Home
Wheels
Wheel Bolts & Stud Conversions

BMW Wheel Bolts, Wheel Studs and Nuts for BMW 3 Series E90 (2006-2011)

Any time you use a wheel spacer you MUST have a longer wheel bolt or wheel stud to properly fasten the wheel to the hub. We offer extended wheel spacer bolts in silver and black finish in a variety of lengths to fit many spacer sizes. We're up to date on the different thread sizing as well - 12x1.5, 14x1.25, and 14x1.5 so we can supply wheel bolts for just about any BMW or MINI.

Add the spacer thickness to your stock bolt length and that is your ideal extended bolt length. We generally sell bolts by spacer thickness but there may be exceptions. It's always best to measure from the wheel bolt you're currently using. When we list the total length of a bolt it's from the base of the mounting seat to the tip. To be considered safe, a 12x1.5 wheel bolt needs 10mm (6.5 turns) of thread engaged; a 14x1.25 or 14x1.5 bolt needs 12mm (9.0 and 7.5 turns) of engaged thread.

Sub-Categories

Sort By:

Lug Bolt Kit - Set Of 10 - 39mm

Call In Or Chat For Best Price!

T#:23185028

Part#: D220-0012

In Stock

11% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

Qty

11% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD

Add to Wish List

VTT M12 Titanium Wheel Stud Kits

T#:7292019

Part#: TISTUD20125

In Stock

Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

Sale - Save 7%

$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

BMW Wheel Lock Removal Tool - Replacement Spline Tool - 556946012 ...

T#:24344781

Part#: 55-6946-012-M744

Ships in 7 Business Days

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Used for wheel lock removal

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

T#:215382

Part#: 12-010BC

In Stock

$ 7.99 USD

Add to Wish List

Qty

$ 7.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock red threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of high-temp, high-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Series 13-OR Features:

color: red/orange

Anaerobic Thread-locking Compound

permanent

high strength

high temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 262.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

T#:215383

Part#: 11-010BC

In Stock

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Threadlocker is essential when doing any work to your car, especially prepping it for the track. Loose bolts should never happen! If you are a do-it-youselfer, or do much wrench turning, then you know about threadlocker (generically known as "locktite" or by the brand name Loctite). You also know a little goes a long way. This small bottle of Palm Labs Turbo-Lock blue threadlock is perfect for that small job -- or a few small jobs! This tube has 10 mL (0.34 fluid ounces) of moderate temp, medium-strength threadlocker. This bottle comes with two ways to apply: with a squeeze or with the included brush. There are just too many different uses for this, and no mechanic or DIYer, should be without some in his or her toolbox.

Red or Blue threadlocker? Red is the highest strength so use it when the fastener will not be removed regularly or ever again. The Red will need a great amount of force to break free and maybe even heat. Blue is the medium strength and will break free with hand tools. Use it for fasteners that need extra locking protection but will be removed / disassmebled on a semi-regular basis.

Palm Labs Turbo-Lock Blue Features:

color: blue

Anaerobic Thread-locking Compound

permanent

medium strength

moderate temperature resistant

oil resistant

primerless

acceptable up to 20mm (3/4") bolts
Equivalent or superior to Loctite 242.

MSDS Data Sheet
Technical Data Sheet

Show More Show Less

Fall-Line Motorsport E9X M3 / E82 1M Motorsport Hub Retrofit Kit ...

T#:28038193

Part#: FLM-E9XM-1BHUB

Ships in 3 Business Days

$ 1,695.00 USD

Add to Wish List

Qty

$ 1,695.00 USD

Add to Wish List

*MADE TO ORDER; ALLOW 2-3 BUSINESS DAYS* The E9X M3 / E82 1M have unquestionably become modern-day icons for their formidable street and track dominance. Both of these cars are equipped with M12x1.5 hardware from the factory, leaving them precariously prone to failure during rigorous track sessions and consequently, a potentially dangerous and damaging fate. Fall-Line Motorsport has developed a hub retrofit kit that will convert your E9X M3 / E82 1M to the more robust M14x1.25 hardware as well as shave rotational mass from each corner. OE M12x1.5 Front Hub Assembly: 3293g FLM M14x1.25 Front Hub Assembly: 2957g (-0.74lbs per corner) OE M12x1.5 Rear Hub Spindle: 1686g FLM M14x1.25 Rear Hub Spindle: 1441g (-0.54lbs per corner) Each hub kit comes pre-assembled, moly-coated, and includes everything you'll need for a truly plug and play retrofit*, including all new hardware. NOTE: *OEM rotor hats and select aftermarket solutions may require drilling out rotor hats to accommodate M14 hardware. Please also verify your desired wheel set can accept M14. Stud Kit pictured is sold separately. What is moly coating? Molybdenum Disulfide Coatings (MoS2 coatings), also known as Moly Coatings, are a dry film lubricant that are commonly used in applications where load carrying capacity, operating pressure and coefficient of friction are primary concerns. This coating provides effective lubrication in a wide range of loads, in many cases exceeding 250,000 psi. Moly coatings lubricate sacrificially by transferring lubricant between the two mating surfaces, which helps to reduce wear and coefficient of friction.

Show More Show Less

Extended Wheel Bolt - M12x1.5 - 35mm

T#:50899204

Part#: BFI-906-LUG

Ships on Aug 12, 2026

$ 4.99 USD

Add to Wish List

Qty

$ 4.99 USD

Add to Wish List

Specifically engineered for vehicles utilizing a wheel stud conversion.

Select Vehicle

Purpose

Brand

View All Brands

Project Cars

SELECT YOUR BMW

BMW Wheel Bolts, Wheel Studs and Nuts for BMW 3 Series E90 (2006-2011)

Sub-Categories

Lug Bolt Kit - Set Of 10 - 39mm

VTT M12 Titanium Wheel Stud Kits

BMW Wheel Lock Removal Tool - Replacement Spline Tool - 556946012 ...

Turbo-Lock Red High-Strength Threadlocker (10ml Bottle)

Turbo-Lock Blue Medium Threadlocker (10ml Bottle)

Fall-Line Motorsport E9X M3 / E82 1M Motorsport Hub Retrofit Kit ...

Extended Wheel Bolt - M12x1.5 - 35mm

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results