Packaged by Turner for BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Automatic Transmission Service Kit - Level 2 - BMW GA6HP19Z Transmiss...
For vehicles equipped with automatic transmission GA6HP19Z *** Check Transmission Type Prior To Orde
Packaged by Turner - Corporate Logo
T#:5376301
Part#: 24117571217TMSKT
In Stock
Sale - Save 15% $ 163.99
$ 138.96 USD
Free Shipping
Sale - Save 15% $ 163.99
$ 138.96 USD
Free Shipping
Includes all the necessary components for a complete transmission service with Liqui Moly fluid Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission oil pan with integrated filter Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 quarts Liqui Moly automatic transmission fluid
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555428
Part#: LMOCK3KT
In Stock
$ 87.99 USD
Free Shipping
$ 87.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 6 Liters of Synthoil Race Tech GT1 10w-60
  • Mann Oil Filter
  • Oil Drain Plug & Washer

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport recommends Synthoil Race Tech GT1 10w-60 for your S54 engine. Race Tech is a modern high performance engine oil formulated for engines that experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exceptional lubrication and engine wear protection. This oil provides immediate lubrication upon cold start, offering significantly improved protection compared to other oils. Liqui Moly Race Tech GT1 10w-60 will keep your S54 pulling hard and running smooth on your commute home from work, your touge run through the valley, and while you are trying to get your best times on the track.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555432
Part#: LMOCK5KT
In Stock
Sale - Save 4% $ 84.99
$ 81.99 USD
Free Shipping
Sale - Save 4% $ 84.99
$ 81.99 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:5376276
Part#: 11427953129TKT
In Stock
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping
This new generation oil is made with a quality synthetic base and includes a molecular friction modifier for reduced friction and wear. It also glows under UV light so leaks can be easily traced! This unique oil contains a fluorescent green chemical friction modifier to smooth out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown a reduction in friction coefficient of as much as 15%! MolyGen oil is also a great choice for modern turbocharged engines which produce much more heat. This kit from Turner Motorsport contains all that you will need to do your regular service on your vehicle. The kit contains: Seven Quarts of Liqui Moly MolyGen Engine Oil Oil Filter Kit New Drain Plug with Crush Washer Make your next service a quality one with this new kit from Turner Motorsport
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555453
Part#: LMOCK28KT
In Stock
Sale - Save 3% $ 94.99
$ 92.06 USD
Free Shipping
Sale - Save 3% $ 94.99
$ 92.06 USD
Free Shipping
Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. Includes: 7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil Liqui Moly UV Flashlight Hengst Oil Filter Kit Febi Oil Drain Plug & Washer Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks! The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%! MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!) Smooth engine running characteristics Long engine service life due to exceptional protection against wear Rapid oil delivery at low temperatures Optimum oil pressure at all engine speeds Premium lubrication reliability at high and low temperatures High shear and ageing stability Reduces fuel consumption and pollutant emissions Outstanding engine cleanliness Tested with catalytic converters and performance proven with turbochargers Miscible and compatible with commercially-available engine oils Approved for the following specifications: ACEA C3 API SN / CF VAG 502.00 / 505.00 BMW Longlife-01 Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555793
Part#: S54TWSKT
In Stock
Sale - Save 5% $ 134.79
$ 128.05 USD
Free Shipping
Sale - Save 5% $ 134.79
$ 128.05 USD
Free Shipping

When changing your oil, you want to make sure you are using the best. Turner Motorsport now offers our premium Castrol TWS Oil service kits to ensure you are getting the best products available for your routine oil services. Everything included has been specifically picked to ensure high quality and outstanding wear protection. 

One of the most popular engine oil choices on the market today, Castrol Edge Professional TWS 10-60 engine oil is premium engine oil approved by BMW for use in a wide variety of engines such as the M30, S54, S85, and many more. In fact, this oil is the same oil that BMW uses for their performance engines from the factory. Thanks to its premium blend of synthetic oil and additives, this oil continues to provide protection under even the harshest conditions and is perfect for both street cars and cars that see occasional track use.

Specifications:

  • SAE-10w60
  • ACEA A3/B4
  • API SN/CF
  • VW 501 01/505 00
  • Exclusive Approval for BMW M-Models

Included in this Kit:

  • Castrol TWS 10w-60 Premium Oil - 6 Liters
  • Engine Oil Drain Plug & Washer
  • Premium Oil Filter
Show More Show Less

Packaged by Turner - Corporate Logo
T#:23714967
Part#: NSERIESIGNCOILKT
In Stock
$ 191.99 USD
Free Shipping on orders $49 and up
Upgrade your BMW's engine performance with the Dinan Performance Ignition Coil Service Kit. These high-quality ignition coils are crafted to enhance ignition power, ensuring optimal engine performance and efficiency. Engineered for durability and reliability, these coils provide improved throttle response, smoother idle, and enhanced fuel efficiency. Benefit from the Dinan Performance Ignition Coil Service Kit, designed to unleash the true potential of your BMW's engine.
Show More Show Less
Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
$ 65.99 USD
Free Shipping
$ 65.99 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Packaged by Turner - Corporate Logo
T#:555435
Part#: LMOCK6KT
In Stock
Sale - Save 3% $ 87.99
$ 85.21 USD
Free Shipping
Sale - Save 3% $ 87.99
$ 85.21 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
  • Oil Filter Kit
  • Drain Plug with Crush Washer

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:24344782
Part#: E46M3RWBKT
In Stock
$ 213.99 USD
Free Shipping on orders $49 and up
A failing wheel bearing may translate into excessive vibration through the steering wheel, a noticeable hum while driving at speed, and/or a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing. This kit includes all the components commonly replaced when servicing one of the rear wheel bearings. Included: Genuine BMW Wheel Hub OEM Wheel Bearing OEM Axle Nut Genuine BMW Wheel Bearing Circlip
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5376273
Part#: N55OCIKT
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
To keep your driving machine in top shape, regular maintenance is imperative. BMW's service interval for an oil change varies based on driving habits. We recommend changing your oil after no more than 10,000 miles. A 5,000 oil service interval is preferred for aggressive or city driving. Includes seven quarts of BMW synthetic engine oil, Hengst oil filter This kit contains Seven Liters of BMW Synthetic Engine Oil Engine Oil Filter Oil Drain Plug Gasket (Included with filter kit)
Show More Show Less
Packaged by Turner - Corporate Logo
T#:555452
Part#: LMOCK27KT
In Stock
Sale - Save 3% $ 87.99
$ 85.20 USD
Free Shipping
Sale - Save 3% $ 87.99
$ 85.20 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:22130463
Part#: LMTECLLCHNGIN1KT
In Stock
$ 80.54 USD
Free Shipping on orders $49 and up
Ensuring your driving machine remains in optimal condition necessitates consistent maintenance. BMW's recommended oil change interval depends on your driving habits. We recommend changing your oil after a maximum of 10,000 miles. For those engaging in aggressive or city driving, a 5,000-mile oil service interval is preferable. This kit comprises: Seven Liters of Liqui Moly Special Tec LL Engine Oil 5w-30 Engine Oil Filter Oil Drain Plug Gasket (included with filter kit) Sustain the flawless performance of your BMW with this high-quality service kit from Turner Motorsport.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416751
Part#: 21526773670TMSKT
Ships Jul 11, 2025
Sale - Save 14% $ 274.99
$ 235.36 USD
Free Shipping
Sale - Save 14% $ 274.99
$ 235.36 USD
Free Shipping
Includes master and slave cylinder, hardware and lines including the Exact-Fit Stainless Steel Clutch Line! A leaking clutch cylinder often feels like a failing clutch or a problematic transmission, this kit includes everything needed to not only replace but upgrade your clutch hydraulic system!
Show More Show Less
Packaged by Turner - Corporate Logo
T#:5416757
Part#: 33521092362TMSKT
In Stock
Sale - Save 33% $ 114.99
$ 77.14 USD
Free Shipping
Sale - Save 33% $ 114.99
$ 77.14 USD
Free Shipping
Complete rear upper shock mounting kit includes everything you need to replace old, hardened mounts with new heavy duty replacements. Body seals, hardware, and reinforcement plates are included. Kit includes: Heavy-duty, German-made Lemfoerder rear shock mounts from the E46 M3 Elring shock mount gaskets Heavy-duty rear shock mount reinforcement plates Locking nuts Select your vehicle for additional fitment information. **Note** Upper damper nuts vary in size from shock to shock. If you wish to replace them please measure your damper and source accordingly.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:17073598
Part#: 11537549476KT
Ships Sep 23, 2025
Sale - Save 30% $ 410.99
$ 287.55 USD
Free Shipping on orders $49 and up
Sale - Save 30% $ 410.99
$ 287.55 USD
Free Shipping on orders $49 and up
Includes everything you may need to replace your water pump and thermostat.

Packaged by Turner - Corporate Logo
T#:15677547
Part#: 007237SCH01A-KT
In Stock
Sale - Save 15% $ 145.21
$ 123.43 USD
Free Shipping on orders $49 and up
Sale - Save 15% $ 145.21
$ 123.43 USD
Free Shipping on orders $49 and up
Braking systems aren't indestructible, they require proper maintenance and care to keep contaminants and moisture free from the system. A full brake fluid flush is recommended to be performed at every 2 years or 30,000 miles, whichever occurs first (Intervals may vary for vehicles used on the track, check fluid specifications for more details). A proper flush removes debris left in the system from failed seals or deposits and ensures that the system is moisture free, to help prevent future rust or clogging issues. This kit includes everything you need to perform a proper brake fluid flush and refill using a fluid that features a greater boiling point for performance based applications. Includes: Schwaben European Pressure Bleeder Schwaben Catch Bottle Set Ate TYP 200 DOT 4 Brake Fluid - 1 Liter Schwaben Brake Bleeder Wrench **A typical flush only requires 1 liter of fluid to replace all of your old brake fluid.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:402762
Part#: M50LMOCP1
In Stock
Sale - Save 4% $ 122.99
Starting at $ 118.34 USD
Free Shipping
Sale - Save 4% $ 122.99
Starting at $ 118.34 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

1990-1996 E34 525i
1991-2000 E36 320i 323i 323ti 325i 328i 328is
1995-2004 E39 520i 523i 525i 528i 530i
1997-2002 E36/7 Z3 2.0i Z3 2.2i Z3 2.5i Z3 2.8 Z3 3.0i
1998-2006 E46 320I 320Ci 323i 323ci 325i 325xi 325Ci 328i 328Ci 330i 330xi 330Ci
1995-2000 E38 728i 728iL 
2002-2005 E85 Z4 2.2i Z4 2.5i Z4 3.0i
2003-2005 E60/E61 520i 525i 525xi 530i
2003-2006 E83 X3 2.5i X3 3.0i 
2000-2006 E53 X5 3.0i
2002-2005 E65/E66 730i 730Li

 

Show More Show Less

Packaged by Turner - Corporate Logo
T#:22789662
Part#: OILCHGN5XKT
In Stock
Sale - Save 3% $ 101.99
$ 98.89 USD
Free Shipping on orders $49 and up
Sale - Save 3% $ 101.99
$ 98.89 USD
Free Shipping on orders $49 and up

Ensure your driving machine's peak performance with regular maintenance. Turner Motorsport offers a comprehensive service kit to keep your BMW in top shape. With varying oil change intervals based on driving habits, this kit includes:

  • Seven Liters of BMW Synthetic Engine Oil
  • Engine Oil Filter
  • Oil Drain Plug Gasket (Included with filter kit)

For optimal results, we recommend an oil change every 10,000 miles, or every 5,000 miles for aggressive or city driving. Trust Turner Motorsport to provide the quality and precision your BMW deserves.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:392550
Part#: S54RBPDK
In Stock
Sale - Save 14% $ 442.99
Starting at $ 382.79 USD
Free Shipping
Sale - Save 14% $ 442.99
Starting at $ 382.79 USD
Free Shipping
Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).
Show More Show Less

Packaged by Turner - Corporate Logo
T#:555448
Part#: LMOCK22
In Stock
Sale - Save 3% $ 99.99
$ 96.93 USD
Free Shipping
Sale - Save 3% $ 99.99
$ 96.93 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

7 Liters of Liqui Moly 0w-40 Voll-Synthese Energy Oil
Hengst Oil Filter Kit
Febi Oil Drain Plug & Washer

Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

Meets the following requirements;

  • ACEA A3-98/B3-98
  • API SJ-CF
  • BMW [Longlife] LL-98
  • Daimler (MB 229.1)
  • VW 502.00 - 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less

Packaged by Turner - Corporate Logo
T#:402692
Part#: N54LMOCP1
In Stock
Sale - Save 3% $ 133.99
Starting at $ 129.41 USD
Free Shipping
Sale - Save 3% $ 133.99
Starting at $ 129.41 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

2006-2012 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2005-2009 E60/E61 525i 525xi 528i 528xi 530i 530xi 535i
2005-2008 E85/E86 Z4 2.5i Z4 3.0si
2010-2016 F10 520i 520Li 523i 525Li 528i
2009–2017 F10/F11/F07 535i
2009-2016 E89 Z4 sDrive18i Z4 sDrive20i Z4 sDrive23i 2008-2011 Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2005-2010 E83 X3 2.5si xDrive25i X3 3.0si 
2007-2013 E82/E88 125i 128i 135i 135is
2011 E82 1 Series M Coupe
2009-2011 E84 X1 X1 xDrive/sDrive20i xDrive25i X1 xDrive28i X1 xDrive/sDrive28i xDrive35i
2004-2010 E63/E64 630i
2006-2012 E87 130i
2010+ F25 X3 sDrive18i X3 xDrive20i X3 28i X3 xDrive28i X3 xDrive35i
2006-2013 E70 X5 3.0si xDrive30i X5 xDrive 35i
2008–2014 E71 X6 xDrive35i
2008–2015 F01 740i 740i/Li
2011–2015 F30/F31 335i
2011–2016 F30 320i 328i
2013–2016 F32/F33/F36 435i
2014+ F15 X5 xdrive 35i
2014+ F16 X6 xDrive35i
2014+ F26 X4 xDrive 35i X4 M40i
2011+ F06/F12/F13 640i
2012–2016 F20/F21 M135i
2012–2017 F20 125i
2013–2016 F22/F23 M235i
2014+ F22 220i 225i 228i
2016+ F87 M2
2013–2016 F34 320i GT
2013–2016 F34 328i GT
2014–2017 F26 X4 xDrive20i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555449
Part#: LMOCK23KT
Ships on Aug 8, 2025
Sale - Save 5% $ 119.99
$ 113.93 USD
Free Shipping
Sale - Save 5% $ 119.99
$ 113.93 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
Liqui Moly UV Flashlight
Hengst Oil Filter Kit
ECS Tuning Magnetic Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555429
Part#: LMOCK4KT
In Stock
Sale - Save 3% $ 88.99
$ 86.26 USD
Free Shipping
Sale - Save 3% $ 88.99
$ 86.26 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application. 

Includes:

  • 7 Liters of Longtime High Tech Engine Oil 5w-30
  • Hengst Engine Oil Filter
  • Oil Drain Plug & Gasket

Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • BMW Longlife-04
  • MB-Approval 229.51
  • VAG 502.00 / 505.00

Recommended for the following specifications:

  • ACEA A3 / B4
  • MB 229.31
  • VAG 505.01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less


Packaged by Turner - Corporate Logo
T#:557341
Part#: 11111318185TMSKT
In Stock
Sale - Save 14% $ 82.22
$ 70.34 USD
Free Shipping
Sale - Save 14% $ 82.22
$ 70.34 USD
Free Shipping

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

Show More Show Less
Packaged by Turner - Corporate Logo
T#:555447
Part#: LMOCK21KT
In Stock
Sale - Save 4% $ 83.99
$ 80.95 USD
Free Shipping
Sale - Save 4% $ 83.99
$ 80.95 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication!   Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

  • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
  • Mann Engine Oil Filter
  • Febi Oil Drain Plug & Gasket

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Show More Show Less
High-Performance Ignition Service Kit - BMW N52 3.0L
For vehicles with production date from 04/2006
Packaged by Turner - Corporate Logo
T#:583536
Part#: N52PISKT
In Stock
Sale - Save 20% $ 262.99
$ 210.05 USD
Free Shipping
Sale - Save 20% $ 262.99
$ 210.05 USD
Free Shipping

Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less

Packaged by Turner - Corporate Logo
T#:582210
Part#: S54WVALVESHIMKT
In Stock
Sale - Save 10% $ 214.06
$ 191.75 USD
Free Shipping
Sale - Save 10% $ 214.06
$ 191.75 USD
Free Shipping

Packaged by Turner - Corporate Logo
T#:578658
Part#: 65816905133-1KT
In Stock
Sale - Save 31% $ 90.42
$ 62.08 USD
Free Shipping
Sale - Save 31% $ 90.42
$ 62.08 USD
Free Shipping
Onboard computer not reading accurate ambient temperatures anymore? This kit includes everything you need to restore external temp monitoring to your BMW.
Packaged by Turner - Corporate Logo
T#:22130457
Part#: OILCHNGCASTROLKT
In Stock
Sale - Save 6% $ 130.99
$ 123.78 USD
Free Shipping on orders $49 and up
Sale - Save 6% $ 130.99
$ 123.78 USD
Free Shipping on orders $49 and up
For your BMW E46, Z3, or Z4 Ultimate Driving Machine to maintain peak performance, Turner Motorsport advises conducting oil changes every 5,000 to 10,000 miles, adjusting the frequency based on your driving habits. Regular inspections are crucial for prolonging your vehicle's lifespan and ensuring it operates smoothly. Turner Motorsport is your trusted partner in preserving your car's excellence. Explore the "Kit Contents" tab to view the list of components included. Interested in crafting your own service kit? Turner Motorsport provides a comprehensive selection of filters and oils from various reputable brands, available right here on our website. We've got everything you need to customize your maintenance package.
Show More Show Less

Packaged by Turner - Corporate Logo
T#:340364
Part#: TMS206099
In Stock
Sale - Save 17% $ 450.99
Starting at $ 372.40 USD
Free Shipping
Sale - Save 17% $ 450.99
Starting at $ 372.40 USD
Free Shipping
This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:
  • OEM electric water pump, p/n 11517586925.
  • aluminum mounting screws for water pump (set of 3), p/n 11510392553
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537521049
  • OEM-style hose clamps for hose (x 2)
    BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N51/N52 engine:
    2008-2013 E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
    2006-2010 E83 BMW X3 3.0i X3 3.0si
    2006-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:582218
    Part#: 83300493743
    In Stock
    Sale - Save 10% $ 244.26
    $ 219.83 USD
    Free Shipping
    Sale - Save 10% $ 244.26
    $ 219.83 USD
    Free Shipping
    BMW recommends valve adjustments every 30k miles on your S54-equipped BMW. We have all the parts you will need to do the job in one discounted package for your BMW E46 M3, Z3, or Z4! Kit includes: 11127832034 x 1 - Valve Cover Gasket 11127831271 x 6 - Spark Plug Hole Gasket 11121437395 x 2 - Valve Cover Seal Washer Grommet 11127830972 x 13 - Valve Cover Nut Grommet VSK4 Wiseco x 1 - Valve Shim Set 83300493743 x 1 - Valve Shim Tool *Click here for valve adjustment instructions* This item fits the following BMWs: 2001-2006 E46 BMW M3, M3 Convertible2001-2002 Z3 BMW M Roadster M Coupe2006-2008 Z4 BMW Z4 M Roadster M Coupe
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:401664
    Part#: VSK4KT2
    In Stock
    Sale - Save 10% $ 143.29
    $ 128.96 USD
    Free Shipping
    Sale - Save 10% $ 143.29
    $ 128.96 USD
    Free Shipping

    Proper valve lash adjustment is critical for longevity and performance. If your S54 is due for valve adjustment maintenance you can do it yourself with this kit, saving hundreds of dollars in labor charges. 

    Includes

    • Shim set 
    • Installation tool #83300493743
    • 16 Blade Feeler gauge set 

    BMW recommends S54 valve inspection and adjustment every 30k miles.

    *Click here for valve adjustment instructions*

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:402736
    Part#: S54LMOCP1
    In Stock
    Sale - Save 3% $ 129.99
    Starting at $ 126.54 USD
    Free Shipping
    Sale - Save 3% $ 129.99
    Starting at $ 126.54 USD
    Free Shipping

    Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

    Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

    Synthoil Race Tech GT1 is the modern high performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exceptional lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines. Turner recommends Race Tech GT1 for your ///M car.

    Choose the level of Liqui Moly Oil Service your BMW deserves: 

    • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
    • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
    • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
    • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

    Below you can add new drain plug and crush washer, along with your choice of oil filter.

    This kit also features many Popular Service Tools that make your life easier when working on your BMW:

    • Turner Motorsport Magnetic Fender Cover
    • Schwaben 6.5L Fluid Extractor
    • Schwaben 14mm/17mm Service Wrench
    • Schwaben Professional BMW/MINI Scan Tool

    Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

    These products fit the following BMWs:

    2001 - 2006 E46 M3
    2000-2002 E36/7 M Roadster M Coupe
    2006-2008 E85 M Roadster M Coupe 

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:25805743
    Part#: 11367585425TKT
    Ships in 1-3 days
    Sale - Save 30% $ 133.99
    $ 93.24 USD
    Free Shipping on orders $49 and up
    Sale - Save 30% $ 133.99
    $ 93.24 USD
    Free Shipping on orders $49 and up
    Failed solenoid valves can lead to numerous issues, such as sluggish acceleration, rough idle, loss of power, limp mode, and check engine lights. Luckily, these issues are easily fixed with our budget-friendly VANOS Solenoid Valve Kit. This kit contains two URO brand VANOS Solenoids, two sets of OEM Elring gaskets, and two Genuine BMW mounting bolts, all for less than the price of a single Genuine BMW Solenoid.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5376274
    Part#: 11517586925TKT
    Ships Sep 23, 2025
    Sale - Save 30% $ 437.99
    $ 306.31 USD
    Free Shipping
    Sale - Save 30% $ 437.99
    $ 306.31 USD
    Free Shipping
    Everything you need to replace your water pump and thermostat. The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. The aftermarket kit offered provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road. Kit includes: Mahle-Behr thermostat Water pump Genuine BMW coolant thermostat to water pump hose Mounting hardware required for both the thermostat and water pump
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:5403232
    Part#: 31226757024TMSKT
    In Stock
    $ 265.99 USD
    Free Shipping
    $ 265.99 USD
    Free Shipping
    Includes left and right bearing, nuts, dust caps and Schwaben 46mm socket for ease of installation A failing wheel bearing may translate excessive vibration through the steering wheel, a noticeable hum while driving at speed, and a groan or clunking while turning. If you are experiencing any of these symptoms, your wheel bearing may be failing.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338100
    Part#: 33411090505
    In Stock
    Starting at $ 53.98 USD
    Free Shipping on orders $49 and up
    Starting at $ 53.98 USD
    Free Shipping on orders $49 and up
    This is a replacement rear wheel bearing for all:
    1992-1998 E36 BMW M3
    1999-2005 E46 BMW 325xi 330i 330ci 330xi M3
    1995-2001 E38 BMW 740i 740il 750il
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    1997-2002 Z3 BMW M Roadster M Coupe
    2003-2008 E85 BMW Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster


    Rear wheel bearings are sold individually, and 2 are required per car.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:401625
    Part#: 11111318185KT
    In Stock
    Sale - Save 14% $ 82.22
    $ 70.34 USD
    Free Shipping
    Sale - Save 14% $ 82.22
    $ 70.34 USD
    Free Shipping

    When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem. 

    The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking. 

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:24212302
    Part#: 26112226527TKT
    Ships on Aug 11, 2025
    Sale - Save 10% $ 136.99
    $ 123.06 USD
    Free Shipping on orders $49 and up
    Sale - Save 10% $ 136.99
    $ 123.06 USD
    Free Shipping on orders $49 and up
    Comes with a flex disc (giubo), and all essential mounting hardware to ensure a complete and secure driveshaft installation.

    Packaged by Turner - Corporate Logo
    T#:23847539
    Part#: ECS6PISTONBBKKT
    In Stock
    $ 2,560.01 USD
    $ 2,560.01 USD

    Upgrade your BMW's braking performance with the ECS Big Brake Kit, designed to deliver enhanced stopping power and reduced brake fade. This comprehensive kit includes 6-piston calipers from the E82, E88, and the E9X BMW Performance big brake kit, along with original equipment pads for optimal braking efficiency. The package also incorporates 325x25 ECS 2-piece rotors, ECS caliper brackets, Exact Fit braided stainless reinforced brake lines, essential hardware, and one liter of Pentosin Super DOT4 Brake Fluid.

    Key Benefits:

    • Enhanced braking performance with reduced brake fade
    • Includes 6-piston calipers and original equipment pads for improved efficiency
    • Incorporates ECS 2-piece rotors and caliper brackets for better functionality
    • Exact Fit braided stainless reinforced brake lines for durability
    • Comprehensive hardware and Pentosin Super DOT4 Brake Fluid included

    The ECS Big Brake Kit ensures that brake bias remains stable, making it suitable for various applications. For track use, consider pairing with a more aggressive rear pad. These calipers are compatible with most 17” wheels; however, please refer to the attached template for fitment verification. Additionally, follow the attached installation guide for replacing the OEM caliper carrier with the ECS caliper carrier.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:5389759
    Part#: E46M3SVCTMSKT
    In Stock
    Sale - Save 9% $ 156.99
    $ 142.29 USD
    Free Shipping
    Sale - Save 9% $ 156.99
    $ 142.29 USD
    Free Shipping
    Everything needed for a complete oil service including TWS Edge Supercar oil and a OEM filter To keep your Ultimate Driving Machine performing flawlessly, Turner recommends performing oil changes every 5,000-10,000 miles, depending on driving habits. Doing all of the necessary inspections will keep your vehicle running much longer and cleaner. Turner Motorsport is here to help you keep your car in great condition. Kit includes: - Drain plug and washer - Oil filter and gaskets - 6x 1 liter Castrol Edge TWS engine oil 10w-60 - Oil change sticker
    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:554529
    Part#: N5XATSKT
    In Stock
    Sale - Save 10% $ 215.99
    $ 194.19 USD
    Free Shipping
    Sale - Save 10% $ 215.99
    $ 194.19 USD
    Free Shipping

    Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. 

    Kit Includes:

    • Automatic transmission oil pan with integrated filter 
    • Oil pan gasket
    • Drain plug with sealing washer
    • Fill plug with sealing washer
    • 7 quarts Redline D4 automatic transmission fluid

    Fits the following BMWs:
    E84 BMW
    X1 xDrive35i
    E90 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission), 330i/xi, 335i/xi
    E91 BMW 325i/xi, 328i/xi (with GA6HP19Z automatic transmission)
    E92 BMW 328i/xi (with GA6HP19Z automatic transmission), 335i/x
    E93 BMW 328i (with GA6HP19Z automatic transmission),  335i
    E60 BMW 525i/xi, 528i/xi, 530i/xi, 535i/xi
    E61 BMW 525i, 530xi, 535xi
    E70 BMW X5 xDrive30i
    E71 BMW X6 35iX
    E82/88 BMW 128i(with GA6HP19Z automatic transmission), 135i (N54)
    F01/02 BMW 740i/Li
    E85/86/89 BMW Z4 3.0i/Si sDrive30i M54 N52

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:338075
    Part#: 31222229501
    In Stock
    $ 179.99
    Starting at $ 179.42 USD
    Free Shipping
    $ 179.99
    Starting at $ 179.42 USD
    Free Shipping

    E46 M3, Z4 M Front Wheel Hub Assembly with Bearing. This is an OEM Wheel Bearing Hub Assembly. Available from FAG or GSP. Both meet all of the OE specifications for fitment and life.

    FAG is an OE supplier to BMW as well as several other German marques. (SKF does not have a front bearing assembly for the E46 M3).

    GSP is a high-quality supplier for aftermarket suspension components. They have quickly position themselves as an industry leader, and pride themselves on offering high-quality alternatives to their expensive OEM counterparts.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:401683
    Part#: 65816905133KT2
    In Stock
    Sale - Save 31% $ 90.42
    $ 62.08 USD
    Free Shipping
    Sale - Save 31% $ 90.42
    $ 62.08 USD
    Free Shipping

    The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

     

    Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

    Show More Show Less

    Packaged by Turner - Corporate Logo
    T#:583532
    Part#: S54PISKT
    In Stock
    $ 277.99 USD
    Free Shipping
    $ 277.99 USD
    Free Shipping

    Every 60-80,000 miles, we recommend replacing your spark plugs to ensure your ignition system is running optimally. Over time carbon can build up around the head of the spark plug and decrease spark strength and effectiveness, leading to weaker fuel mixture detonation, misfires, and potential check engine lights. To prevent this, have put together our High-Performance Ignition Service Kits. These kits include new Bav Auto High-Performance Ignition Coils, new spark plugs, dielectric grease, and a BMW spark plug service label to keep track of when your spark plugs were replaced.

    Bav Auto's Ignition coils feature core windings that have been modified to increase firepower and promote a faster, more efficient burn. This gives your BMW/MINI increased torque in the lower range of RPM and more horsepower in the upper range. Exact improvements depend on the current condition of your engine, but you'll definitely feel the difference. They'll also improve your fuel economy.

    From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

    As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:556738
    Part#: N52TISKT
    In Stock
    $ 268.99 USD
    Free Shipping
    $ 268.99 USD
    Free Shipping

    Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

    To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

    See kit contents below for a complete list of included components.

    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:6181662
    Part#: TWH9905005T
    In Stock
    Sale - Save 3% $ 123.99
    Starting at $ 120.27 USD
    Free Shipping
    Sale - Save 3% $ 123.99
    Starting at $ 120.27 USD
    Free Shipping
    5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less


    Packaged by Turner - Corporate Logo
    T#:6181664
    Part#: TWH9905003T
    In Stock
    Sale - Save 3% $ 138.99
    Starting at $ 134.82 USD
    Free Shipping
    Sale - Save 3% $ 138.99
    Starting at $ 134.82 USD
    Free Shipping
    7.5MM (.30 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4 Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems -- Correct wheel offset issues Achieve a flush fitment instead of the "tucked under" look Clearance the wheel from contact with other components (suspension, brakes, etc). Improve handling and stability by increasing track width A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required. This latest generation of the Turner Motorsport Wheel Spacers represents a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is lightweight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better-engineered wheel spacer on the market! Turner Wheel Spacer Features -- hub-centric design, 1-piece spacer with hubcentric lip precise tolerance fitment thanks to CAD process and CNC mill machine aerospace grade aluminum lightweight but very strong with high resistance to corrosion additional military-spec hardcoat for further corrosion resistance innovative Quick Release pockets for easy removal (better than a chamfered back edge) laser engraved size and part number for easy identification stealthy anthracite or black color extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available) Turner Motorsport track and street tested! Made in the USA Extended Wheel Bolts Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are very high quality and high-grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing. Wheel Spacer Tech & FAQ: How To Measure for Spacers Wheel Spacer Encyclopedia - everything you wanted to know Spacer Specs: bolt pattern: 5 x 120 center bore: 72.6mm hubcentric: yes wheel pad size: normal Year & Model Applications : 2008-2012 E82 BMW 128i 135 1M 1988-1991 E30 BMW M3 1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan 2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe 2007-2012 E93 BMW 328i 335i M3 - Convertible 1976-1981 E12 BMW 528i 530i 1982-1988 E28 BMW 524td 528e 533i 535i 535is M5 1989-1995 E34 BMW 525i 530i 535i 540i M5 2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5 1982-1989 E24 BMW 633csi 635csi M6 2004-2010 E63 BMW 645ci 650i M6 1981-1987 E23 BMW 733i 735i 1988-1994 E32 BMW 735i 735il 740i 740il 750il 1995-2001 E38 BMW 740i 740il 750il 1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi 1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe 2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:339943
    Part#: E46-MY-DIFF
    In Stock
    Starting at $ 43.99 USD
    Free Shipping on orders $49 and up
    Starting at $ 43.99 USD
    Free Shipping on orders $49 and up
    These rubber bushings from Meyle are a direct replacement for the stock differential bushings in the E46 3-series, E83 X3 SAV, and Z4 Roadster. If your original bushings are worn (likely around 100,000 miles) these are a great replacement upgrade. The front bushings are the stock OEM type rubber bushings. The rear bushing is a Meyle HD upgrade over stock - about 15% stiffer than the originals. This means the bushing will not flex and twist as much. This puts more power to the wheels since power is no longer used up for 'torquing' the bushing. These are not race bushings; the rubber material is perfectly suitable for street use.

    The non-M E46/E83/Z4 models use three differential mounts - two front bushings in the subframe and one rear mount in the diff cover. This set of bushings covers all three. You can opt to include new mounting hardware in the Options list below.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Roadster
    Show More Show Less