A performance clutch kit will allow you to drive harder under increased power levels while making sure there is nothing lost to the drivetrain. If you track your vehicle or have raised the maximum horsepower through tuning or modification, chances are you will see increased benefit by installing a high performance aftermarket clutch.
Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MSC Twin Ceramic Disc Clutch Kit is designed to hold 100% to 200% torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 240mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for 100-200% increased torque over stock **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
The SPEC Stage 4 Clutch Kit With Billet Single Mass Flywheel is the ultimate upgrade for BMW enthusiasts demanding race-spec performance and bulletproof strength in the most demanding driving conditions.
Show More Show Less
The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The XClutch 8" solid race clutch consists of a performance flywheel, solid-centered ceramic clutch discs, aluminum cover assembly, release bearing & carrier or internal hydraulic release bearing (HRB). XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 7/8" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease Pilot Bearing With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
Working in collaboration with Competition Clutch, the up-and-coming German automotive performance company DKM has released a new line of high-quality clutches made to satisfy your stock and modified performance needs! If you're having problems keeping power to the wheels, DKM has the solution. Their design, using high-grade materials, gives you increased strength and heat tolerance preventing wear and fade, ensuring increased torque capacity, quicker shifts, and longer clutch life. Tracking your vehicle is all fun and games until your start burning through clutches as fast as you can afford to replace them. To end this cycle, the MRX Twin Ceramic Disc Clutch Kit is designed to hold up to 650 ft/lbs torque capacity and provide you with a much-improved clutch engagement! The two ceramic disc setup provides additional contact surface areas to more evenly distribute pressure and heat for both a boost in performance and wear prevention. Kit Contents: Pressure Plate Two Ceramic 215mm Discs Steel Single-Mass Flywheel Pilot Bearing/Bushing and Throw-out Bearing (when applicable) Alignment Tool Rated for upwards of 650 ft/lbs of torque **Due to the nature of lightened single mass flywheels added "NVH" or "chatter" will or may occur during operation. Accompanying modifications can also increase or decrease the amount of "NVH" or "chatter" in the drivetrain. Please contact our sales team with any questions.**
Show More Show Less
For BMW drivers pushing the limits of performance, the ClutchMasters 6 Puck Complete Clutch Kit w/ Aluminum Flywheel – FX400 Stage 4 from Turner Motorsport is the uncompromising solution for race-grade drivability and torque control.
Show More Show Less
The SPEC Clutch Kit With Billet Single Mass Flywheel Stage 5 is built for serious BMW performance builders who need the toughest clutch system available—track-tested and competition-ready.
The XClutch 9 inch kit is one of XClutch's most adaptable kits for performance upgrades and conversions. The twin disc 9" with ceramic friction discs are designed for high horsepower motorsport applications where a high heat and torque capacity is required. XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 9 1/16" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.150 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Performance Street Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less
The XClutch 8" solid race clutch consists of a performance flywheel, solid-centered ceramic clutch discs, aluminium cover assembly, release bearing & carrier or internal hydraulic release bearing (HRB). XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. Utilizing the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between drivability and performance for different vehicle applications. The pivot point and diaphragm design are carefully analyzed to ensure positive pedal feel and increased clamping force. Specifications Clutch Disc Diameter - 7 7/8" Clutch Disc Spline - 26 Disc Material - Ceramic Disc Type - Solid Input Shaft Diameter - 1 3/8" Friction Surface Configuration - Raised Flywheel Step - +0.087 Assembly Weight Maximum Torque Capacity - 890 Recommended Use - Track Use Includes Single Mass Flywheel 2 Solid Ceramic Clutch Discs Pressure Plate Assembly Flywheel Bolts Pressure Plate Bolts Release Bearing Clutch Spline Grease With one of the world's most advanced clutch testing and R&D facilities, in-house vehicle testing and over 30 years of clutch experience, XClutch performance upgrades offer the highest levels of engineering and product development for your street vehicle, 4x4 or dedicated race car.
Show More Show Less