Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2009 BMW E90 All non M submodels

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2009-2013 BMW E90 All non M submodels

Is the rear end of your E90 boring you? Install a carbon fiber rear spoiler to instantly make your rear end more aggressive. Can be painted to match your vehicle or installed as-is. Install can be completed in minutes with double-sided adhesive.

Fits both LCI and Pre-LCI E90s.

This product fits the following BMWs:
2006-2011 E90 325i 325xi 328i 328xi 330i 330xi 335d 335i 335xi M3

Clinched Universal Fender Flares

Crafted from high-quality, impact-resistant ABS plastic, Clinched manufactures universal fender flares suitable for various makes and models, including BMWs. These flares, akin to OE bumpers, offer exceptional strength combined with lightweight properties. Universally designed, they require minimal customization for installation. You have the option to seamlessly blend them with your car's body or leave them with exposed rivets and edges for a distinct look. Please note, installation involves drilling and cutting the original fenders. Using a heat gun (or hair dryer) aids in molding the flares to conform to your vehicle's factory body lines, thanks to their high pliability, setting them apart from fiberglass alternatives.

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2007-2013 BMW E90 M3

Redirect airflow away from the wheel wells and even create a bit of additional downforce with these premium aluminum canards from Aeroflow Dynamics!

Features and Specifications:

• Made from High Quality Aluminium
• Made in the USA
• Comes fully CNC'd and professionally powder coated gloss black.
• Fitment Guaranteed
• Hardware are included
• Comes in pairs ( left & right) 
• Professional install highly recommended

Clinched Fender Flares

Clinched specializes in crafting fender flares using high-quality, impact-resistant ABS plastic, akin to the material used in OE bumpers. These flares exhibit:

• Sturdiness and lightweight design
• Universality for installation on various vehicle makes and models
• Options for blending with the car's body or showcasing exposed rivets and edges

The installation of Clinched Flares necessitates the drilling and cutting of original fenders. By using a heat gun or hairdryer, the flares can be shaped to fit seamlessly along the factory body lines, highlighting their exceptional pliability compared to fiberglass alternatives.

Transform your BMW's appearance and durability with Clinched Fender Flares, expertly crafted from premium-grade, impact-resistant ABS plastic. Engineered to match the material of OE bumpers, these flares offer superior strength while remaining lightweight. Designed to fit a wide range of makes and models, they can be seamlessly integrated into your car's body or left to showcase rivets and edges for added flair. Installation involves drilling and cutting your original fenders, with rivets and bolts ensuring a secure attachment. Use a heat gun or hair dryer to mold the flares to your vehicle's contours, taking advantage of their exceptional pliability for a perfect fit.

• High-quality, impact-resistant ABS plastic construction
• Lightweight yet exceptionally strong
• Universal design for versatile compatibility
• Option for blending with car body or showcasing rivets and edges
• Secure installation with rivets and bolts
• Easily molded to follow factory body lines

Clinched Fender Flares: Versatile and Impact-Resistant

Revamp your vehicle's appearance with Clinched Fender Flares, expertly crafted from high-quality, impact-resistant ABS plastic, ensuring strength and lightweight construction similar to OE bumpers. Designed for versatility, these universal flares offer compatibility with various makes and models, allowing easy installation with minor adjustments. Customize your vehicle's look by blending the flares seamlessly with the car's body or leaving them with exposed rivets and edges.

Clinched Flares are installed using rivets and bolts, requiring drilling and cutting of the original fenders for installation. Heat the flares with a heat gun or hair dryer to mold them precisely along the factory body lines. These flares stand out due to their high pliability, distinguishing them from fiberglass alternatives.

Upgrade the appearance and durability of your BMW with Clinched Universal Fender Flares. Crafted from high-quality, impact-resistant ABS plastic, these fender flares offer strength and lightweight performance. They are designed to be versatile, suitable for installation on various makes and models with minimal customization. Whether blended with the car body or left with exposed rivets and edges, Clinched Flares provide a distinctive look.

• Made from high-quality ABS plastic for durability
• Universal design for versatile installation
• Can be blended with the car body or left with exposed rivets and edges
• Includes Type 3 hardware kit for installation
• Alternate hardware available for fine-tuning fitment

Failed window regulators can be a major pain, leaving your window stuck open or closed, or even causing the window to fall down into the door. Unfortunately, genuine window regulators can cost an arm and a leg and many other alternatives are built with questionable quality. Put your worries to rest and replace your failed regulator with a brand new regulator from URO Premium for long regulator life and fantastic quality.

Fits the following BMWs:
2006-2012 E90/91 BMW All models