BMW Suspension Parts for BMW 3 Series E90 (2006-2011)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:15403
Part#: 31312284097
Ships in 7 Business Days
9% off MSRP $ 1,337.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,218.99 USD
Free Shipping on orders $49 and up
9% off MSRP
$ 1,337.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,218.99 USD
Free Shipping on orders $49 and up
Replace your blown front strut with a Genuine BMW strut for guaranteed high quality and reliability.
Koni - Corporate Logo
T#:369793
Part#: 82401236SPORT
Ships in 5 Business Days
38% off MSRP $ 371.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping
38% off MSRP
$ 371.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 230.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast.
 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty

This item fits the following BMWs:

2008-2013 E82 BMW 128i 135i 135is
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible

Show More Show Less
Koni - Corporate Logo
T#:377936
Part#: E9XXISPORKT
Back Ordered
$ 1,141.99

This product was last offered at the strikethrough price on
08-13-2026

$ 1,124.99 USD
Free Shipping
$ 1,124.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty

Activate your Koni Rebate!

This item fits the following BMWs:

E9x non-M XI (AWD vehicles only)

Show More Show Less

Front And Rear Suspension Refresh Kit - Level 3
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5389789
Part#: 31102283576TMSKT
Ships on Jan 11, 2027
Sale - Save 2% $ 2,197.99

This product was last offered at the strikethrough price on
08-30-2026

$ 2,145.97 USD
Sale - Save 2%
$ 2,197.99

This product was last offered at the strikethrough price on
08-30-2026

$ 2,145.97 USD
Total front and rear suspension rebuild kit utilizing M3 front and rear control arms with bushings and subframe bushings - with high quality aftermarket components. From Turner Motorsport comes the ultimate suspension refresh/upgrade kit, the level 3. This kit contains everything needed to not only fully overhaul your suspension, but also offer a stellar upgrade that will be immediately noticeable. This kit features M3 front and rear control arms with everything needed to convert to them (headlight rod and ABS brackets) that feature pre-installed upgraded bushings, as well as M3 subframe bushings and Meyle HD front and rear end links. Everything you need, from trailing arm bushings to tie rods is included. This kit will remedy loose steering, clunking while hitting bumps, high speed vibration and wandering. You will notice much improved handling, and tighter steering. Power delivery will be much smoother, especially on modified vehicles. If you are overhauling your suspension, do it right the first time with this kit. This refresh/upgrade can be performed by a competent enthusiast in a weekend, assuming the correct tools are available.
Show More Show Less

Genuine BMW - Corporate Logo
T#:15404
Part#: 31312284098
Ships in 7 Business Days
9% off MSRP $ 1,337.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,218.99 USD
Free Shipping
9% off MSRP
$ 1,337.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,218.99 USD
Free Shipping
Replace your blown front strut with a Genuine BMW strut for guaranteed high quality and reliability.
Genuine BMW - Corporate Logo
T#:55005
Part#: 31332283562
Ships in 7 Business Days
6% off MSRP $ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 239.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 224.99 USD
Free Shipping on orders $49 and up
Genuine BMW FRONT COIL SPRING

Genuine BMW - Corporate Logo
T#:47860
Part#: 18207841080
Ships in 4 Business Days
6% off MSRP $ 77.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 77.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 72.99 USD
Free Shipping on orders $49 and up


Genuine BMW Bracket For Rear Silencer, Left -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Koni - Corporate Logo
T#:380891
Part#: 87411535LSPORTKT
Back Ordered
$ 680.99

This product was last offered at the strikethrough price on
08-13-2026

$ 663.99 USD
Free Shipping
$ 663.99 USD
Free Shipping

KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty

Activate your Koni Rebate!

This full kit fits the following BMWs:

E9x non-M XI (AWD vehicles only)

Show More Show Less

Koni - Corporate Logo
T#:361967
Part#: 87411535RSPORT
Back Ordered
$ 349.16

This product was last offered at the strikethrough price on
08-13-2026

$ 331.70 USD
Free Shipping
$ 331.70 USD
Free Shipping

This Koni Sport Front Right strut fits E90 E92 AWD 3 series. KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 
 

  • Big handling improvements
  • Reasonable ride quality
  • Re-buildable for custom vehicle setups
  • Best KONl shock for all lowering springs
  • Lifetime Warranty​

This item fits the following BMWs:
2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe

Show More Show Less

Genuine BMW - Corporate Logo
T#:60121
Part#: 33316783715
Ships in 7 Business Days
6% off MSRP $ 1,899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,783.99 USD
6% off MSRP
$ 1,899.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,783.99 USD


Genuine BMW Rear Axle Carrier -
This item fits the following BMW Chassis:
E90

M3/1M Front And Rear Control Arm Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:28104822
Part#: 37142283867TKT
Ships on Jan 11, 2027
Sale - Save 1% $ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD
Free Shipping on orders $49 and up
Sale - Save 1%
$ 1,054.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,043.71 USD
Free Shipping on orders $49 and up
Featuring quality aftermarket M3 control arms plus Performance Rear Trailing arms Wanting more out of your BMW without having horrid ride quality? This is not only an extremely common handling upgrade, but one of the best upgrades you can do. These control arms are much sturdier than your factory units and feature much stiffer bushings and ball joints. Not only does this kit give you an extremely effective upgrade, it's the perfect excuse to get rid of your factory arms that are at the edge of being road worthy. Not sure about ECS Tuning's Upgraded Trailing arm? Let us explain... Factory steel rear trailing arms flex, causing undesired suspension geometry changes under load. BMW engineered a failure point into this stock arm - metal fatigue combined with shock forces from a pothole or curb, have been shown in some cases to cause the arm to buckle, turning a pleasant drive into a visit by roadside assistance. ECS Tuning's Performance Rear Trailing Arm Set is an upgrade that has been engineered to address these issues, while also being lighter and more attractive than the factory steel component. Elimination of a factory-designed failure point and an all-around stiffer design mean greater peace of mind as well as more confident handling with no unintended geometry changes. Combined with new M3/1M front and rear control arms for the ideal suspension set-up for your car. Kit Features: quality aftermarket M3/1M Front Control Arms quality aftermarket M3/1M Rear Control Arms ECS Upgraded Rear Trailing Arm BMW Headlight Leveling Sensor Rod BMW Rear ABS Bracket quality aftermarket Rear Guide Rods Trailing Arm features: Constructed from solid 6061-T6 aluminum Anodized for corrosion resistance Increased strength versus the factory steel arm - this arm fears no pot holes 25% lighter (384 grams versus 517 grams each)
Show More Show Less
Koni - Corporate Logo
T#:40275148
Part#: 1125 1014
Ships in 5 Business Days
$ 917.99 USD
$ 917.99 USD


Macht Schnell - Corporate Logo
T#:4648688
Part#: 69.10.110
Ships in 8 Business Days
$ 299.00 USD
Free Shipping on orders $49 and up
Macht Schnell's Aluminum Differential Bushing Kit is designed to give your differential carrier more rigidity.
Powerflex - Corporate Logo
T#:376473
Part#: PFR5-412X2
Ships on Sep 23, 2026
$ 122.99 USD
Free Shipping
$ 122.99 USD
Free Shipping

Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

Show More Show Less
OEM Sachs Front Strut Assembly - Right - E90 325xi 330xi, E91 325xi ...
For vehicles with a production date up to 04/2006
Sachs - Corporate Logo
T#:594228
Part#: 31316773256
Ships on Sep 23, 2026
$ 169.61 USD
Free Shipping
$ 169.61 USD
Free Shipping
High-quality OEM replacement strut

Bilstein B8 Performance Shocks & Struts Kit -- E90/E92 M3 - except ED...
Vehicles with EDC require T#344138 for use
10X Entries Into Our F80 M3 Sweepstakes
Bilstein - Corporate Logo
T#:384717
Part#: 24-143318KT
Ships on Jan 18, 2027
$ 908.00 USD
Free Shipping
$ 908.00 USD
Free Shipping

The Bilstein B8 Performance Plus Kit includes two front struts and two rear shocks. These shocks are for use with lowered springs such as from H&R or Eibach. We do not recommend that you use them with any factory spring, including factory sport package springs. With the increased damping rates from stock you will have much more control over body motions. These will give a much more buttoned down and taut feeling with lowering springs compared to stock shocks.


These shocks fit the following BMWs:

2007+ E90 Sedan M3 - not for cars with EDC
2007+ E92 Coupe M3 - not for cars with EDC

Show More Show Less

H&R - Corporate Logo
T#:1484
Part#: 71490
Ships on Sep 29, 2026
10% off MSRP $ 349.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.99 USD
Free Shipping
10% off MSRP
$ 349.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 314.99 USD
Free Shipping
20mm fixed bar (no adjustments); bushings included.

  • Reduces body roll
  • Highest tensile strength available
    H&R Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. Swaybars increase your suspension�s roll stiffness � its resistance to roll in turns � while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. Adding just a rear swaybar to your E9X (i or xi) can make a dramatic improvement in reducing understeer and improving handling balance. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness�giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 330i 335i - Sedan
    2008+ E90 BMW 335d - Sedan
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
  • Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:24344778
    Part#: ECSTMSPDBKT
    In Stock
    Sale - Save 8% $ 1,190.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,096.14 USD
    Free Shipping on orders $49 and up
    Sale - Save 8%
    $ 1,190.99

    This product was last offered at the strikethrough price on
    05-03-2026

    $ 1,096.14 USD
    Free Shipping on orders $49 and up
    Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
    Show More Show Less

    KMAC - Corporate Logo
    T#:389647
    Part#: 192416-2L
    Ships in 8 Business Days
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
    Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

    The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

    Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i
    6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
    2006-2012  E91 BMW  328i - Wagon
    2007-2013  E92 BMW  328i 335i 335is - Coupe
    2007-2013  E93 BMW  328i 335i - Convertible
    1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
    2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
    2004-2011  E63 E64 BMW  645ci 650i
    1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
    2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    2000-2003  E52 BMW  Z8 Roadster (without EDC)
    Show More Show Less
    KMAC - Corporate Logo
    T#:389646
    Part#: 192416-3L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
    Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

    The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

    Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i
    6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
    2006-2012  E91 BMW  328i - Wagon
    2007-2013  E92 BMW  328i 335i 335is - Coupe
    2007-2013  E93 BMW  328i 335i - Convertible
    1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
    2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
    2004-2011  E63 E64 BMW  645ci 650i
    1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
    2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    2000-2003  E52 BMW  Z8 Roadster (without EDC)
    Show More Show Less

    KMAC - Corporate Logo
    T#:389662
    Part#: 193616-3L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Track, Stage 3
    Bearing: PTFE-lined pillow-ball, no bushing

    KMAC Stage 3 camber/caster plates are designed for track or race-only situations where comfort and noise are not the primary concerns. The Stage 3 camber plates use a pillowball bearing, solidly mounted within the camber plate for direct alignment of the strut shaft and no excess play or deflection. Stage 3 are designed to increase negative camber with their patented 'floating' adjustment that changes camber and caster together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Fitment is limited to race-only small diameter coil-over springs (not stock-type). Bearing inserts and adapters included. Detailed instructions included.

    Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    1997-2003  E39 BMW  525i 528i 530i 540i (for cars with EDC)
    1999-2003  E39 BMW  M5
    1995-2001  E38 BMW  740i 740il 750il (for cars with EDC)
    2004-2010  E60 BMW  M5
    2004-2011  E63 BMW  M6
    Show More Show Less

    KMAC - Corporate Logo
    T#:600206
    Part#: 193926-3H
    Special Order: No Guaranteed ETA
    $ 320.00 USD
    Free Shipping
    $ 320.00 USD
    Free Shipping
    Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves
    Show More Show Less
    KMAC - Corporate Logo
    T#:389317
    Part#: 193616-2L
    Special Order: No Guaranteed ETA
    $ 545.00 USD
    Free Shipping
    $ 545.00 USD
    Free Shipping
    Location: Front
    Type: Street/Track, Stage 2
    Bearing: PTFE-lined pillow-ball with thin polyurethane bushing

    The Stage 2 KMAC plates are a mixed street/track camber/caster plate meant to be used in a variety of suspensions. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions. Bearing inserts and adapters included. The Stage 2 camber plates are shorter than a factory mount so may not be suitable for cars will little suspension travel. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Detailed instructions included.

    Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

    This item fits the following BMWs:
    2006-2008  E85 BMW  Z4 M Roadster M Coupe
    Show More Show Less
    Rogue Engineering - Corporate Logo
    T#:553834
    Part#: RE.E9X.TA
    Back Ordered
    $ 339.00 USD
    Free Shipping
    $ 339.00 USD
    Free Shipping

    Updated design!  Now shipping!

    When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

    This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

    Features:

    100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

    Stainless hardware and spacers are perfect for the tough Northeast climate!

    New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

    New!  Included lock-out kit, replaces factory eccentric hardware.

    Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

    Extremely easy installation and adjustment (your alignment shop will LOVE you!)

    Show More Show Less


    Genuine BMW - Corporate Logo
    T#:3094
    Part#: E9X-GPN-RCSIB
    Ships on Oct 8, 2026
    $ 119.98 USD
    Free Shipping
    $ 119.98 USD
    Free Shipping
    BMW Motorsport Group N rubber race bushings to replace the inner lower camber link arm bushings. These are a stiffer rubber version of the stock bushing - eliminating deflection and twist of the spring arm. This will result in a snappier feel and quicker response in the suspension and better handling. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a pair of bushings for both sides of the vehicle.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Show More Show Less
    Koni - Corporate Logo
    T#:555128
    Part#: 87451234KT
    Ships in 5 Business Days
    $ 887.99 USD
    Free Shipping
    $ 887.99 USD
    Free Shipping

    Koni suspension has taken their long running FSD (Frequency Selective Dampening) Technology and improved upon it to create their new Special Active suspension package. Improving handling while also improving the comfort of your BMW's ride, Special Active shocks and struts prove they are a top contender in the replacement suspension market.

    Koni's Special Active dampers adapt to the continuous imperfect road conditions in order to provide you with a more responsive and smoother ride. Thanks to multiple generations of suspension expertise, these shocks and struts rival expensive ride control systems of newer vehicles but at a cost that is significantly lower and a capability to be retrofitted into existing vehicles.

    Designed by Koni for the vehicle's original stock ride height, these are not intended to be used with lowering springs and will perform best when paired with stock springs.

    Koni Special Active Features:

    • KONI’s latest generation of Frequency Selective Damping Technology
    •  Improves safety and road holding
    •  Technology proven on over 1.5 million factory equipped vehicles
    •  Secure and stable feeling for spirited driving
    •  Unrivaled aftermarket solution can be fitted to most new and older cars
    •  Driving refinement for cars, trucks, SUVs, etc.
    •  Technology that rivals expensive Original Equipment electronic systems
    •  Performance for driver and comfort for passengers in one

    Activate your Koni Rebate!

    Fits the following BMWs:
    2005-2011 E9X BMW xDrive submodels

    Show More Show Less
    Koni - Corporate Logo
    T#:555126
    Part#: 87451234R
    Ships in 5 Business Days
    38% off MSRP $ 425.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 263.99 USD
    Free Shipping
    38% off MSRP
    $ 425.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 263.99 USD
    Free Shipping
    The Koni 87451234R is a premium adjustable shock absorber, designed to enhance handling, ride comfort, and stability. With precision damping control, it optimizes performance for both street and track driving. Engineered for select BMW models, it ensures a perfect fit and superior suspension dynamics.
    Show More Show Less

    Koni - Corporate Logo
    T#:369794
    Part#: E9XKONISPT
    In Stock
    $ 1,060.99 USD
    Free Shipping
    $ 1,060.99 USD
    Free Shipping

    KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast.
     

    • Big handling improvements
    • Reasonable ride quality
    • Re-buildable for custom vehicle setups
    • Best KONl shock for all lowering springs
    • Lifetime Warranty​

     

    Activate your Koni Rebate!

     

    This item fits the following BMWs:
    2008-2013 E82 BMW 128i 135i 135is
    2006-2011 E90 BMW 325i 328i 330i 335d 335i  - Sedan
    2007-2013 E92 BMW 328i 335i 335is  - Coupe
    2007-2013 E93 BMW 328i 335i 335is - Convertible

    Show More Show Less

    Koni - Corporate Logo
    T#:380890
    Part#: 87411484RSPORTKT
    In Stock
    $ 599.99 USD
    Free Shipping
    $ 599.99 USD
    Free Shipping

    KONl Sport struts and shocks are the industry leader for user adjustable damping for daily drivers to weekend warriors. KONl Sport's familiar yellow color has for decades meant superior motion control and adjustability for the discerning driving enthusiast. 

    • Big handling improvements
    • Reasonable ride quality
    • Re-buildable for custom vehicle setups
    • Best KONl shock for all lowering springs
    • Lifetime Warranty

    Activate your Koni Rebate!

    This item fits the following BMWs:

    E82 E88 128i 135i

    E9x 325i 328i 330i 335i

    Show More Show Less
    ECS Billet Rear Sway Bar Brackets With Polyurethane Bushings - Pair -...
    10X Entries Into Our F80 M3 Sweepstakes
    For use with OEM 13mm rear sway bar
    ECS - Corporate Logo
    T#:3180514
    Part#: 016921LA01
    Ships on Sep 29, 2026
    Sale - Save 10% $ 110.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 99.89 USD
    Free Shipping
    Sale - Save 10%
    $ 110.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 99.89 USD
    Free Shipping
    The ECS Tuning Billet Rear Sway Bar Mounting Kit was designed, engineered, tested and quality inspected thanks by their Research and Development team in Wadsworth, Ohio facility. ECS ensures that the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. This kit provides your vehicle with a more rigid mounting solution from the sway bar to chassis than the OEM steel brackets. With an improved sway bar mounting bracket and the included polyurethane sway bar bushings, you can expect to achieve an increase in rear sway bar effectiveness and less body roll as a result.
    Show More Show Less

    ECS Billet Rear Sway Bar Brackets With Polyurethane Bushings - Pair -...
    10X Entries Into Our F80 M3 Sweepstakes
    For use with Aftermarket 23mm rear sway bar
    ECS - Corporate Logo
    T#:3443018
    Part#: 016921LA09
    Ships on Sep 29, 2026
    Sale - Save 10% $ 113.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 102.59 USD
    Free Shipping
    Sale - Save 10%
    $ 113.99

    This product was last offered at the strikethrough price on
    06-14-2026

    $ 102.59 USD
    Free Shipping
    The ECS Tuning Billet Rear Sway Bar Mounting Kit was designed, engineered, tested and quality inspected thanks by their Research and Development team in Wadsworth, Ohio facility. ECS ensures that the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. This kit provides your vehicle with a more rigid mounting solution from the sway bar to chassis than the OEM steel brackets. With an improved sway bar mounting bracket and the included polyurethane sway bar bushings, you can expect to achieve an increase in rear sway bar effectiveness and less body roll as a result.
    Show More Show Less
    Packaged by Turner - Corporate Logo
    T#:582869
    Part#: T31126768989KT1
    In Stock
    Sale - Save 7% $ 927.99

    This product was last offered at the strikethrough price on
    05-04-2026

    $ 866.42 USD
    Sale - Save 7%
    $ 927.99

    This product was last offered at the strikethrough price on
    05-04-2026

    $ 866.42 USD

    Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

    This Level 2 kit replaces:

    Control Arms & Bushings
    Strut Mount
    Ball Joints
    Outer Tie Rods
    Sway Bar End Links & Bushings

    Show More Show Less

    IRP - Individual Racing Parts - Corporate Logo
    T#:2408491
    Part#: IRPRSB-90PU
    Special Order: No Guaranteed ETA
    $ 175.00 USD
    Free Shipping on orders $49 and up
    Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
    Show More Show Less

    IRP - Individual Racing Parts - Corporate Logo
    T#:2408498
    Part#: IRPRSB-9XMB2
    Special Order: No Guaranteed ETA
    $ 176.99 USD
    Free Shipping
    $ 176.99 USD
    Free Shipping
    Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
    Show More Show Less
    Meyle HD Front Control Arm - Right - E84, E90, E91, E92
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle HD - Corporate Logo
    T#:403994
    Part#: 31126768984
    Ships on Sep 23, 2026
    $ 125.99 USD
    Free Shipping
    $ 125.99 USD
    Free Shipping
    Control arm and bushing assembly.
    Turner Motorsport - Corporate Logo
    T#:340477
    Part#: TSU998062A
    Ships on Jan 18, 2027
    Sale - Save 25% $ 132.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 99.74 USD
    Free Shipping
    Sale - Save 25%
    $ 132.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 99.74 USD
    Free Shipping
    These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
    Show More Show Less


    Turner Motorsport - Corporate Logo
    T#:340469
    Part#: TSU9006RU1
    Ships on Jan 18, 2027
    Sale - Save 10% $ 274.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 247.49 USD
    Free Shipping
    Sale - Save 10%
    $ 274.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 247.49 USD
    Free Shipping

    Made in the USAIf you're installing racing rear shocks with a spherical bearing end you will need this adapter mount for the top of the rear shock. Spherical or rod-end bearings are common on race shocks but they are somewhat universal and mounts are not usually included. We designed and engineered these mounts for our E9X M3 and E90 328i IMSA/CTSCC racecars. Our cacing upper shock mount is machined out of aircraft grade aluminum with a tough anodize finish and high grade hardware. Due to the wide variety of spherical bearings and rod-ends found on race shocks, the bushing kit is sold seperately (see chart for bushing sizes).

    view larger

    Bearing Spacer Chart
    Optional BushingsBushing Kit Part#B=Bore Dia.W=Ball WidthOptional Bushings
    TSU9007B1515 mm12 mm
    TSU9007B50.500" inch.500" inch>

    E9X Racing Rear Spherical Upper Shock Mount Instructions

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible

    Show More Show Less
    Meyle HD Front Control Arm - Left - E84, E90, E91, E92
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle HD - Corporate Logo
    T#:403995
    Part#: 31126768983
    Ships on Sep 23, 2026
    $ 125.99 USD
    Free Shipping
    $ 125.99 USD
    Free Shipping
    Control arm and bushing assembly.
    Meyle Heavy Duty Front Left Sway Bar End Link - E9X E84
    5X Entries Into Our F80 M3 Sweepstakes
    We Price Match - Give Us A Call or Chat!
    Meyle HD - Corporate Logo
    T#:376764
    Part#: 31356768771
    Ships on Sep 23, 2026
    $ 28.99 USD
    Free Shipping on orders $49 and up

    Sway bar end links connect the swaybar to the rest of the suspension, preventing body roll and keeping everything in line in tight turns. This exposes these links to a high amount of stress and pressure, often leading to split bushings and sloppy body control and knocking noises. Meyle HD sway bar links are the perfect option to restore body control and eliminate knocking noises.

    Meyle is a German brand in business since 1958 and all of their products are TUV approved and meet or exceed ISO standards. Heavy Duty components are designed to provide significantly long lifespans than other aftermarket and stock OE components. Each part includes a 4 year warranty.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Features:

    • 4 Year Warranty

    • All metal ball joints are more reliable and longer lasting than stock

    • Bushings are solid rubber rather than fluid filled, providing longevity and handling feel improvements

    Fits the following BMWs:
    2006-2013 E9X BMW xDrive models
    2013-2015 E84 BMW xDrive models

    Show More Show Less

    Turner Motorsport - Corporate Logo
    T#:340476
    Part#: TSU9980548
    Ships on Jan 18, 2027
    Sale - Save 25% $ 132.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 99.74 USD
    Free Shipping
    Sale - Save 25%
    $ 132.99

    This product was last offered at the strikethrough price on
    06-13-2026

    Starting at $ 99.74 USD
    Free Shipping
    These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.
    Show More Show Less

    Bilstein - Corporate Logo
    T#:384715
    Part#: 19-214320KT
    Ships on Jan 18, 2027
    $ 528.00 USD
    Free Shipping
    $ 528.00 USD
    Free Shipping

    Bilstein strut/shock package for stock springs. Set includes 2 front Bilstein B4 OE Replacement struts and 2 rear Bilstein B4 OE Replacement shocks. Bilstein B4 Series gas pressure shocks and struts are specifically designed to be the economical choice for replacing the dampers on your vehicle. The B4 Series shocks and struts are rigorously engineered to meet OE standards and identically replicate the original ride quality of your vehicle. Shock dampening and rebound is set to match the original specifications from the factory to retain the same handling, stability, and ride comfort, but with the superior Bilstein quality for a long life and consistent performance in every condition. Lifetime warranty!

    This item fits the following BMWs:
    2008-2013 E9X BMW M3 (T#344138 is required for vehicles with EDC)

    Show More Show Less
    E82/E9x 1M/M3 B4 Front Strut Assembly - Left
    10X Entries Into Our F80 M3 Sweepstakes
    Bilstein - Corporate Logo
    T#:344702
    Part#: 22-214300
    Special Order: No Guaranteed ETA
    $ 169.00 USD
    Free Shipping
    $ 169.00 USD
    Free Shipping
    Bilstein B4 OE Replacement Series gas pressure shocks and struts are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.
    Show More Show Less

    ECS - Corporate Logo
    T#:388921
    Part#: E9X5251413T-SKT
    Ships on Feb 8, 2027
    Sale - Save 3% $ 262.99

    This product was last offered at the strikethrough price on
    06-13-2026

    $ 255.10 USD
    Free Shipping
    Sale - Save 3%
    $ 262.99

    This product was last offered at the strikethrough price on
    06-13-2026

    $ 255.10 USD
    Free Shipping

    This carbon fiber strut brace uses a flat-oval design with a hinge-less mounting system that makes this one of the best strut braces on the market (especially at the price!). Cornering forces can put stress on the chassis, especially when used with stickier tires and stiffer suspensions.Strut braces help to reduce chassis flex by tying the two strut towers together. This design is stronger than most strut braces that use a hinge on the end that allows additonal flex. This design has fixed end mounts that the strut bar is bolted to. The slim oval tube is 100% carbon fiber for excellent strength and rigidty. The entire assembly is less than 5lbs and installs in minutes.

    Fitment note: the end plates on this brace are closed. Some aftermarket front struts have an extra tall strut pin that will interfere with this brace.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
    2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
    2007-2013 E92 BMW 328i 328xi - Coupe
    2007-2013 E93 BMW 328i - Convertible

    Show More Show Less
    Megan Racing - Corporate Logo
    T#:381345
    Part#: MRSBM0210
    Special Order: No Guaranteed ETA
    Sale - Save 5% $ 299.00

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 284.05 USD
    Free Shipping
    Sale - Save 5%
    $ 299.00

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 284.05 USD
    Free Shipping

    Megan Racing introduces adjustable control arms, addressing the limitations of factory camber adjustment for BMW enthusiasts. The factory eccentric bolt provides about one degree of adjustment, typically adequate for daily-driven vehicles at factory ride height. However, enthusiasts understand that factory alignment settings may not optimize handling or tire wear. Lowered vehicles face even greater challenges, requiring adjustments beyond what eccentrics can offer. Megan Racing's adjustable control arms provide a solution, designed to tackle issues associated with lowered cars.

    • Improved handling and tire wear for lowered vehicles
    • Adjustable control arms for precise alignment settings
    • Durable construction suitable for both daily driving and track use
    • Constructed of high-strength steel alloys for durability and lightweight
    • Maximum Arm Length: 11 13/16"
    • Minimum Arm Length: 9 7/8"
    Show More Show Less

    Genuine BMW - Corporate Logo
    T#:15399
    Part#: 31312284005
    Back Ordered
    9% off MSRP $ 594.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 541.99 USD
    Free Shipping
    9% off MSRP
    $ 594.99

    MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

    $ 541.99 USD
    Free Shipping
    Replace your blown front strut with a Genuine BMW strut for guaranteed high quality and reliability.

    Rein Control Arm Bushing Kit - Front Lower Inner Forward - E82, E88, ...
    Located in the curved control arm or "thrust" arm
    2X Entries Into Our F80 M3 Sweepstakes
    Rein - Corporate Logo
    T#:592172
    Part#: 31120393540
    Back Ordered
    Sale - Save 5% $ 57.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 55.09 USD
    Free Shipping on orders $49 and up
    Sale - Save 5%
    $ 57.99

    This product was last offered at the strikethrough price on
    08-31-2026

    $ 55.09 USD
    Free Shipping on orders $49 and up
    Fits left or right side - sold individually.
    Race Polyurethane Rear Upper Control Arm Bushings, Outer Position Set...
    Used in the outer position of the rear upper control arm and rear guide rod
    Powerflex Black Series - Corporate Logo
    T#:376499
    Part#: PFR5-412BX2
    Back Ordered
    $ 122.99 USD
    Free Shipping
    $ 122.99 USD
    Free Shipping

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

    Show More Show Less
    Lemforder - Corporate Logo
    T#:362254
    Part#: 33316758259
    Back Ordered
    $ 27.99

    This product was last offered at the strikethrough price on
    05-07-2026

    $ 22.99 USD
    Free Shipping on orders $49 and up
    $ 22.99 USD
    Free Shipping on orders $49 and up

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Show More Show Less