Valve Cover for BMW 3 Series E90 (2006-2011)

N54 Valve Cover Upgrade Kit - BMW N54 3.0L

T#:25772568

Part#: 11127565284MTKT

In Stock

Sale - Save 23% $ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

Qty

Sale - Save 23%

$ 547.99

This product was last offered at the strikethrough price on
05-03-2026

$ 419.23 USD

Add to Wish List

The stock plastic valve cover from BMW tends to warp and crack over time due to numerous heat cycles. This leads to oil and vacuum leaks that both make a mess and negatively affect performance and reliability. Replace your stock valve cover with this aluminum upgrade from Bremmen Parts to eliminate these issues! The aluminum construction results in a significantly stronger valve cover that won't warp or crack. This kit contains everything you need to upgrade your cover, including the upgraded aluminum valve cover, valve cover gasket, oil cap, and hardware. Additionally, we've also included a new PCV blow-by hose and a Vargas PCV upgrade for additional reliability! This is especially important for tuned vehicles with upgraded turbos.

Show More Show Less

M57 Diesel Valve Cover Gasket Replacement Kit - BMW E70 E90 M57 3.0L ...

T#:20946753

Part#: 11122247447TMSKT

In Stock

Sale - Save 2% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Qty

Sale - Save 2%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Eliminate your valve cover oil leaks! This M57 Valve Cover Gasket Replacement Kit includes all of the basic gaskets and seals necessary to replace your valve cover gasket and prevent further oil leaks. Included: Valve Cover Gaskets & Hardware Fuel Injector O-Rings (x6) Fuel Injector Gaskets (x6) Turbo Oil Line Seals (x6)

Show More Show Less

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

For vehicles with a production date from 10/2006

T#:180875

Part#: TMS180875

In Stock

$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD

Add to Wish List

Qty

$ 107.33 USD

Add to Wish List

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

11127582245 - N52 valve cover gasket set
11127552280 - N52 eccentric shaft sensor seal
11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Valve Cover Kit - N55

T#:5376284

Part#: 11127570292TKT

In Stock

Sale - Save 5% $ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

Qty

Sale - Save 5%

$ 320.99

This product was last offered at the strikethrough price on
05-03-2026

$ 304.52 USD

Add to Wish List

If your valve cover has become cracked or warped, replace it with this Hamburg Tech cover from Turner Motorsport to prevent leaks and further valvetrain damage. Replace your leaking valve cover to keep your oil inside the engine, where it belongs. Includes everything needed to install a new valve cover: Valve cover Gasket flange Crank case vent hose Hardware

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

T#:21735875

Part#: VALVECVRN52KT

In Stock

Sale - Save 12% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 411.03 USD

Add to Wish List

Qty

Sale - Save 12%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 411.03 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

N54 Valve Cover upgrade kit

T#:6196925

Part#: 11127565284TKT

In Stock

Sale - Save 31% $ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 292.75 USD

Add to Wish List

Qty

Sale - Save 31%

$ 423.99

This product was last offered at the strikethrough price on
05-03-2026

$ 292.75 USD

Add to Wish List

You want to keep your N54 running properly to enjoy the drive and justify the costs associated with owning an N54 car! This kit has a replacement valve cover for your current cover that is worn or damaged. Along with replacing the valve cover this kit includes an upgraded pcv valve. This upgraded PCV valve uses machined metal components in place of the stock plastic parts, resulting in a more durable part. While replacing your valve cover a common failure is one of the blow by pcv vent hose cracks and is also INCLUDED in the kit for a full proof valve cover upgrade service! Replace and upgrade your valve cover at the same time, with the VTT PCV valve for longer PCV life and better flow.

Show More Show Less

VTT Modular Cast Aluminum CNC Valve Cover Kit

T#:586044

Part#: VTTN54CASTVC-1-1

Ships in 10 Business Days

$ 759.99 USD

Add to Wish List

Qty

$ 759.99 USD

Add to Wish List

Complete Valve Cover Gasket Kit - BMW S65 4.0L

T#:28869570

Part#: 11127838271TKT

Ships in 7 Business Days

$ 324.99

This product was last offered at the strikethrough price on
03-04-2026

$ 321.99 USD

Add to Wish List

Qty

$ 321.99 USD

Add to Wish List

If your valve cover is leaking oil or a bad seal is causing vacuum issues and check engine lights, we recommend replacing your seals with this complete valve cover gasket kit! This kit includes all of the main gaskets and o-ring seals used by BMW to seal your valve cover to the cylinder head. Included: Victor Reinz Left & Right Valve Cover Gaskets Genuine BMW Oil Separator Seal O-rings - Two Per Valve Cover Genuine BMW Crankshaft Position Sensor O-Rings - Two Per Valve Cover URO Spark Plug Tubes w/ Gaskets If you are not replacing your valve cover, we also recommend inspecting the grommets found on the valve cover bolts. Over time these can compress or split, leading to insufficient sealing of the valve cover to the cylinder head due to a lack of pressure. BMW does not offer these grommets separately from their individual valve cover bolts, but NRW Design came in clutch with their Silicone Valve Cover Grommet Kit.

Show More Show Less

Billet N54 Valve Cover - N54

T#:557949

Part#: VTTVCOVBCR

Ships in 10 Business Days

Starting at $ 1,448.99 USD

Add to Wish List

Starting at $ 1,448.99 USD

Add to Wish List

The N54 valve cover, while not a terrible design, has it's share of flaws. Most owners have had to replace this part over time as it can crack for seemingly no reason. Additionally, the stock valve cover has its limitations for vacuum and PCV connectivity.

VTT is proud to offer a ground-up system designed to give the end user complete control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? Now you can run them any way you want! Including complete VTA, oil cap one-way breather, or whatever else you may need. This i a true solution that solves many plumbing headaches.

Accessability options aside, this part looks magnificent. CNC Machined and anodized in your choice or Red, Black, or Clear, this valve cover is sure to turn heads!

Details:

100% CNC 6061-T6 Aircraft aluminum construction
Anodized in a variety of colors
Custom logo available on the cap
Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
Gives the end user true variety for setting up their Valve Cover and PCV System

This part fits the following BMW engines:
2006-2013 N54

Show More Show Less

Vargas Billet Valve Cover And Dual Catch Can Combo Kit - Billet Black...

T#:22394048

Part#: VTTN54VCOCCBLK

Ships in 10 Business Days

$ 2,129.99 USD

Add to Wish List

Qty

$ 2,129.99 USD

Add to Wish List

This convenient kit from Vargas includes everything you need, saving you the hassle of sourcing specific fittings for your valve cover-catch can setup. Spend less time searching and more time enjoying your upgraded system!

Show More Show Less

EWG BILLET CNC Valve Cover - Red

T#:41695014

Part#: VTTS55BILLETVCRE

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.

Show More Show Less

Vargas Billet Valve Cover & Catch Can Kit - Gold - BMW N54 Engine ...

T#:52129721

Part#: VTTVCOCCCOMBG

Ships in 10 Business Days

$ 1,859.99 USD

Add to Wish List

Qty

$ 1,859.99 USD

Add to Wish List

Upgrade your engine’s reliability and ventilation with the VTT "All You Need" Kit, featuring the only gold valve cover currently on the market for the N54.

M57 Comprehensive Valve Cover Gasket Replacement Kit - BMW E90 E70 M5...

T#:51883703

Part#: 11122247447CKT

In Stock at Vendor

Sale - Save 1% $ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD

Add to Wish List

Qty

Sale - Save 1%

$ 515.64

This product was last offered at the strikethrough price on
05-03-2026

$ 508.80 USD

Add to Wish List

As with many other BMW valve covers, replacing the M57 valve cover gasket requires numerous other parts to be removed before this gasket can be accessed. As you remove these parts, you expose other gaskets and components that can and should be replaced. This kit includes all of the gaskets, hardware, and a few other components we highly suggest replacing while completing the valve cover gasket replacement to prevent leaks and ensure your M57 continues running smoothly.

Show More Show Less

VTT S65 Billet Valve Cover Set

T#:20749241

Part#: S65BVC

Back Ordered

Starting at $ 1,698.99 USD

Add to Wish List

Starting at $ 1,698.99 USD

Add to Wish List

VTT is proud to announce the S65 Billet Valve cover set. VTT created these for the S65 owner who wants to add a great look to their engine bay while also getting rid of the stock valve cover which are very problematic and can crack/leak/delaminate with higher mileage. Eliminating the leak-prone factory oil cap design with a threaded cap with O-ring Seal, VTT has also added two -10 ORB bungs which allow you complete freedom to plumb in a catch can, or vent system of your choice. The internal baffling is 100% in place to knock down any oil from the vapors before being expelled. Factory PCV has also been kept in place so these can be run in essentially any configuration required. 100% CNC 6061-T6 Aircraft aluminum construction Anodized in a variety of colors Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover – only 1.8 lbs difference) TWO shrouded -10 ORB ports which Give the end-user variety for setting up their Valve Cover and PCV System Only Billet option on the market with a threaded oil cap, and PCV choices Works with our 1' one-way breather for ultimate crankcase venting Kit includes: Two Billet Valve covers Two US-sourced Viton Gaskets

Show More Show Less

VTT Valve Cover Gasket - BMW N54 w/ VTT VC

For vehicles with VTT Valve Cover

T#:52129724

Part#: VTT-VC-GASKET-N5

Back Ordered

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT N55/S55 replacement gasket is a high-performance sealing solution for the N55 and S55 (EWG) aluminum valve covers.

Project Cars

SELECT YOUR BMW

Valve Cover for BMW 3 Series E90 (2006-2011)

Sub-Categories

N54 Valve Cover Upgrade Kit - BMW N54 3.0L

M57 Diesel Valve Cover Gasket Replacement Kit - BMW E70 E90 M57 3.0L ...

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

Valve Cover Kit - N55

BMW N52 Valve Cover & PCV Valve Refresh Kit

N54 Valve Cover upgrade kit

VTT Modular Cast Aluminum CNC Valve Cover Kit

Complete Valve Cover Gasket Kit - BMW S65 4.0L

Billet N54 Valve Cover - N54

Vargas Billet Valve Cover And Dual Catch Can Combo Kit - Billet Black...

EWG BILLET CNC Valve Cover - Red

Vargas Billet Valve Cover & Catch Can Kit - Gold - BMW N54 Engine ...

M57 Comprehensive Valve Cover Gasket Replacement Kit - BMW E90 E70 M5...

VTT S65 Billet Valve Cover Set

VTT Valve Cover Gasket - BMW N54 w/ VTT VC

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results