BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

T#:567568

Part#: S54VAN

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Now that BMWs popular S54 engine (found in the 2001-06 BMW M3, 2001-02 MZ3 and 2007-08 MZ4) are getting older, it's important to keep an eye on particular items. One such point is the S54 Vanos oil line. Normally thought of as a worry-free item, it has proven to put the damper on many track days. Rogue's stainless steel braided VANOS line replaces the factory BMW part number 11367837614 (current MSRP from BMW is $128.08!) The high pressure (1200psi) control system of the S54 vanos system is used to ensure responsive and accurate camshaft adjustments. The added complexity of the high oil pressure used on the S54 vanos means more opportunities for failures. Some customers have encountered the high pressure hardline fail at the track, spraying oil all over their engine compartment, ending their day. Rogue Engineering's S54 Vanos Oil Line is built in their Upper Saddle River, NJ facility, and tested to over 3000psi. Using their stainless steel braided hose with the proper banjo fittings, this a direct replacement for the factory line. Like the factory line, the lower portion of the line uses a heat sleeve from additional heat from the VANOS pump itself. Fits the following BMWs: 2001-06 BMW E46 M3 2001-02 BMW MZ3, including coupe and convertible 2007-08 BMW MZ4, including coupe and convertible

Show More Show Less

Mishimoto Oil Line Fitting Adapter Kit - E46 Z4 E9X

T#:380389

Part#: MMOCF-BMW

In Stock

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

Install a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Features: Allows for use of -10AN fittings for custom oil cooler setup 100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate Includes durable stock BMW O-rings for leak-free installation Provides additional engine bay space for applications with an oil accumulator or supercharger setup Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit Mishimoto Lifetime Warranty Included: (1) Stainless Steel Fitting Clamp (2) -10AN Fittings (2) BMW Oil O-rings (1) M8 x 1.25 x 25mm Button-Head Bolt Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Large Aluminum Oil Catch Can

T#:597051

Part#: MMOCCLA

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Universal Catch Can Kit - Carbon Fiber

T#:372557

Part#: MMOCCCF

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

T#:553971

Part#: PP.S54

In Stock

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Rogue Engineering Power Pullies are CNC machined from 6061-T6, heat treated aluminum and specially coated with a MIL-A-8625 Type III hard coat anodize finish. This kind of anodizing is not to be confused with a Type II cosmetic anodize finish (typical colors such as red, blue, silver, green, etc.). The hard coat anodize finish actually builds a small surface layer on top of the aluminum, preventing wear.

This part fits the following BMW engines:
S54

This part fits the following chassis:
E46, Z3, Z4

Show More Show Less

Mishimoto Universal 10 Row Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378421

Part#: MMOCU

In Stock

$ 410.99 USD

Add to Wish List

Qty

$ 410.99 USD

Add to Wish List

This universal oil cooler from Mishimoto is far superior to the factory unit with its 11" x 2.76" x 1.97" core. Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes 4 feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Mishimoto Automotive is a leading manufacturer of aftermarket performance cooling products. The company was established back in 2003 with one goal. That goal was to provide customers with quality cooling system upgrades that work on the track and on the road. At Mishimoto, you never have to worry about the quality of the product you are installing. This kit is universal and is not a direct bolt on. *For custom applications only. Not a direct bolt on. WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW Z Series E85/6 (2003-2008)

Sub-Categories

Rogue Engineering Stainless Steel S54 Vanos Line - E46 M3, Z3 M, Z4 M...

Mishimoto Oil Line Fitting Adapter Kit - E46 Z4 E9X

Large Aluminum Oil Catch Can

Mishimoto Universal Catch Can Kit - Carbon Fiber

Rogue Engineering Power Pulley Set - S54 - E46 M3, Z3/Z4 M

Mishimoto Universal 10 Row Oil Cooler

Mishimoto 19 Row Universal Oil Cooler

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results