BMW Interior Parts for BMW E9 3.0CS M30 3.0L

Clear BMW chassis
The interior of your BMW is where you will hopefully spend most of your time, so it should be ergonomic, comfortable, and safe. All interior components, from OEM replacement switches, trim, or steering wheels, to aftermarket upgrades like racing wheels, safety equipment, and racing seats, are available at Turner Motorsport.

Recaro Universal Seat Sliders
Recaro - Corporate Logo
T#:338212
Part#: 0.70.X
On Order, ETA May 20, 2019
Starting at $135.00
Starting at $135.00
If you want fore-aft adjustment on your Recaro seat you will need a set of sliders. These are the genuine Recaro sliders that are some of the finest quality that we have seen. The sliders fit between the vehicle adapter and the seat brackets. There are two types depending on how your floor adapters work - without tabs and with tabs.

Recaro Seat Slider types -
Without Tabs - offers the lowest possible seating position - the total height of the sliders is 22mm (7/8"); the sliders are sandwiched between the floor mount and seat; the bolts install to the floor mount perpendicular to the ground; works with flat Macht Schnell or VAC style floor mounts only.
With Tabs - the sliders have tabs on each end with three height positions; the positions allow height and rake adjustments but means it's taller than the version without tabs - total height with the tabs is 58mm (2.25"); the tabs mean the mounting bolts install parallel to the ground; some floor mounts require the tab style (Wedge Engineering for example).

The Recaro sliders are all steel - pulling the handle moves teeth on two tracks which is more secure and stable than a single track. This set of sliders has the bar on the inside of the track (the most common for BMW fitments).

Sold per seat.
Turner Motorsport Racing Aluminum Pedal Set for Manual Transmission
Turner Motorsport - Corporate Logo
T#:339007
Part#: TMS339007
In Stock
Starting at $112.95
Free Shipping
Starting at $112.95
Free Shipping

These aluminum pedals were designed with one thing in mind -- performance. We wanted a pedal set that gave us the grip EXACTLY where we wanted it: MASSIVE GRIP on the brake and clutch pedals, and far less grip on the accelerator to allow the right foot to better slide/move during heal-toe braking. This set surpasses all others in this area, giving your BMW's foot operated controls a more tactile feel and response. The brake and clutch pedals feature pyramid shaped spikes, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface.

These pedals are 100% MADE IN THE USA, and are CNC machined from aircraft quality aluminum billet to perfectly fit your BMW. There's no rubber to wear out, and no cosmetic finishes to chip or flake off. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), manual transmission BMWs only (including SMG and DCT sequential manual gearboxes -- on these cars, you will only use one of the included clutch/brake sized pedals).

Now available in (optional) black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

 

Genuine BMW Led Interior Light Package - Set of 10
Genuine BMW - Corporate Logo
T#:21352
Part#: 63122212788
In Stock
14% off MSRP $171.00
$146.52
Free Shipping
14% off MSRP $171.00
$146.52
Free Shipping
These original BMW LED lights cover anything from a reading light, a foot well light or even an under door light and are white in color. The daylight white light colour conveys a modern ambience and pleasant brightness. A specially calibrated lens creates a radiance comparable to that of a light bulb. In addition to their bright white appearance, they offer ultra-low energy consumption, an extremely long service life and optimized brightness. Includes 10 LED modules - 6 for interior/reading light, and 4 for footwell and door lights. The LED module can be plugged directly into the existing socket. Replaces W3W, W5W and W6W lamps with T10 base.

Features
  • Attractive, high quality design
  • Bright white light
  • Extremely long service life
  • Ultra-low energy consumption
  • Customized look at an affordable price
  • Universal – can be used in almost any BMW
  • Proper testing and approval by BMW of North America

  • Dinan Automatic Transmission Alumnium Pedal Cover Set
    Dinan - Corporate Logo
    T#:389437
    Part#: D700-0001
    Direct Ship
    $189.52
    Free Shipping

    Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.

    For cars with automatic transmission.


    Seatbelt 3-point Receptacle - Macht Schnell
    Macht Schnell - Corporate Logo
    T#:338504
    Part#: 79.12.12X
    On Order, ETA May 24, 2019
    Starting at $125.00
    Free Shipping
    Starting at $125.00
    Free Shipping
    Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    EVO Series Digital Water Temperature Gauge - 80-280°F
    Prosport Performance - Corporate Logo
    T#:389633
    Part#: 216EVOWT.F
    In Stock
    $60.00
    $60.00

    The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

    Kit Includes:

    • Digital Water Temperature Guage (80-280 degrees) 
    • Instructions
    • Mounting hardware
    • Decals
    • Temperature sender - 1" long with 1/8" NPT threads
    • Dual color display (Blue or red)

    H3R Performance HalGuard™ Clean Agent 2.5lb Fire Extinguisher - Black
    H3R Performance - Corporate Logo
    T#:402686
    Part#: HG250B
    In Stock
    $224.95
    Free Shipping

    Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

    The HalGuard™ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain Halotron® 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

    Features:

    • No thermal shock to electronics
    • No mess or damage to vehicle or surfaces
    • Liquefied gas extinguishes hard-to-reach fires
    • Does not impair operator's vision
    • EPA approved
    • Listed and rated 2B:C by Underwriters Laboratories
    • Rechargeable
    • Made in U.S.A.
    • 2-strap mounting bracket
    • 6' - 10' discharge range
    • High quality steel cylinders
    • All metal valve construction
    • Compact, lightweight, easy to use
    • Five year limited warranty

    Specifications:

    • Extinguishing Agent  --  Halotron® 1
    • Agent (lb.)  --  2.5
    • Gross Weight (lb.)  --  5.4
    • U/L Rating  --  2 B:C
    • Height (inches)  --  14.8
    • Width (inches)  --  5.0
    • Depth-diameter (inches)  --  3.0
    Rennline Steering Wheel Quick Disconnect - Black
    Rennline - Corporate Logo
    T#:557127
    Part#: I18BLACK
    In Stock
    $375.00
    $375.00

    Looking for the highest quality steering wheel quick release on the market? Well this is it. This hub has a tapered asymmetrical socket that eliminates chances of looseness as the hub breaks in, a feature not normally found on competitor's quick disconnects. Also, Rennline Quick Releases are equipped with spring loaded roll pins that allow for seamless one hand removal, which is essential for emergency situations. 

    All components are machined from anodized 7075 aircraft grade aluminum. The mounting plates are designed to work with all standard 6-bolt mounting patterns used by steering wheel manufacturers such as OMP, Momo, Sparco, and Renown.

    This unit measures 2.3" tall.

    Installation instruction HERE


    EVO Series Digital Oil Temperature Gauge - 100-300°F
    Prosport Performance - Corporate Logo
    T#:389634
    Part#: 216EVOOT.F
    On Order, ETA May 21, 2019
    $60.00
    $60.00

    The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

    Kit Includes:

    • Digital Oil Temperature Guage (100-300 degrees) 
    • Instructions
    • Mounting hardware
    • Decals
    • Temperature sender - 1" long with 1/8" NPT threads
    • Dual color display (Blue or Red)

    Brey-Krause Quick Release Fire Extinguisher Mount - 3"
    Brey-Krause - Corporate Logo
    T#:396272
    Part#: R-9520
    Ships in 3 Business Days
    $241.50
    Free Shipping

    The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware. 

    Mount holds any 3" fire extinguisher

    Side Mounts - Motion Motorsport Slotted
    Motion Motorsport - Corporate Logo
    T#:340349
    Part#: MM-SIDE-
    Ships in 8 Business Days
    Starting at $129.95
    Free Shipping
    Starting at $129.95
    Free Shipping
    Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

    One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

    Price is for one pair of side mounts.
    BMW Motorsport Seat Belt Shoulder Pad Set
    Genuine BMW - Corporate Logo
    T#:340352
    Part#: MSBELT50MM
    Ships on Jun 13, 2019
    Starting at $103.14
    Free Shipping
    Starting at $103.14
    Free Shipping
    These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.


    Turner Motorsport 45mm Boost Gauge - Blue & White
    Turner Motorsport - Corporate Logo
    T#:396856
    Part#: 022987TMS01A-02K
    On Order, ETA May 20, 2019
    $149.95
    Free Shipping

    With all the high-end gauges flooding the market today (don't get us wrong, we love those too!) we felt compelled to offer a driver-oriented gauge that communicated a simple parameter - boost. Featuring an an amber backlight and needle, the Turner Boost Gauge pairs well with interior and gauge lighting. With a typeface to match BMW's conventional gauge style, even the choosiest enthusiast will be comfortable installing this gauge. We also decided to stay with a more traditional style gauge to maintain a classic Motorsport look while perfectly matching your interior so nothing seems out of place.

    Having a boost gauge in your car will provide you with a view on where your car is performing when dialing in after upgrades or even diagnose a performance related issue such as a boost leak. Our gauge provides a view on where your boost levels are at under certain RPM's allowing you to make adjustments for top performance. 

    Features:

    • Amber back light and BMW-style typeface to perfectly match your interior 
    • Boost reading up to 30psi & down to 30 In-Hg
    • Installs easily in a variety of 45mm gauge pods
    • Includes wiring harness and installation hardware

    This item fits the following BMWs: 
    Covers all BMW's with forced induction either included or added to the vehicle

    *For vehicles with the S55 and N55 engine, we recommend purchasing the P3Cars Boost Tap kit for increased boost line length*