The water pumps BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Facet thermostat
• Graf water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs: 
2009+ E90 BMW 335d 
2009+ E70 BMW X5 xDrive35d

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

• Wahler Thermostat
• 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

The water pumps in BMW's should be serviced near 80,000 miles and may become an issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• Mahle-Behr thermostat
• Geba water pump
• Vaico coolant
• Mounting hardware required for the water pump

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

• OEM Wahler Thermostat
• OEM VDO Electric Water Pump
• Genuine BMW Antifreeze/Coolant
• OEM VDO Mounting hardware required for both the thermostat and water pump

Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

This water pump fits the following BMWs:
2008-20xx E82 128i
2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
2007-2012 E93 328i Convertible
2006-2006 E60 525i, 525xi, 530i, 530xi
2007-2010 E60 528i, 528xi, 528i xDrive
2007-2010 E83 X3 3.0i X3 3.0si
2007-20xx E70 X5 3.0si X5 xDrive30i 
2006-2008 E85 Z4 3.0si
2009-20xx E89 Z4 sDrive30i

Ensure your BMW's optimal performance by replacing a failing water pump with this high-quality replacement. Detectable by symptoms like coolant leaks or whining noises from under the hood, a failing water pump can lead to overheating issues. Don't risk engine damage; keep an eye out for warning signs and promptly replace the water pump. This replacement kit includes one-time-use aluminum mounting bolts for a secure installation.

Product Benefits:

• Prevents coolant leaks
• Eliminates whining noises from the engine
• Avoids overheating issues
• Includes one-time-use aluminum mounting bolts for secure installation

Ensure your BMW's engine performs at its peak with the installation of this highly efficient oil cooler from Mishimoto. Even in ideal driving conditions, elevated oil temperatures can lead to decreased pressure and compromised engine lubrication. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, all meticulously designed to reduce oil temperatures and uphold optimal driving circumstances.

• Rows: 19
• Overall Dimensions: 13" x 5.5" x 2"
• Core Dimensions: 11.25" x 5.5" x 2"
• Braided Hoses: 4ft .75 inch & 4ft 9 inch
• Braided Hose Fittings: -10AN
• Sandwich Plate Fittings: -10AN

Please take into consideration that this product may be subject to Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968). Proposition 65 is a California law that applies to companies selling products in California and necessitates the disclosure of chemicals known to cause cancer, birth defects, or other reproductive harm when present at levels exceeding specified thresholds. For further information regarding California Prop 65 warnings, visit www.P65Warnings.ca.gov.

The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.  

For vehicles with plastic thermostat housing 

Introducing Mishimoto's Universal Oil Cooler (19 row with Thermostat)

In pursuit of optimal engine lubrication, even under ideal driving conditions, is paramount for BMW owners. Elevated oil temperatures can compromise oil pressure and hinder efficient lubrication. Turner Motorsport's new oil cooler offers a solution to maintain cool oil temperatures, ensuring your engine functions at its best. This comprehensive kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter.

Key Features:

• Effective Heat Dissipation: The oil cooler efficiently dissipates heat, keeping oil temperatures within the optimal range for peak engine performance.
• Comprehensive Kit: This kit includes four feet of stainless braided line, adapter fittings, and an oil filter sandwich adapter, providing everything you need for a seamless installation.
• Precise Temperature Control: Equipped with a thermostat for fine temperature and flow control, ensuring the ideal oil temperature is maintained.
• Proposition 65 Compliant: This product complies with Proposition 65, a California law that ensures product safety.

Elevate your BMW's engine performance and protect it from the effects of elevated oil temperatures. Turner Motorsport has the solution you need.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, see: www.P65Warnings.ca.gov.