO Prototipo Black steering wheel. 350mm diameter (13.8 inches). Soft black leather rim with black anodized aluminum spokes. A beautiful addition to any interior. Perfect for vintage BMWs and Porsches because of its period-correct look.

Wheel hub adapter required.
Show More Show Less