BMW Engine Parts for BMW E90 M3 S65 4.0L

E9X M3 Performance Underdrive Pulley Kit

For vehicles with a production date from 05/2008+ & a counterclockwise rotating Power S...

T#:593749

Part#: 10.00.011

Ships in 4 Business Days

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Free additional power to your M3’s rear wheels without sacrificing or compromising your BMW’s reliability. Machined from 6061-T6 aerospace aluminum, Macht Schnell Performance Underdrive Pulleys are strong as well as lightweight to limit parasitic drag from the accessories within a moderate level for maximum performance on or off the track. After machining and engraving, pulleys are then T3 hard anodized for additional strength, anti-corrosion & wear resistance. Our DualDrive design replaces the Crank Accessory & Power Steering Pulleys, resulting in an additional 9-14 HP and 7-9ft. lbs TQ gain for the M3. Gains are due to a reduction in power required to turn accessories; an increase in accessories lifespan due to lower speed will also result. All factory harmonics/balancing are undisturbed. Macht Schnell Performance Underdrive Pulleys have no negative effect on accessory operation and comes fully equipped with new belts. Already have this kit and need new belts? See T#14491 and T#14489 Performance Underdrive Pulleys Features: DualDrive design allows maximum performance, with minor effect on accessory speed Proper cooling temperatures are retained at proper levels on or off the track Maintains proper alternator speed, allowing sustained levels to sensitive control modules Machined from 6061-T6 aerospace aluminum T3 Hard-Anodized for maximum strength and corrosion/wear resistance No affects to crankshaft dampening or harmonics Simple bolt-on installation

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

T#:553839

Part#: PP.S65.V8.B

Ships in 6 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

VF Engineering Supercharger Kit - 595hp & 385 ft-Lbs Torque - E9X M3 ...

T#:378755

Part#: VFK91-02

Ships on Oct 27, 2026

13% off MSRP $ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

Qty

13% off MSRP

$ 7,995.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 6,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

Show More Show Less

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

For vehicles with a production date up to 05/2008 with single drive belt.

T#:553840

Part#: PP.S65.V8.A

Ships in 8 Business Days

$ 295.00 USD

Add to Wish List

Qty

$ 295.00 USD

Add to Wish List

Rogue Engineering has developed a power pulley kit that reduces the drag on specific pulleys while allowing others to remain at their same efficiency. This allows for perfect operation in daily driven vehicles without a hiccup or stutter. However, when the demand for power is requested, the power pulley kit allows for the freed power to become apparent. The term "power" pulley is a bit of a misnomer. Underdrive pulleys actually free up power by reducing the drag caused by the accessories. These pulleys are based off a calculated percentage from factory dimensions, so that particular component speeds are safely reduced without affecting their true purpose.

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

T#:2474

Part#: TMS2474

Ships on Jan 29, 2027

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

T#:2500

Part#: TMS2500

Ships on Jan 29, 2027

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

VF Engineering Oil Cooler With Oil Lines - E9X M3

T#:378330

Part#: VFAOC-E9MKT

Back Ordered

$ 1,692.99 USD

Add to Wish List

Qty

$ 1,692.99 USD

Add to Wish List

This oil cooler from VF Engineering is the perfect BMW oil cool for your M3. Produced by CSF for VF engineering, this cooler contains desely packed bars and plates for the greatest possible surface area for heat exchange. This oil cooler offers many benefits over stock, including 2 extra rows of even better cooling. In addition, this cooler is compatible with all modifications that the stock cooler is applicable such as a supercharger system.

Show More Show Less

VF Engineering Supercharger Kit - 625hp & 400ft-Lbs - E9X M3 S65 ...

T#:597656

Part#: VFK92-01

Ships on Oct 27, 2026

$ 8,995.00 USD

Add to Wish List

Qty

$ 8,995.00 USD

Add to Wish List

BMW Supercharger Kits can be found all over the internet, but who should you choose to go with? If you want to go to with a forced induction system and want reliability and a driving feel that isn't adversely affected, the VF Engineering Supercharger Kit is one of the best options on the market. Included with every supercharger system is their custom proprietary VF.GIAC software that safely realigns all fueling and engine management parameters for optimal performance and long term drivability. Unlike many other options that are available, the VF Supercharger kit is designed to work with BMW's OEM parameters to minimize the likelihood of DTCs (Diagnostic Trouble Codes) and Check Engine Lights.

Show More Show Less

VF Engineering VF650 Supercharger Kit - E9X M3 S65 4.0L

T#:18733517

Part#: VFK93-01

Ships on Oct 27, 2026

$ 9,995.00 USD

Add to Wish List

Qty

$ 9,995.00 USD

Add to Wish List

The VF-Engineering M3 supercharger for the BMW E90/92/93 S65 engine is a fully upgrade-able water cooled supercharger system. Designed to provide the most consistent charge temperatures under aggressive driving, the VF water intercooler system has a greater propensity to dissipate heat energy out of the air charge than an air intercooler. VF650 Specifications: 650hp | 420tq 7.5-8.0psi Vortech V3-Si Trim Air to water charge cooler *Requires 93oct or higher *Motorsport Exhaust

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW E90 M3 S65 4.0L

Sub-Categories

E9X M3 Performance Underdrive Pulley Kit

Rogue Engineering Power Pulley Set - E9X M3 (05/2008+)

VF Engineering Supercharger Kit - 595hp & 385 ft-Lbs Torque - E9X M3 ...

Rogue Engineering Power Pulley Set - E9X M3 (up to 05/2008)

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

VF Engineering Oil Cooler With Oil Lines - E9X M3

VF Engineering Supercharger Kit - 625hp & 400ft-Lbs - E9X M3 S65 ...

VF Engineering VF650 Supercharger Kit - E9X M3 S65 4.0L

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results