BMW Exterior Trim, Body Parts, Aero and Styling for BMW 3 Series E90 (2006-2011)

Having a skid plate/splash guard has more purpose than you would believe. The skid plate is used to not only protect your underbody from rogue debris damaging the oil pan, but the other great benefit is protecting your drive belts and pulleys! When you open your hood and look down in front of your engine you see a series of drive belts and most likely you can see straight to the ground where there was originally a splash guard. When driving you are exposing your drive belts to the water, dirt and debris on the road which can lead to premature failure drive belts and accessories (Or even worse, the dreaded belt squeak.)

The E90/E92 plastic belly pan is a constant point of impact for potholes, speedbumps, inclines, and road debris(we saved one of our customers already, just take a look at the pictures). By now your factory belly pan is either falling off, broken into pieces or missing all together. Our skid plate for the E9x chassis is designed to replace the factory plastic splash shield. Instead of replacing your belly pan with another plastic one, upgrade to a full 8 gauge aluminum skid plate for your last belly pan purchase! The skid plate is designed with slotted mounting locations for ease of install and retains the factory jack-point on the subframe.

Our Aluminum Skid Plate is the ultimate upgrade in security for your E9X! This skid plate is a direct replacement for the OE belly pan, with the added benefit of durability from its heavy duty aluminum construction there is no question you should have one on your vehicle. Keep your engine bay clean, your drive belts functioning properly and your engine safe from hazards on the road.

Features:

Designed to protect and preserve the underside of the vehicle from any potential road debris
Replaces torn/tired plastic OEM shield
Rugged 8GA 5052 Aluminum construction
Slotted mounting locations for ease of install
160mm diameter cutaway used to retain the use of the OEM subframe jack point
Includes factory BMW hardware for installation
Designed and manufactured in the USA

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs: 
2008-2011 E90 BMW M3 - Sedan 
2008-2013 E92 BMW M3 - Coupe 
2008-2013 E93 BMW M3 - Convertible 

• Each Strip: 18" in length
• Package Contains: 5 strips per box
• Easy Installation: Pre-installed with 3M tape for convenience

Aero upgrades are undoubtedly one of the most visually striking enhancements you can make to your vehicle. A carbon fiber front lip, in particular, is a popular choice that instantly elevates the car's appearance, making it stand out from the crowd.

However, this bold aesthetic upgrade has its challenges, especially when navigating uneven roads or steep driveways that can potentially damage the expensive carbon fiber. Luckily, Acexxon offers a solution to safeguard your valuable lip from scratches and more serious damage, allowing you to fully enjoy the upgrade without worries.

The Acexxon kit comprises five 18-inch strips that securely attach to the underside of your lip using pre-installed 3M double-sided tape. Three of these strips feature a smooth end, seamlessly blending with the front lip's leading edge. The remaining two strips are designed with contour flex sections, ensuring a precise fit around the lip's curved contours. Compared to other kits, Acexxon's design minimizes trimming requirements, needing only the trimming of excess material at the lip's ends for a flawless finish.

Key Features:

Includes 5 strips Each strip measures 18" in length and 1.75" in width Thickness of 5.47mm Equipped with pre-installed 3M tape for easy installation

We developed our painted reflectors to seamlessly eliminate the OEM orange front bumper reflectors, matching BMW paint codes and fitment.

Install should take no longer than 20 minutes for both sides, cleaning up the front end of your car instantly. Includes a pair of painted reflectors.

This product fits the following BMWs:
E90/E92/E93 M3 

Looking to add style to your M3? These carbon fiber Fender Side Grills replace the stock chrome or black gloss trim that connects to the inner grill component. This is a great addition to existing carbon fiber component such as a rear spoiler or front lip. This also looks great as a simple add-on all by itself if you want to keep a clean but sporty look!

Fitment:
2008-2013 E9X BMW M3