BC Racing BR Series Coilover Suspension Kit - BMW E90/92 M3 (W/ EDC) ...

For vehicles originally equipped with EDC

For vehicles with EDC from factory, requires EDC cancellation kit sold separately

T#:555854

Part#: I-13-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

7k Front & 14k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - BMW E90/92 M3 (W/ EDC) ...

For vehicles originally equipped with EDC

T#:568105

Part#: I-13E-BR

Ships on Dec 1, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - BMW E90/92 M3 (W/ EDC) ...

For vehicles originally equipped with EDC

T#:598266

Part#: I-13-DS

Ships on Dec 1, 2026

$ 1,415.00 USD

Add to Wish List

Qty

$ 1,415.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - E90 E92 M3 (without EDC...

For vehicles without EDC

T#:555837

Part#: I-39-BR

Ships in 5 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you.

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below.

Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically.

The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability.

All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection.

Specs and Features:

7k Front & 14k Rear Spring Rate
S-Barrel front & Linear rear springs
Valved specifically to spring style and rate
Camber Plate Front Mounts
Aluminum and Rubber Rear Mounts
Black Powder Coated Components
All OE style brackets and mounting for perfect fit
30 Levels of Simultaneous Compression and Rebound Dampening
2 inch minimum and 3+ Inches of total potential drop
Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilovers - E90 E92 M3 (without EDC) ...

T#:568086

Part#: I-39E-BR

Ships on Dec 1, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. Specs and Features: 6k Front & 12k Rear Spring Rate V-Barrel front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Front Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening Extreme Drop version allows additional 1-1.5" lowering over the standard 2-4" lowering from traditional BR suspension kits Shocks are 1" shorter in length and springs are specifically selected for greater lowering capabilities Great for Track, Street, and any other conditions

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

For vehicles originally equipped with EDC

For models originally WITH EDC

T#:4333516

Part#: I-13-ZR

Back Ordered

$ 2,835.00 USD

Add to Wish List

Qty

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing ZR Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333517

Part#: I-39-ZR

Back Ordered

2% off MSRP $ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

Qty

2% off MSRP

$ 2,895.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,835.00 USD

Add to Wish List

BC Racing's new ZR Series Coilovers bring a 3-way adjustable track ready coilover system to racers from novice to pro for a price not seen before in the performance suspension market. Each ZR Series Coilover system offers independent low speed and high speed compression adjustment and separate rebound adjustment. They also offer full height adjustability independent of piston travel and spring preload. On cars with McPherson struts the ZR Series comes standard with an inverted monotube damper with the steel braided Teflon coated line exiting the top of the damper to the external reservoirs that can be remotely mounted in the engine bay or boot. The ZR Series kits offer 30 clicks of rebound adjustment, 15 clicks of low speed compression adjustment, and 12 clicks of high speed compression. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminum components (top mounts, locking collars etc.) are anodized and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc.) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: * 3-way adjustable damping controls * External reservoir * Engineered for 100% track use * Inverted damper design. (depending on models) * Dual Piston design. (1 in res., 1 in shock) * Teflon coated steel braided lines for external reservoir on inverted dampers and solid stem for double A-arm cars * Custom spring rates available * Completely rebuildable * Monotube damper design * Patented concave lower locking collar * 1 year manufacturer warranty

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For models originally WITHOUT EDC

T#:4333548

Part#: I-39-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - Without Rear Pillowball...

For vehicles originally equipped with EDC

For models originally WITH EDC

T#:4333547

Part#: I-13-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - BMW E90/92 M3 (W/ EDC) ...

For vehicles originally equipped with EDC

T#:47439373

Part#: I-13-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

SPL Parts Spherical Rear Lower Control Arm Inner Bushing

T#:26904956

Part#: SPLRLBIE9X

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

Show More Show Less

BMW E9X M3 Swift Springs - 1"F 0.7"R

T#:585408

Part#: 4X903R

In Stock

$ 372.99 USD

Add to Wish List

Qty

$ 372.99 USD

Add to Wish List

Experience the Superior Performance of Swift Springs

Not all springs are made equal, and Swift Springs has invested years of expertise and research into perfecting the art of spring manufacturing. The result of their dedication is the innovative "HS5.TW" proprietary steel alloy, which sets a new standard in the world of springs. Swift Springs has successfully achieved several crucial objectives with this material, including:

Consistently maintaining the spring rate throughout the stroke
Offering the maximum possible stroke length
Providing outstanding durability to prevent spring height loss
Creating exceptionally lightweight springs

Founded in 1997, Swift Springs has built an impressive track record, catering to diverse applications ranging from oval track and dirt racing to the needs of enthusiastic street drivers. With a wealth of experience and a history of collaboration with world-class race teams and drivers, Swift Springs ensures they have the perfect spring to meet any demand.

Show More Show Less

SPL Parts Titanium Series Front Tension Rod Pair - E9X E8X F8X ...

T#:553657

Part#: SPLTRE9X

In Stock

$ 629.00 USD

Add to Wish List

Qty

$ 629.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium qulaity products that are perfect to get your car back in spec.

Show More Show Less

Front Swaybar Endlinks - 06-13 BMW 3 Series/1 Series (E9X/E8X) (M Ver...

T#:33913475

Part#: SPL FE E9M

In Stock

$ 449.00

This product was last offered at the strikethrough price on
06-18-2026

$ 224.99 USD

Add to Wish List

Qty

$ 224.99 USD

Add to Wish List

Front Upper Strut/Shock Mount - Left or Right - E9X M3

T#:11988

Part#: 31302283650

In Stock

11% off MSRP $ 336.46

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 300.99 USD

Add to Wish List

Qty

11% off MSRP

$ 336.46

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 300.99 USD

Add to Wish List

On the 2008-up E9X M3 the front strut is held in place by this mount or 'guide support'. The mount not only locates the strut to the body of the car, it also contains bearings that allow the strut to move with the steering and travel of the suspension. It's rubber isolated to minimize vibrations and annoying road impacts from reaching the driver.

The problem that we have seen is that the rubber will wear out over time, and will no longer dampen the vibrations and harshness when contacting a bump or pothole. The driver will often feel that the car does not steer as accurately and the ride is harsher. The bearings inside can also wear out, especially when dirt and sand get into the grease. Replacement will keep the steering sharp, and noise, vibration, and harshness from spreading through the chassis. It's also a good idea to replace these any time a new strut or coil over kit is going on the car.

Price is per mount. Left and Right are the same.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2012 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Genuine BMW Front Upper Spring Perch - 31336764093

T#:7762

Part#: 31336764093

In Stock

5% off MSRP $ 39.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

Qty

5% off MSRP

$ 39.80

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

OE replacement spring perch. *This spring perch also fits OEM E30 front strut housings to allow a drop of approximately 12mm over stock ride height. This perch works with stock-style lowering springs only.

Show More Show Less

Genuine BMW Eccentric Bolt - 33326764292

T#:21814

Part#: 33326764292

In Stock

$ 25.49 USD

Add to Wish List

Qty

$ 25.49 USD

Add to Wish List

Genuine BMW Eccentric Bolt - M12X1,5X125
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

Genuine BMW Rear bump stop - E90 E92 E93 M3 S65

T#:61104

Part#: 33532283445

Ships in 1-2 days

4% off MSRP $ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

4% off MSRP

$ 44.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Additional Shock Absorber, Rear -
This item fits the following BMW Chassis:
E90,E92,E93

Genuine BMW Front Bump Stop - E90 E92 E93 M3 S65

T#:54441

Part#: 31302283444

In Stock

5% off MSRP $ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Qty

5% off MSRP

$ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.99 USD

Add to Wish List

Genuine BMW Additional Shock Absorber, Front -
This item fits the following BMW Chassis:
E90,E92,E93

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

Back Ordered

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Eccentric Camber Bolt - Priced Each

T#:638165

Part#: 07146888626

In Stock

$ 22.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 22.93 USD

Add to Wish List

Qty

$ 22.93 USD

Add to Wish List

Used to adjust front camber - One required per side

E9X M3 Front Control Arm Upgrade Kit w/ Installation Hardware ...

10X Entries Into Our F80 M3 Sweepstakes

T#:30430683

Part#: 37142283867EKT2

In Stock

Sale - Save 14% $ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Qty

Sale - Save 14%

$ 491.99

This product was last offered at the strikethrough price on
04-28-2026

$ 422.75 USD

Add to Wish List

Enhance your BMW's performance with our premium control arm upgrade kit from Turner Motorsport! This kit provides a significant handling upgrade without sacrificing ride quality. Perfect for enthusiasts looking to replace their factory control arms with sturdier, high-performance alternatives, this kit features stiffer bushings and ball joints for improved precision.

Key Benefits:

Improved Handling: Experience more precise and responsive steering, giving your BMW a sportier feel. Increased Durability: Our control arms are much sturdier than factory units, ensuring long-lasting performance. Negative Camber Adjustment: Adds approximately 0.75 degrees of negative camber to the front, enhancing cornering grip and stability. Complete Kit: Includes all four M3-specific lower control arms with mounting hardware. M3 Headlight Leveling Rod: Necessary for proper installation, ensuring your headlights are correctly aligned. Important Note for Z4 Models: For Z4 owners, please be aware that the M3 headlight level sensor rod is positioned differently. A custom solution will be required to attach the sensor rod to the control arm. Currently, we do not offer a direct solution for this issue.

Upgrade your BMW's suspension with confidence! Enjoy a smoother, more controlled ride with our premium control arm upgrade kit!

Show More Show Less

Genuine BMW Rear Bump Stop - E92, E93, E90

T#:61199

Part#: 33536767335

In Stock

10% off MSRP $ 44.26

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD

Add to Wish List

Qty

10% off MSRP

$ 44.26

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 39.95 USD

Add to Wish List

Genuine BMW Additional Shock Absorber, Rear -
This item fits the following BMW Chassis:
E90,E92,E93

Rear Differential Carrier Bushing - Front Position - E82,E90,E92,E93 ...

T#:13479

Part#: 33312284019

Ships in 1-2 days

25% off MSRP $ 100.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

25% off MSRP

$ 100.20

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

BMW M replacement bushing. Great stock replacement for M vehicles or as an upgraded to the non-M bushings.

Macht Schnell EDC Emulation Module

T#:5351

Part#: TMS5351

Ships on Oct 30, 2026

$ 249.99

This product was last offered at the strikethrough price on
05-29-2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

For those wanting to move away from EDC for aftermarket suspension systems or coilover setups, the EDC monitoring can be a bit obtrusive as this type of monitoring is no longer required – resulting in numerous error messages thinking the system has malfunctioned. This EDC Emulation Module installs in less than 15 minutes and will fully emulate a fully active EDC environment when activated. Module can be activated/deactivated by via the integrated mini USB port within the module housing.

The Macht Schnell EDC Emulation Module is possible of the following features:

The ability to run aftermarket racing suspension/coilover setups in which EDC monitoring is not required

Compatible with iDrive and non-iDrive systems

Easy 15-minute installation process with no wire cutting

Proper emulation of the EDC monitoring system

No dealer visits or coding required after installation

Completely removable at any time

Note: The Macht Schnell EDC Emulation Module will disable the EDC monitoring system supplied by BMW. Once disabled the behavior of the car will change and the driver will need to adjust his/her skill and technique. For this reason, this module is not intended for street vehicles and its use may result in injury or even death if proper conditions and procedures are not followed.
Will not work on vehicles equiped with BMW's Dynamic Drive system.

This item fits the following BMWs:
2008-2011 E90 BMW M3 Sedan
2008-2013 E92 BMW M3 Coupe
2008-2013 E93 BMW M3 Convertible
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i
2008+ E71 BMW X6 xDrive35i X6 xDrive50i

Show More Show Less

Rear Shock Mounts (RSM) - Upper - OEM Rubber - E90 M3, E92 M3, E93 M3...

T#:11955

Part#: TMS11955

In Stock

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit cars equipped with the EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33502283519
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33502283518
D. rear upper supporting cup, 33522283439 (sits over bumpstop)
The lower mount on the M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Genuine BMW Rear Upper Shock Mount - Upper Section - E90 E92 E93 M3 S...

For vehicles with EDC

T#:60606

Part#: 33502283519

In Stock

24% off MSRP $ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.50 USD

Add to Wish List

Qty

24% off MSRP

$ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.50 USD

Add to Wish List

Genuine BMW GUIDE SUPPORT, UPPER PART

OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (no...

10X Entries Into Our F80 M3 Sweepstakes

T#:11954

Part#: TMS11954

In Stock

Sale - Save 1% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

Qty

Sale - Save 1%

$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.87 USD

Add to Wish List

A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
The lower mount on the 1M/M3 is integrated on the shock absorber.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

This item fits the following BMWs:
2011-2012 E82 BMW 1M
2008-2011 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

SPL Parts Pro Adjustable Rear Sway Bar End Link Pair - E8X E9X RWD ...

T#:553735

Part#: SPLREE9X

In Stock

$ 224.10 USD

Add to Wish List

Qty

$ 224.10 USD

Add to Wish List

These SPL Parts adjustable rear sway bar end links replace OEM part number 33556764428

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Aftermarket sway bars and aggressive driving exact a punishing toll on your sway bar end links, often causing them to snap or bend. To combat this, pick up these SPL Pro Adjustable end links that are much stronger than stock and are also allow for adjustments to best suit your suspension configuration. These also allow for you to set or eliminate preload quickly. SPL Pro rear end links utilize Teflon lined 1/2" FK bearings that offer the highest load capacity possible.

Technical specifications:

6061 aluminum turnbuckles
left hand and right hand threaded rod ends
Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Submodels
2008-2013 E8X BMW All Submodels

Show More Show Less

Genuine BMW Rear Upper Shock Mount - Lower Section - E90 E92 E93 M3 S...

For vehicles with EDC

T#:60605

Part#: 33502283518

In Stock

22% off MSRP $ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.00 USD

Add to Wish List

Qty

22% off MSRP

$ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.00 USD

Add to Wish List

Genuine BMW GUIDE SUPPORT, LOWER PART

Genuine BMW Sway Bar Link - Front Left - E9x M3, 1m Coupe

T#:22827

Part#: 31352283441

In Stock

14% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Qty

14% off MSRP

$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

This is the genuine BMW front left stabilizer bar link for the E9x M3 with S65 engine and 1m Coupe.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Show More Show Less

Genuine BMW EDC Adapter Lead - E9X M3 S65

T#:19937

Part#: 31312283380

Ships in 3 Business Days

4% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

Qty

4% off MSRP

$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.99 USD

Add to Wish List

This is the sensor lead for EDC-equipped vehicles, which mounts to the top of the strut.

Genuine BMW Sway Bar Link - Front Right - E9x M3, 1m Coupe

T#:13392

Part#: 31352283442

Ships in 1-2 days

14% off MSRP $ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

Qty

14% off MSRP

$ 101.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 87.99 USD

Add to Wish List

This is the genuine BMW front left stabilizer bar link for the E9x M3 with S65 engine and 1m Coupe.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Show More Show Less

Genuine BMW Rear Subframe Bushing Stopper - Rear Position

T#:60140

Part#: 33316794866

Ships in 1-2 days

4% off MSRP $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD

Add to Wish List

Qty

4% off MSRP

$ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 26.99 USD

Add to Wish List

Genuine BMW Stopper, Rear
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F36

Genuine BMW Rear Upper Shock Mount, Upper - 33506771737

For vehicles without EDC

T#:348678

Part#: 33506771737

In Stock

14% off MSRP $ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.59 USD

Add to Wish List

Qty

14% off MSRP

$ 33.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 28.59 USD

Add to Wish List

When replacing your shocks, it is always best to replace the shock mounts. This helps prevent excessive road noise and vibrations from the suspension and keeps anything from knocking or rattling. This is the top of the mount that threads onto the shock.

For vehicles without EDC

Show More Show Less

Genuine BMW Hex Bolt With Washer - 33176760336

T#:59645

Part#: 33176760336

In Stock

7% off MSRP $ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Qty

7% off MSRP

$ 25.16

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.49 USD

Add to Wish List

Genuine BMW HEX BOLT WITH WASHER

BMW E9X M3 Carbon Fiber Strut Tower Brace

Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes

T#:389081

Part#: D180-0011

Ships in 5 Business Days

Sale - Save 10% $ 531.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 478.76 USD

Add to Wish List

Qty

Sale - Save 10%

$ 531.99

This product was last offered at the strikethrough price on
09-28-2026

$ 478.76 USD

Add to Wish List

Preserves chassis integrity & improves handling - a high-end accessory for the discerning enthusiast

OEM TRW Front Upper Control Arm - Right - E82 1M, E9X M3

10X Entries Into Our F80 M3 Sweepstakes

T#:338043

Part#: 31102283576

In Stock

Starting at $ 88.99 USD

Add to Wish List

Starting at $ 88.99 USD

Add to Wish List

This right/passenger's front upper control arm - also know as a tension strut or thrust arm. This is the control arm with the outer ball joint pointing down. This is the OE BMW replacement (made by TRW) and fits E82 1M Coupe and E90/E92/E93 M3. This control arm includes the inner pressed in bushing and outer ball joint. A direct replacement from the original manufacturer.

This part can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The inner bushing on the M3 arm is a solid rubber instead of the fluid-filled non-M design. This solid rubber part will last longer and be more responsive thanks to less deflection in the bushing. The M3 arm is a direct replacement for the stock non-M part.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 325xi 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible

Show More Show Less

Genuine BMW Rear Lower Control Arm Balljoint - Outer - E82/E88 E9X F2...

T#:21815

Part#: 33326792553

In Stock

15% off MSRP $ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Qty

15% off MSRP

$ 95.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 81.99 USD

Add to Wish List

Genuine BMW Ball Joint
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93,F22,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i12

Genuine BMW Rear Upper Shock Mount, Bottom - 33506771738

For vehicles without EDC

T#:348679

Part#: 33506771738

In Stock

Sale - Save 18% $ 28.47

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.31 USD

Add to Wish List

Qty

Sale - Save 18%

$ 28.47

This product was last offered at the strikethrough price on
05-14-2026

$ 23.31 USD

Add to Wish List

Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.

Show More Show Less

Genuine BMW Support Bearing Repair kit

T#:222082

Part#: 33522406280

Ships in 1-2 days

6% off MSRP $ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Qty

6% off MSRP

$ 62.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 58.99 USD

Add to Wish List

Genuine BMW Repair Kit For Support Beari - 33522406280

Genuine BMW Trailing Arm Bushing - E82 E88 E90 E91 E92 E93

Located at the inner and outer positions of the rear trailing arm

T#:21813

Part#: 33326763092

Ships in 1-2 days

14% off MSRP $ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD

Add to Wish List

Qty

14% off MSRP

$ 57.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 49.99 USD

Add to Wish List

Genuine BMW Rubber Mounting
This item fits the following BMW Chassis:
E82 1M Coupe,E82,E90,E92,E93

SPL Parts Eccentric Lockout Kit for Rear Toe Arms - E8X E9X RWD ...

T#:553804

Part#: SPLELE9X

Ships in 1 Business Day

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

SPL Parts is a performance suspension manufacturer that designs and tests their products all in-house here in the USA. Additionally, all materials used are sourced from American suppliers to ensure consistently high quality products. SPL Parts products are all constructed using chromoly seamless straight tubing, DOM mandrel bent tubing, and 6061 and 2024 aluminum for high strength and quality. All TIG welding and CNC machining is also done locally by professional welders and machine shops to meet exact quality standards and tolerance specifications. For anything from racing to street driven needs, SPL Parts offer an amazing line of premium quality products that are perfect to get your car back in spec.

Factory BMW eccentric bolts only allow for small toe adjustments and often slip under hard cornering, effectively changing your alignment. SPL eccentric lockout kits eliminate stock eccentric bolts - you must have adjustable rear toe arms to utilize this kit in your setup;

Technical Specifications:

CNC machined from 6061 aluminum
CAD plated grade 10.9 hardware
Include washers and bolts for both sides of your vehicle.
Made in the USA!

Fits the following BMWs:
2006-2013 E9X BMW RWD Sub-Models
2008-2013 E82 BMW All Submodels

Show More Show Less

Rear Upper Shock Mount Kit - E9x

For vehicles without EDC

T#:341092

Part#: E9X331263

In Stock

$ 137.42 USD

Add to Wish List

Qty

$ 137.42 USD

Add to Wish List

SPL Eccentric Lockout Kit - E9X M3

T#:17804826

Part#: SPLELE9M

Ships in 1 Business Day

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

The stock eccentric bolts provided by BMW for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout Arm (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber/toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. One kit includes washers and bolts for both camber arms. Sold as a complete kit for one car. Made in the USA. Application List: 2006 - 2011 E8X M-Series 2006 – 2011 E9X M-Series

Show More Show Less

Genuine BMW Front Sway Bar Bushing Bracket - E82 1 M Coupe E90 E92 E9...

T#:15526

Part#: 31352283037

In Stock

5% off MSRP $ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

5% off MSRP

$ 42.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

GENUINE BMW STABILIZER SUPPORT

Genuine BMW Differential Carrier Bushing - Rear Position - E90 E92 E9...

T#:60061

Part#: 33312283384

Ships in 1-2 days

2% off MSRP $ 106.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.99 USD

Add to Wish List

Qty

2% off MSRP

$ 106.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 104.99 USD

Add to Wish List

This is the rear differential carrier bushing located in the rear subframe.

3-series Strut/Shock (EDC) Mount Kit - E90 M3, E92 M3, E93 M3 ...

T#:11952

Part#: E9XM3EDCMOUNTKIT

In Stock

$ 742.99 USD

Add to Wish List

Qty

$ 742.99 USD

Add to Wish List

Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

This package is for cars WITH the EDC suspension.

Included in the E9X M3 Mount Kit:

front upper strut mounts with bearings (also known as a guide support), 31302283650

A. rear upper-top shock mounts, 33502283519

B. rear upper-middle shock mounts, 33506767010

C. rear upper-bottom shock mounts, 33502283518

D. rear upper supporting cup, 33522283439 (sits over bumpstop)
Buy as a package and save $!!

This item fits the following BMWs equipped with EDC suspension
2008-2012 E90 BMW M3 - Sedan
2008-2012 E92 BMW M3 - Coupe
2008-2012 E93 BMW M3 - Convertible

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW E90 M3 S65 4.0L

Sub-Categories

Experience the Superior Performance of Swift Springs

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results