BMW Brakes & Brake Parts for BMW 3 Series E90 (2006-2011)

Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:348112

Part#: 34211161806KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Front Stainless Steel Brake Lines -E90 E92 E82 E88 E9x E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582981

Part#: 022756TMS05

In Stock

Sale - Save 10% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Qty

Sale - Save 10%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.09 USD

Add to Wish List

Turner has developed a zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Rear Stainless Steel Brake Lines - Non-M E8X/E9X/F2X/F3X

10X Entries Into Our F80 M3 Sweepstakes

T#:582985

Part#: 022756TMS01

In Stock

Sale - Save 5% $ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 100.99

This product was last offered at the strikethrough price on
06-14-2026

$ 95.94 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Stainless Brake Rotor Set Screw (34111123072) - Set Of 4

10X Entries Into Our F80 M3 Sweepstakes

T#:387871

Part#: 001359ECS01AX4KT

In Stock

Sale - Save 25% $ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

Qty

Sale - Save 25%

$ 27.99

This product was last offered at the strikethrough price on
06-13-2026

$ 20.97 USD

Add to Wish List

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws.

Turner Front Stainless Steel Brake Lines - E9x M3/ E8x 1M

10X Entries Into Our F80 M3 Sweepstakes

T#:582983

Part#: 022756TMS03

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a new zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Mid Stainless Steel Brake Lines - E8x E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:582984

Part#: 022756TMS02

In Stock

Sale - Save 15% $ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 118.99

This product was last offered at the strikethrough price on
06-14-2026

$ 101.14 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Rear Stainless Steel Brake Lines - E82 1M E90 E92 E9x M3 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:582986

Part#: 022756TMS04

In Stock

Sale - Save 10% $ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Qty

Sale - Save 10%

$ 107.99

This product was last offered at the strikethrough price on
06-14-2026

$ 97.19 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport - Stainless Steel Brake Lines - Complete Kit - E8x ...

10X Entries Into Our F80 M3 Sweepstakes

T#:583485

Part#: 022756TMS10

In Stock

Sale - Save 15% $ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Qty

Sale - Save 15%

$ 345.99

This product was last offered at the strikethrough price on
06-14-2026

$ 294.07 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E8x/E9...

10X Entries Into Our F80 M3 Sweepstakes

T#:583484

Part#: 022756TMS09

In Stock

Sale - Save 10% $ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Qty

Sale - Save 10%

$ 338.99

This product was last offered at the strikethrough price on
06-14-2026

$ 305.07 USD

Add to Wish List

Turner has developed a superior zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Performance Parking Brake Actuator/Expanding Lock -...

10X Entries Into Our F80 M3 Sweepstakes

T#:8933505

Part#: 013313LA01KT

Ships on Nov 3, 2026

Sale - Save 25% $ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 208.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.74 USD

Add to Wish List

Our Performance Parking Brake Actuator improves the ratio of your actuator from 3:1 to 4:1, which provides better clamp load on the parking brake shoes and increases the longevity of your parking brake system! Plus, if you are into drifty things, this will give you a little better control over your parking brake. Not only does our 4130 Chromoly steel zinc-coated parking brake actuator improve the overall parking brake feel, but it also creates less stress on your parking cables. This is the perfect upgrade for your parking brake system whether you are currently replacing components, or just looking to improve the longevity of your existing system.

Show More Show Less

Brake Bleeder Bottle with Magnet

10X Entries Into Our F80 M3 Sweepstakes

T#:302462

Part#: BBM

In Stock

Sale - Save 5% $ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

Qty

Sale - Save 5%

$ 30.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.44 USD

Add to Wish List

The Brake Bleeder Bottle with Magnet is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a magnet that is attached to the bottle. The magnet allows the bottle to easily attach to the car, nearby toolbox, or other metal services so you don't have to worry about the bottle while you bleed your brakes! This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Magnet is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 338x26mm - E9X 325/328...

For vehicles with BMW Performance brake kit featuring 338x26mm rotors

10X Entries Into Our F80 M3 Sweepstakes

T#:600076

Part#: 024398TMS02AKT

In Stock

Sale - Save 3% $ 1,163.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,129.07 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,163.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,129.07 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Brake Bleeder Bottle with Lanyard

10X Entries Into Our F80 M3 Sweepstakes

T#:302461

Part#: BBL

Ships on Nov 2, 2026

Sale - Save 5% $ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

Qty

Sale - Save 5%

$ 28.99

This product was last offered at the strikethrough price on
06-13-2026

$ 27.54 USD

Add to Wish List

The Brake Bleeder Bottle with Lanyard is an indispensable tool for automotive enthusiasts and professionals seeking a hassle-free and efficient solution for bleeding brake systems. This innovative brake bleeder bottle offers several features that make the brake bleeding process smoother and more convenient than ever before. One of the standout features of this brake bleeder bottle is its "park" feature. This feature is designed to prevent spills and messes during the brake bleeding process. It allows you to secure the hose in a stable position, ensuring that it stays in place and doesn't accidentally tip over or spill brake fluid. This not only saves time but also helps maintain a clean and organized work environment, which is crucial when working on brake systems. The "park" feature is complemented by a metal lanyard that comes with the bottle. This metal lanyard serves as an additional means of keeping the bottle stable and in one place. You can attach the lanyard to a fixed point in your workspace, such as a vehicle frame or a nearby hook, and then secure the bottle to it. This ensures that the bottle remains securely in position throughout the brake bleeding process, minimizing the risk of accidents and fluid spills. The Brake Bleeder Bottle with Lanyard is not only practical but also durable. It is built to withstand the rigors of automotive maintenance and is compatible with a wide range of brake systems. Its user-friendly design makes it suitable for both beginners and experienced technicians, allowing for efficient and mess-free brake bleeding.

Show More Show Less

Turner Motorsport Rear TrackSport Rotor Set - 336x22mm - E84 35ix, E9...

10X Entries Into Our F80 M3 Sweepstakes

T#:600079

Part#: 024398TMS03AKT

In Stock

Sale - Save 3% $ 1,129.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,096.09 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,129.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,096.09 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Motorsport Stainless Steel Brake Lines - Complete Kit - E9x Xi...

10X Entries Into Our F80 M3 Sweepstakes

T#:583875

Part#: 022757TMS09

In Stock

Sale - Save 10% $ 332.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.67 USD

Add to Wish List

Qty

Sale - Save 10%

$ 332.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.67 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner SS brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Front Stainless Steel Brake Lines - E90 E92 E9x

10X Entries Into Our F80 M3 Sweepstakes

T#:582980

Part#: 022757TMS01

In Stock

Sale - Save 5% $ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.34 USD

Add to Wish List

Qty

Sale - Save 5%

$ 112.99

This product was last offered at the strikethrough price on
06-14-2026

$ 107.34 USD

Add to Wish List

Turner has developed a proprietary zinc-nickel coating finish with nearly twice the salt-spray corrosion resistance of a standard plating. Turner Stainless brake lines also feature new low profile connecting hardware, for a cleaner mounted look. Get the brake lines that will continue to look as good as they feel!

-Fully compliant with DOT Standards (MVSS-1006) -Lines burst-tested to 3000psi (maximum tested pressure from a BMW braking system is 1200psi) -Zinc-Nickel coating for maximum corrosion resistance -Low profile connectors for clean and recessed look

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 348x30mm - E9X 335i/i ...

10X Entries Into Our F80 M3 Sweepstakes

T#:600073

Part#: 024398TMS01AKT

In Stock

Sale - Save 8% $ 1,306.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.69 USD

Add to Wish List

Qty

Sale - Save 8%

$ 1,306.03

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.69 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Additionally, thanks to these rotor's inherent two-piece design and the included Aluminum rotor hats, these remove almost 20% of the rotational mass versus stock rotors. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Motorsport Front TrackSport Rotor Set - 360x30mm - E9X M3, E82...

10X Entries Into Our F80 M3 Sweepstakes

T#:600081

Part#: 025518TMS01AKT

Ships on Jan 22, 2027

Sale - Save 3% $ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

Qty

Sale - Save 3%

$ 1,319.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,280.39 USD

Add to Wish List

When considering a brake rotor upgrade, it's important to factor in their specific use. On the road, a solid rotor is a simple, yet cheap and effective solution that is perfectly capable of handling daily-driver requirements. When you start taking your BMW to the track, things become a little more complicated. Extended periods of aggressive driving causes the amount of heat in the rotors to build up, and as the temperature of the rotors increase, the metal begins to expand. With solid rotors, this can lead to numerous issues such as warping of the rotors, unexpected cracking along the inner "ring" or friction surfaces, and increased brake fade. This is where Two-Piece Floating rotors start to shine. Two-Piece rotors were designed specifically for high-performance applications and are significantly more resistant to the effects of heat and friction, lessening the negative effects typically seen with standard rotors. The separation of the friction disk and the rotor hat allows for the rotor ring to expand and helps prevent heat from traveling into other sensitive braking components that could be damaged from prolonged exposure to harsh conditions. Needless to say, we aren't a fan of our track days being cut short due to braking issues, so we decided to create our very own performance-oriented TrackSport Rotors! Our TrackSport rotors feature a full floating two-piece design and slotted grooves to allow smooth, consistent braking force and easy expulsion of gases and dust created by the brake pads and rotors under heavy braking. This means that no matter the conditions, you can expect the braking feel to remain consistent, even throughout long periods of abuse. Features & Specifications: OE Fitment and Installation Two-Piece Fully Floating Design Heat-treated rotor rings for extended life and reduced wear Factory-applied coating prevents rust and corrosion Lightweight design eliminates excess rotational mass Slotted grooves expel brake dust and gases Internal vanes increase cooling and braking performance

Show More Show Less

Turner Motorsport Direct-Fit Hydro E-Brake Kit - E9X

10X Entries Into Our F80 M3 Sweepstakes

T#:54033237

Part#: 057047LAKT

In Stock

$ 560.99

This product was last offered at the strikethrough price on
09-16-2026

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

Engineered for relentless track abuse, the Turner Motorsport Hydraulic E-Brake Mount delivers direct, uncompromising rear-wheel lockup for the E9X chassis. Forget flimsy universal brackets and custom fab work, this is a purpose-built, high-precision bolt-in assembly developed in-house using advanced 3D chassis scanning and CAD modeling to guarantee exact fitment and maximum leverage.

Constructed around a rigid 11-gauge steel base plate, this mount eliminates structural deflection under heavy loading, ensuring consistent hydraulic pressure when initiation matters most. The heart of the system relies on a 6061 billet aluminum bell-crank pivot paired with Teflon-lined spherical rod ends, delivering instant, slop-free actuation. By orienting the master cylinder longitudinally alongside the shifter, line plumbing and cylinder maintenance remain completely accessible, all while requiring only minimal trimming to the factory console. Built lightweight, durable, and track-ready, it’s the definitive performance upgrade for drivers demanding total chassis control.

Show More Show Less

G-Stop Stainless Steel Brake Line Kit for E9X M3 - Front & Rear ...

T#:26038549

Part#: 31053

In Stock at Vendor

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Upgrade your BMW's braking system with Goodridge G-Stop Brake Line Kits, crafted from premium-quality materials for superior performance and safety. These kits feature -03 PTFE hose construction, which enhances brake feel, eliminates sponginess, and reduces stopping distances for consistent and efficient braking in all conditions.

Enhanced brake feel and pedal response over factory lines
Shorter stopping distances for improved safety
Virtually eliminates brake pedal "chatter" with ABS systems
FMVSS106 and TUV approved for DOT compliance
Abrasion and corrosion-resistant for long-lasting durability

Show More Show Less

Vargas Turbo Technologies Line Lock Kit - E82/88 E9X

2X Entries Into Our F80 M3 Sweepstakes

T#:638033

Part#: VPP-E9X-LL

Ships in 9 Business Days

$ 524.99 USD

Add to Wish List

Qty

$ 524.99 USD

Add to Wish List

Need a better way to warm your tires for a race other than foot braking? VTT has the solution for you. This line lock kit utilizes two solenoids to lock your front brakes, allowing you to do a perfect burnout every single time! Whether you’re warming up your tires for the drag strip or just trying to impress your buddies and look cool, the Vargas Turbo Line Lock Kit is just what you need.

Show More Show Less

Vargas E9/8X Rear Drag Brake Conversion Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:43075369

Part#: VTT-BRAKE-E9X-6-

Ships in 10 Business Days

$ 1,299.99 USD

Add to Wish List

Qty

$ 1,299.99 USD

Add to Wish List

Upgrade your rear brake rotors and calipers to accommodate 15' wheels.

VTT E Chassis Ultimate Front Drag Brake Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:10518771

Part#: VTT-E-ULTFRDBK

Ships in 10 Business Days

Starting at $ 1,942.99 USD

Add to Wish List

Starting at $ 1,942.99 USD

Add to Wish List

Looking to make your E/F Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17' or 15' wheels s in the front? Want to drop OVER 62lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Front Drag kit for the E/F Series BMWs. This kit will allow you to run the wheel/tire combo you need to drop your ET’s all while putting the car on a significant diet over the stock front brake set up. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 2 different variations, with two different caliper Options for each. We HIGHLY suggest 6-Piston Calipers for street driving, and 1/2 mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. PLEASE NOTE: E SERIES WILL ALLOW 15' WHEELS ON THE FRONT WITH NO MODIFICATIONS. CAREFUL SELECTION OF OFFSET WILL BE NEEDED TO CLEAR THE INBOARD STRUT, TOO MUCH NEGATIVE OFFSET WILL NOT CLEAR WITHOUT SPACERS. This kit comes in 2 different variations, with two different caliper sizes for each HD Version: Normal street driving, and racing duties Wilwood Spec 37 HD rotors Genuine Wilwood Dyna-Pro Calipers Genuine Wilwood BP-20 Brake Pads DOT Approved Brake lines VTT CNC Rotor Hats VTT CNC Brackets Brake Sensor CEL ELiminator harness Race Version: Recommended Race Duties only, not for street use Genuine Wilwood Ultra-Lite Scalloped rotors Genuine Wilwood Dyna-Lite Calipers Genuine Wilwood BP-20 Brake Pads DOT Approved Brake lines VTT CNC Rotor Hats VTT CNC Brackets Brake Sensor CEL ELiminator harness Weight saving information VTT Dragkit vs OEM Per Side: OEM Steel kit 46lbs per side – Total 84 lbs VTT HD Kit Spec 37 Rotors- 16.1 Lbs per side – 30.3 Lbs total – 53.7 Lbs savings over Stock steel kit VTT Scalloped kit – 10.7 Lbs per side – 21.4 Lbs total – 62.6 Lbs savings over Stock steel kit!!! More weight information: HD Rotor Spec 37- 9 Lbs Scalloped Rotor – 5.1 Lbs Dyna Lite Caliper 3.2 Lbs DynaPro Caliper 3.6Lbs DynoPro 6 Piston Caliper 5.1 Lbs Rotor Hat 1Lb Pads (one side) 1.0 Lbs Disclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing. Scalloped kits should never be used for street driving, and are ONE-PASS COOLDOWN DRAG RACING ONLY, EVEN IN THIS ENVIRONMENT, THEY MAY CRACK IF USED TOO AGGRESSIVELY. Always drive within your limits!

Show More Show Less

Vargas Ultimate Front Drag Brake Kit - Silver - BMW E8X, E9X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51848533

Part#: VTT-FB-SIL31

Ships in 10 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The VTT Ultimate Front Drag Brake Kit is the definitive solution for BMW E-Series owners looking to shed serious weight and improve their ETs at the drag strip.

Vargas Ultimate Front Drag Brake Kit - Black - BMW E8X, E9X

2X Entries Into Our F80 M3 Sweepstakes

T#:51848526

Part#: VTT-FB-BLK32

Ships in 10 Business Days

$ 1,399.99 USD

Add to Wish List

Qty

$ 1,399.99 USD

Add to Wish List

The VTT Ultimate Front Drag Brake Kit is the definitive solution for E-Series BMW owners looking to shave seconds off their ETs in 1/4 and 1/2-mile racing.

Vargas Ultimate Front Drag Brake Kit - Silver - BMW E8X, E9X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51848530

Part#: VTT-FB-SIL11

Ships in 10 Business Days

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Vargas Ultimate Front Drag Brake Kit focuses on optimizing the power-to-weight ratio through precision braking components.

Vargas Ultimate Front Drag Brake Kit - Black - BMW E8X, E9X

2X Entries Into Our F80 M3 Sweepstakes

T#:51848525

Part#: VTT-FB-BLK12

Ships in 10 Business Days

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Vargas Ultimate Front Drag Brake Kit is the definitive solution for BMW E-Series owners looking to shed serious weight and improve track times.

Vargas Ultimate Front Drag Brake Kit - Red - BMW E8X, E9X

2X Entries Into Our F80 M3 Sweepstakes

T#:51848528

Part#: VTT-FB-RED13

Ships in 10 Business Days

$ 1,949.99 USD

Add to Wish List

Qty

$ 1,949.99 USD

Add to Wish List

The Vargas Ultimate Front Drag Brake Kit is the premier solution for BMW E-Series owners looking to dominate the 1/4 and 1/2 mile.

Vargas Rear Drag Brake Conversion Kit - Silver - Plain Rotors - BMW E...

2X Entries Into Our F80 M3 Sweepstakes

T#:51883705

Part#: VTT-E9RDB3SIL1

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The VTT E9X Ultimate Rear Drag Brake Conversion Kit is the definitive solution for BMW 335i owners looking to dominate the drag strip.

Vargas Rear Drag Brake Conversion Kit - Black - Plain Rotors - BMW E9...

2X Entries Into Our F80 M3 Sweepstakes

T#:51883707

Part#: VTT-E9RDB6BLK1

Ships in 10 Business Days

$ 949.99 USD

Add to Wish List

Qty

$ 949.99 USD

Add to Wish List

The VTT Rear Brake Conversion Kit is a purpose-built performance upgrade designed specifically for E9X 335i owners looking to dominate the drag strip.

Vargas Replacement Rotor & Bolts (No Hats) - 11.75" HD - BMW G8X, F8X...

For vehicles with Vargas Brake Kit

2X Entries Into Our F80 M3 Sweepstakes

T#:52164943

Part#: VTT-ROTOR-KIT-6

Ships in 10 Business Days

$ 147.99 USD

Add to Wish List

Qty

$ 147.99 USD

Add to Wish List

The VTT HD Replacement Rotor Kit is the ideal solution for enthusiasts already running a Vargas lightweight brake system who need to refresh their hardware.

Project Cars

SELECT YOUR BMW

BMW Brakes & Brake Parts for BMW 3 Series E90 (2006-2011)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results